American International SBK931GB Bruksanvisning

Läs nedan 📖 manual på svenska för American International SBK931GB (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
iSBK931GB
VEHICLE APPLICATION
Subaru
2018 Crosstrek
2017-18 Impreza
www.aampglobal.com www.aius.net
2500 East Francis Street Ontario, CA 91761, U.S.A.
Sales: (800) 477-2267
Intl: (727) 572-9255
Support: 888-228-5560
©2018 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 6/18 PRINT Ver. 6/18
SBK931GB Mounting Kit
DASH DISASSEMBLY INSTRUCTIONS
1. Using a soft tool carefully unsnap and remove the air vents on both sides of the radio.
2. Unsnap and remove the trim bezel above the factory radio.
3. From the radio mounting brackets Remove (4) Phillips screws securing the radio, remove.
4. Remove (4) panel clips from the OEM radio panel. Save for kit assembly.
23
DOUBLE DIN INSTALLATION INSTRUCTIONS
Figure A
KIT ASSEMBLY INSTRUCTIONS
Single ISO Mount Application
1. Reinstall the (4) panel clips left over for disassembly to the rear of the
SBK931GB main panel.
2. Insert pocket into lower section of the brackets.
3. Install brackets to rear of main frame using the (2) screws provided, hooking bottom of
 bracketstomainpanelrst
4. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
5. Using the main frame of the as a guide, slide radio forward or backward for desired
look and then tighten screws to the radio.
Double DIN ISO Mount Application
See Fig B for bracket tab removal.
1. Reinstall the (4) panel clips left over for disassembly to the rear of the SBK931GB
main panel.
2. Remove pocket support tabs from both brackets.
3. Install brackets to rear of main frame using the (2) screws provided, hooking bottom of
 bracketstomainpanelrst
4. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
5. Using the main frame of the as a guide, slide radio forward or backward for desired
look and then tighten screws to the radio.
Figure B Remove shaded tabs
on left and right sides
of the brackets
(Right side not shown)

Produktspecifikationer

Varumärke: American International
Kategori: Inte kategoriserad
Modell: SBK931GB

Behöver du hjälp?

Om du behöver hjälp med American International SBK931GB ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad American International Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer