Adwa AD101 Bruksanvisning

Adwa Mätutrustning AD101

Läs nedan 📖 manual på svenska för Adwa AD101 (2 sidor) i kategorin Mätutrustning. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
ERROR MESSAGES
Ec: use a fresh buffer solution.
Eb: batteries should be replaced.
SPECIFICATIONS
AD100
Range -2.0 to 16.0 pH
Resolution 0.1 pH
Accuracy ± 0.1 pH
Temp.compensation Automatic
Environment 0 - 50 °C
95 % Relative
Humidity
Battery Life/Type 250 Hrs./4x1.5 V
Dimensions 173 x 41 x 22 mm
AD101
Range -2.00 to 16.00 pH
Resolution 0.01 pH
Accuracy ± 0.02 pH
Temp.compensation Automatic
Environment 0 - 50 °C
95 % Relative
Humidity
Battery Life/Type 250 Hrs./4x1.5 V
Dimensions 173 x 41 x 22 mm
USER MANUAL
AD100 & AD101
pH Testers
• Microprocessor-based pH tester
• Automatic temperature compensation
• Splash-proof keypad
• Automatic shut-off
ACCESSORIES
AD70004P pH 4.01 buffer solution
20 ml sachet (25 pcs.)
AD70007P pH 7.01 buffer solution
20 ml sachet (25 pcs.)
AD70010P pH 10.01 buffer solution
20 ml sachet (25 pcs.)
Dear Customer,
Thank you for choosing an ADWA product.
Please read carefully this manual before
starting operations.
For additional technical information, please
e-mail us at:
sales@adwainstruments.com
ISTRAD100 09/14
www.adwainstruments.com
ERROR MESSAGES
Ec: use a fresh buffer solution.
Eb: batteries should be replaced.
SPECIFICATIONS
AD100
Range -2.0 to 16.0 pH
Resolution 0.1 pH
Accuracy ± 0.1 pH
Temp.compensation Automatic
Environment 0 - 50 °C
95 % Relative
Humidity
Battery Life/Type 250 Hrs./4x1.5 V
Dimensions 173 x 41 x 22 mm
AD101
Range -2.00 to 16.00 pH
Resolution 0.01 pH
Accuracy ± 0.02 pH
Temp.compensation Automatic
Environment 0 - 50 °C
95 % Relative
Humidity
Battery Life/Type 250 Hrs./4x1.5 V
Dimensions 173 x 41 x 22 mm
USER MANUAL
AD100 & AD101
pH Testers
• Microprocessor-based pH tester
• Automatic temperature compensation
• Splash-proof keypad
• Automatic shut-off
ACCESSORIES
AD70004P pH 4.01 buffer solution
20 ml sachet (25 pcs.)
AD70007P pH 7.01 buffer solution
20 ml sachet (25 pcs.)
AD70010P pH 10.01 buffer solution
20 ml sachet (25 pcs.)
Dear Customer,
Thank you for choosing an ADWA product.
Please read carefully this manual before
starting operations.
For additional technical information, please
e-mail us at:
sales@adwainstruments.com
ISTRAD100 09/14
www.adwainstruments.com
CONDITIONING
Remove the cap. If white crystals have
formed, they will be dissolved during
conditioning.
To condition, soak the tip of the tester in
pH 7.01 buffer solution for ten minutes.
CALIBRATION
Calibrate your tester once a week or at
any time you suspect a problem with the
readings. ADWA pH testers can be
calibrated at 4, 7 and 10 pH values.
ALWAYS CALIBRATE AT pH 7 FIRST.
1. Put the tip of the tester in pH 7.01 buffer
solution and press the ON/OFF button.
2. Press CAL button: “7.0” and “pH” will
start flashing. When the sign “pH” stops
flashing, the reading has stabilized. Then
press READ button: “4.0” and “pH” will
start flashing.
3. Rinse the tip of the tester with deionized
water.
4. Put the tip of the tester in pH 4.01 buffer
(for acidic measurements) or in pH 10.01
buffer (for alkaline measurements): “4.0”
(or “10.0”) and “pH” will start flashing.
5. When the sign “pH” stops flashing, the
reading has stabilized. Press READ. The
calibration is completed.
ALWAYS USE A FRESH BUFFER
SOLUTION FOR CALIBRATION.
OPERATION
1. Remove the protective cap from the
bottom of the tester.
2. Press ON/OFF button to turn the tester
on.
3. Place the tip of the tester into the sample
to be measured.
4. Stir the sample and record the reading
when the value has stabilized. The tester
will automatically compensate temperature
variations.
5. Press ON/OFF button to turn the tester
off.
MAINTENANCE
The sensor should be kept moist at all times.
This can be done by storing the tester with
a few drops of pH 7.01 buffer solution in
the protective cap. Rinse the electrode after
each measurement with tap water.
WARNING: DO NOT USE DEIONIZED
OR DISTILLED WATER FOR STORAGE
PURPOSES.
BATTERY REPLACEMENT
When the batteries need to be replaced,
the “Eb” error message will appear on the
display and the tester will turn off automatically
to prevent the unreliable measurement result.
Open the battery compartment at the top
of the tester. Place the batteries noting the
polarity listed in the battery compartment.
CONDITIONING
Remove the cap. If white crystals have
formed, they will be dissolved during
conditioning.
To condition, soak the tip of the tester in
pH 7.01 buffer solution for ten minutes.
CALIBRATION
Calibrate your tester once a week or at
any time you suspect a problem with the
readings. ADWA pH testers can be
calibrated at 4, 7 and 10 pH values.
ALWAYS CALIBRATE AT pH 7 FIRST.
1. Put the tip of the tester in pH 7.01 buffer
solution and press the ON/OFF button.
2. Press CAL button: “7.0” and “pH” will
start flashing. When the sign “pH” stops
flashing, the reading has stabilized. Then
press READ button: “4.0” and “pH” will
start flashing.
3. Rinse the tip of the tester with deionized
water.
4. Put the tip of the tester in pH 4.01 buffer
(for acidic measurements) or in pH 10.01
buffer (for alkaline measurements): “4.0”
(or “10.0”) and “pH” will start flashing.
5. When the sign “pH” stops flashing, the
reading has stabilized. Press READ. The
calibration is completed.
ALWAYS USE A FRESH BUFFER
SOLUTION FOR CALIBRATION.
OPERATION
1. Remove the protective cap from the
bottom of the tester.
2. Press ON/OFF button to turn the tester
on.
3. Place the tip of the tester into the sample
to be measured.
4. Stir the sample and record the reading
when the value has stabilized. The tester
will automatically compensate temperature
variations.
5. Press ON/OFF button to turn the tester
off.
MAINTENANCE
The sensor should be kept moist at all times.
This can be done by storing the tester with
a few drops of pH 7.01 buffer solution in
the protective cap. Rinse the electrode after
each measurement with tap water.
WARNING: DO NOT USE DEIONIZED
OR DISTILLED WATER FOR STORAGE
PURPOSES.
BATTERY REPLACEMENT
When the batteries need to be replaced,
the “Eb” error message will appear on the
display and the tester will turn off automatically
to prevent the unreliable measurement result.
Open the battery compartment at the top
of the tester. Place the batteries noting the
polarity listed in the battery compartment.

Produktspecifikationer

Varumärke: Adwa
Kategori: Mätutrustning
Modell: AD101

Behöver du hjälp?

Om du behöver hjälp med Adwa AD101 ställ en fråga nedan och andra användare kommer att svara dig


Mätutrustning Adwa Manualer

Adwa

Adwa AD1030 Bruksanvisning

23 September 2024
Adwa

Adwa AD1040 Bruksanvisning

23 September 2024
Adwa

Adwa AD11 Bruksanvisning

23 September 2024
Adwa

Adwa AD33 Bruksanvisning

23 September 2024
Adwa

Adwa ECO406 Bruksanvisning

23 September 2024
Adwa

Adwa AD31 Bruksanvisning

23 September 2024
Adwa

Adwa AD110 Bruksanvisning

23 September 2024
Adwa

Adwa AD100 Bruksanvisning

23 September 2024
Adwa

Adwa AD310 Bruksanvisning

23 September 2024
Adwa

Adwa AD1000 Bruksanvisning

23 September 2024

Mätutrustning Manualer

Nyaste Mätutrustning Manualer

PCE Instruments

PCE Instruments PCE-PMI 1 Bruksanvisning

14 Januari 2025
PCE Instruments

PCE Instruments PCE-324 Bruksanvisning

14 Januari 2025
PCE Instruments

PCE Instruments PCE-TC 32N Bruksanvisning

14 Januari 2025
PCE Instruments

PCE Instruments PCE-ACO 9500 Bruksanvisning

14 Januari 2025
Klein Tools

Klein Tools CL810 Bruksanvisning

14 Januari 2025
Klein Tools

Klein Tools CL710 Bruksanvisning

14 Januari 2025
Ebro

Ebro PHT 830 Bruksanvisning

13 Januari 2025
Gossen Metrawatt

Gossen Metrawatt PROFiTEST H+E EASY CHECK Bruksanvisning

10 Januari 2025
PCE Instruments

PCE Instruments PCE-VT 3950S Bruksanvisning

9 Januari 2025
PCE Instruments

PCE Instruments PCE-VT 3750S Bruksanvisning

9 Januari 2025