Allen & Heath RPS11 Bruksanvisning

Läs nedan 📖 manual på svenska för Allen & Heath RPS11 (7 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
USER GUIDE
USER GUIDE
USER GUIDE
USER GUIDE USER GUIDE
Publication AP2725
RPS11
Rack Mount Power Supply
2
Warranty
LIMITED ONE YEAR WARRANTY
This product is warranted to be free from defects in materials or workmanship for a period of one year from the date of purchase
by the original owner.
To ensure the high level of performance and reliability for which this equipment has been designed and manufactured please read
the User Guide before use.
In the event of a failure notify and return the defective unit to ALLEN & HEATH or its authorised agent as soon as possible for
repair under warranty subject to the following conditions:
CONDITIONS OF WARRANTY:
1. The product has been installed and operated in accordance with the instructions in the User Guide.
2. The product has not been subject to misuse either intended or accidental, neglect, or alteration other than as described in the
User Guide or Service Manual, or approved by ALLEN & HEATH.
3. Any necessary adjustment, alteration, or repair has been carried out by ALLEN & HEATH or its authorised agent.
4. The defective unit is to be returned carriage prepaid to ALLEN & HEATH or its authorised agent with proof of purchase.
5. Units to be returned should be packed to avoid transit damage.
In certain territories the terms may vary. Check with your Allen & Heath agent for any additional warranty that may apply.
Allen & Heath Agent:
Allen & Heath Limited,
Kernick Industrial Estate,
Penryn,
Cornwall.
England.
TR10 9LU
Tel: 01326 372070
Fax: 01326 377097
copyright © 2005 Allen & Heath Limited. All rights reserved.
Publication AP2725 Issue 5
Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor.
ALLEN & HEATH shall not be liable for any loss or damage whatsoever arising from the use of information or any error
contained in this manual.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by means, electronic,
electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written
permission of ALLEN & HEATH.
It is recommended that all maintenance and service on the product should be carried out by ALLEN & HEATH or its authorised
agents. ALLEN & HEATH cannot accept any liability whatsoever for any loss or damage caused by service, maintenance or
repair by unauthorised personnel.
3
RPS11 Power Supply
INTRODUCING THE RPS11
The RPS11 is a linear power supply which, like other linear supplies, produces DC voltages by rectifying, smoothing and
regulating AC voltages from the secondary windings of a mains transformer.
Allen & Heath mixing consoles employ a number of DC voltage supply levels in their operation and these are provided at the
output of the power supply unit.
IMPORTANT: Please read this manual carefully before connecting your
RPS11 power supply to the mains.
IMPORTANT: Any changes or modifications to the equipment not approved by Allen & Heath could void the compliance of
the console and therefore the users authority to operate it.
Precautions and Safety instructions
General Precautions
Avoid storing or using the RPS11 in conditions of excessive heat or cold, or in positions where it is likely to be subjected to
vibration, dust or moisture. Do not use any liquids to clean the exterior of the unit: a soft, dry cloth or brush is ideal.
SOLVENTS MAY CAUSE DAMAGE TO PAINT OR PLASTIC PARTS
Handling and Transport
The RPS11 is supplied in a specially designed cardboard box. If it is necessary to move the unit any distance after installation, it
is recommended that this carton is used to protect it. Be sure to disconnect all cabling before moving. If the RPS11 is to be moved
regularly (e.g. touring) it is recommended that it is installed in a foam lined case. At all times avoid applying excessive force to
any switches or connectors.
This product complies with the European Electromagnetic Compatibility directives 89/336/EEC & 92/31/EEC
and the European Low Voltage directive 73/23/EEC & 93/68/EEC.
ON OFF
T 10A 250V 20mm
CAUTION: FOR CONTINUED PROTECTION AGAIN ST RISK OF FIRE
ATTENTION: REMPLACER LE FUSIBLE AVEC UN DES MEMES
REPLACE FUSE WITH SAME TYPE AND RATING.
DC FUSES
CARACTERISTIQ UES.
V+
V-
RPS11 ALLEN&HEATH
CONSOLE POWER SUPPLY
POWER

Produktspecifikationer

Varumärke: Allen & Heath
Kategori: Inte kategoriserad
Modell: RPS11

Behöver du hjälp?

Om du behöver hjälp med Allen & Heath RPS11 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Allen & Heath Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer