ADDAC System ADDAC308 Bruksanvisning

Läs nedan 📖 manual på svenska för ADDAC System ADDAC308 (5 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
ADDAC308 LIGHT TO CV USER’S GUIDE
December.2020Revision.01
Welcome to:
page 2ADDAC SYSTEM
DESCRIPTION
Another addition to our ADDAC300s Expressive Controls series
This module converts the incoming light hitting an external light sensor
into 2 Bipolar CV Streams:
Output: More light > Higher CV output
Inverted Output: More light > Lower CV output
The external sensor is enclosed in a jack socket in order to be used
with any standard jack cable and be able to place it in any place
outside the eurorack frame.
There are several controls to adjust the CV Output’s signals:
Sensitivity:
Adjusts the Light Sensor sensitivity to Light
The Higher the sensitivity the better it responds to low light situations
Response:
3 fixed settings (medium/fast/slow) to set the slew applied to the raw
signal coming from the sensor.
Gain:
Sets the gain for both outputs
Offset:
Adjusts the Offset for the main Output.
Inverted Offset:
Adjusts the Offset for the Inverted Output.
Specs:
4hp
±50mA
4.5cm deep
CONTROLS DESCRIPTION
ADDAC308 User’s Guide
page 3ADDAC SYSTEM
Output CV Gain
Sensor Input
Light Sensitivity Setting
Couter Clockwise : Less Sensitivity
Clockwise : More Sensitivity
CV Offset
Inverter CV Offset
LIGHT RESPONSE SLEW
Medium / Fast / Slow
CV Output
Inverted CV Output
Bipolar Monitor LEDs
Bipolar Monitor LEDs

Produktspecifikationer

Varumärke: ADDAC System
Kategori: Inte kategoriserad
Modell: ADDAC308

Behöver du hjälp?

Om du behöver hjälp med ADDAC System ADDAC308 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad ADDAC System Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer