Acti A956 Bruksanvisning

Acti övervakningskamera A956

Läs nedan 📖 manual på svenska för Acti A956 (2 sidor) i kategorin övervakningskamera. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

A956 Outdoor Speed Dome Camera Quick Installation Guide

This guide is for quick installing and connecting A956 Outdoor Speed Dome Camera. For more details, please refer to

the Hardware Manual.

Installation Notices

 This camera must be installed by qualied personnel and the installation should conform to all local codes.

 Do not replace batteries of the camera. Risk of explosion may occur if the battery is replaced by an incorrect type.

 To use an external power supply, please contact the camera manufacturer to conrm that the power supply

complies with the LPS requirements and shares the same power specications with the camera.

 For safety concern, please hook up the camera with the anti-drop chain of the

pendant when installing the camera. For more information about pendant and

anti-drop chain, please contact Sales.

Camera’s Connectors

No.

Connector

Denition

Remarks

RJ- Port 45

For network and UPoE connections

#Please contact the manufacturer for

compatible PoE injector.

Power (AC24V)

AC24V power connection

Reset Button

Press the button with a proper tool for at least 20 seconds to restore the system.

Audio/Alarm I/O

& RS-485 Connector*

Audio/Alarm I/O

& RS-485 connection

# Do connect external power supply to NOT

the alarm I/O connector of the camera.

BNC*

For analog video output

SD Card Slot

Insert the SD card into the card slot to store videos and snapshots. Do not remove

the SD card when the camera is powered on.

(*) Optional

NOTE: It is not recommended to record with the SD card for 24/7 continuously, as it may not be able to

support long term continuous data read/write. Please contact the manufacturer of the SD card for information

regarding the reliability and the life expectancy.

Power Connection

To power up the camera, connect the AC24V power adaptor to the power connector of the camera and the power

outlet. Refer to the diagram and pin denition below for AC24V power connection.

Denition

AC24V L

GND

AC24V N

Alternatively, users can use an Ethernet cable and connect it to the RJ-45 port of the camera and an UPoE 60W

switch.

Ethernet Cable Connection

Connect one end of the Ethernet cable to the RJ-45 connector of the camera, and plug the other end of the cable to

the network switch or PC.

NOTE: In some cases, Ethernet crossover cable might be needed when connecting the camera directly to the

PC.

NOTE: Check the status of the link indicator and activity indicator LEDs. If the LEDs are unlit, please check

the LAN connection.

Green Link Light indicates good network connection.

Orange Activity Light ashes for network activity indication.

NOTE: The ITE is to be connected only to PoE networks without routing to the outside plant or equivalent

description.

Audio/AIarm I/O & - Connection RS 485

Please refer to the diagram and pin denition tables below for audio/alarm I/O & RS-485 connection.

Denition

Audio Out

Alarm Out B1

Alarm In 4

GND (Alarm I/O and RS-485)

GND (Audio I/O)

Alarm Out B2

Alarm In 3

Audio In

Alarm Out A1

RS-485 D+ (Optional)

Alarm In 2

Alarm Out A2

RS-485 D- (Optional)

Alarm In 1

V20220122

Before Login to the Camera

A client program will be automatically installed to the PC when connecting to the camera. Before logging in to the

camera, please ensure downloading the ActiveX control is allowed by either changing the ActiveX controls and

plug-ins or setting Internet s security level to default. For further details, please refer to the User s Manual. ’ ’

ActiveX Controls and Plug-ins Settings

Internet Security Level

Step 1: Start the Internet Explorer (IE).

Step 2: Select <Tools> from the main menu of the

browser. T click on <Internet Options hen >.

Step 3: Click on the <Security> tab and select

<Internet>, and click on <Custom level> to

change ActiveX settings.

Step 4: Set ActiveX controls and plug-ins items to “ ”

<Prompt> or <Enable>.

Step 1: Start the IE Internet Explorer (IE).

Step 2: Select <Tools> from the main menu of the

browser. T click on <Internet Options hen >.

Step 3: Click on the <Security> tab and select

<Internet>.

Step 4: Down the page, click on <Default Level> and

<OK> to conrm the setting. Close the browser

window, and open a new one later for

accessing the IP camera.

NOTE: is strongly recommended using Microsoft Internet Explorer 10.0 or later version to connect the It

camera.

Camera Login

The default IP address of the camera is: 192.168.0. 010 . Therefore, to access the camera for the rst time, please set

the IP address of the PC as: 192.168.0.XXX; for example:

IP Address: 192.168.0.99

Subnet Mask: 255.255.255.0

 Type the corresponding camera IP address into the URL eld on the web browser and hit "Enter".

 For initial login, use the default username, “ ”admin , and then setup the password. Follow the on-screen instructions

to do so. This username and password will be used for succeeding login. Note that the username and password

are case sensitive.

Default username: admin Password : (user must setup rst)

Install the ActiveX Control

 After connecting to the camera, the request for installing the ActiveX control will appear just below the URL bar.

 Right click on the information bar and click on <Install ActiveX Control > to permit ActiveX control installation. …

 In the pop-up security warning window, click on <Install> to start downloading Viewer software on the PC. DC

 Click on <Finish> after DCViewer installation is completed.

Browser-based Viewer

The main page of the IP camera user interface is as shown below.

A956

Outdoor Speed Dome Camera

Quick Installation Guide

Produktspecifikationer

Varumärke:	Acti
Kategori:	övervakningskamera
Modell:	A956
Vikt:	45 g
Förpackningens bredd:	78 mm
Djuppackning:	240 mm
Förpackningshöjd:	158 mm
Strömförsörjning:	7.5V DC, 500mA
Antal USB 2.0-portar:	1
Antal Ethernet LAN (RJ-45)-portar:	1
Anslutning för nätadapter:	Ja
Nätverksprotokoll som stöds:	TCP/IP
Nätverk redo:	Ja
Mått (B x D x H):	55 x 75 x 20 mm
Förvaltningsprotokoll:	SNMP
Typ av nätverksanslutning:	Ethernet LAN