Antari X-30 MK3 Bruksanvisning
Antari
Effektmaskin
X-30 MK3
Läs nedan 📖 manual på svenska för Antari X-30 MK3 (12 sidor) i kategorin Effektmaskin. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/12
READ ANDSAVE THESEINSTURCTIONS
2009 AntariLighting&EffectsLtd.
X-30WIRELESSCONTROL MODULE
USERMANUAL
BEDIENUNGSANLEITUNG
UserManual
AntariX-30WirelessControlModule
Congratulationsonthepurchaseofyournew
A X-30ntari WirelessControlModule
UserManual 01
Thank you for choosing the Antari X-30. The transmitter and the
receiving unit serve for wireless control of Antari X-310, X-510, X-515, and X-530
fog machines. The system operates with the fixed UHF frequency 433.920 MHz. The
transmission range is approx. 50 m and depends on the local conditions.
The system is designed for indoor use only. Never
remove the serial barcode from the devices as this would make the guarantee void.
wireless control module
REV3
The transmitter
operates with a 12 V battery type 23A.
-Introduction
This product is in accordance with the R&TTE directive (Radio and Telecommunication
Technical Equipment) of the European Union and falls into equipment Class 1. In all EU
member countries, the operation of this wireless system is generally approved by the
national telecom regulatory authority. The system is license-free. In some countries
outside the EU, the operation of this wireless system may needs to be approved by the
national telecoms regulatory authority.
-Approval
Keep this device dry.
For indoor use only. Not designed for outdoor use.
Ideal operating temperature is between 0° and 40° Celsius.
No user serviceable parts inside. Refer to your Antari dealer or other authorized service
personnel.
For adult use only.
Never use aggressive cleansing agents or chemicals for cleaning.
If the remote control is not used for a longer period, please remove the battery. Dispose of
used batteries properly to save the environment.
Damage, caused by manual modifications on the device are not subject to warranty. If the
device is used for other purposes than originally intended, or if it is not correctly operated
or not repaired, the product may suffer damages and the guarantee becomes void.
-SafetyInstructions
X-30
This wireless module consists of a transmitter equipped with two buttons for fog on and off
and a receiving unit with a 2-meter line, a 5-pin XLR connector and an LCD panel
displaying all operation statuses of the fog machine. The interface allows the operator to
customize fog machine functions by adjusting the fogging duration, interval, and volume
as well as the heater and the DMX and RF address. There are six buttons on the control
board. All current operating parameters are automatically stored in non-volatile memory,
allowing the machine to be powered down without losing function settings.
Screw the supplied antenna to the receiving unit. Connect the receiving unit to the
corresponding input jack on your fog machine. The jack has a latching. To remove the plug,
press the lever. Fix the receiving unit to the fog machine with the fixation screws. After
switching on, the display shortly indicates the fog machine starts with
the warm-up process and the display indicates Warming Up . While the unit is warming
up, fog output will not be possible yet. Program the necessary menu settings with the
control panel of the receiving unit. Once the warm up process is completed, fog output will
be possible. The display indicates Ready to Fog .
»Antari X-30«. Then
» «
-
» «
Use the button FUNCTION to enter the menu. Press the button FUNCTION so many times
until the desired menu item is shown in the display. Then press the button ENTER
[VOLUME] to enter the menu item. Use the buttons UP and DOWN to adjust values.
Confirm your settings with the button ENTER [VOLUME] or exit the menu item with the
button ESC [TIMER]. Never wait for more than 5 seconds to press the next button,
otherwise the setting procedure will be stopped.
-Configuration of the buttons
-Receivingunit
TRANSMITTER RECEIVINGUNIT
Blue(on)
Red(off)
ControlLED
Clip
Antenna
LCDscreen
Connectioncable
Functionbuttons
Fixationscrews
1.
Volume
Timer
DMX
Heater
RF Addr.
Interval
Volume
Duration
2.UP andDOWN
3. TIMER/ESC
4.VOLUME/ENTER
5.MANUAL/ON/OFF
TIMER
VOLUME
MANUAL
FUNCTION
VOLUME
ESC ENTER ON / OFF
TIMER MANUAL
-SetupandOperation
UserManual 02
X-30
DIP switches
Produktspecifikationer
| Varumärke: | Antari |
| Kategori: | Effektmaskin |
| Modell: | X-30 MK3 |
Behöver du hjälp?
Om du behöver hjälp med Antari X-30 MK3 ställ en fråga nedan och andra användare kommer att svara dig
Effektmaskin Antari Manualer
25 September 2024
16 September 2024
4 September 2024
3 September 2024
1 September 2024
1 September 2024
28 Augusti 2024
27 Augusti 2024
27 Augusti 2024
25 Augusti 2024
Effektmaskin Manualer
- Effektmaskin Nedis
- Effektmaskin BeamZ
- Effektmaskin Velleman
- Effektmaskin American DJ
- Effektmaskin Viking
- Effektmaskin Adj
- Effektmaskin Behringer
- Effektmaskin Valcom
- Effektmaskin Midas
- Effektmaskin Elation
- Effektmaskin QTX
- Effektmaskin Konig
- Effektmaskin Valueline
- Effektmaskin Chauvet
- Effektmaskin Showtec
- Effektmaskin Eurolite
- Effektmaskin Monoprice
- Effektmaskin HQ Power
- Effektmaskin Stairville
- Effektmaskin Black Lion Audio
- Effektmaskin Laserworld
- Effektmaskin Martin
- Effektmaskin Drawmer
- Effektmaskin ColorKey
- Effektmaskin JB Systems
- Effektmaskin Blizzard
- Effektmaskin Hazebase
- Effektmaskin Cameo
- Effektmaskin DJPower
- Effektmaskin Doepfer
- Effektmaskin Fun Generation
- Effektmaskin Karma
- Effektmaskin Lexicon
- Effektmaskin Futurelight
- Effektmaskin The Confetti Maker
- Effektmaskin Eliminator Lighting
- Effektmaskin Klark Teknik
- Effektmaskin Lab Gruppen
- Effektmaskin TCM FX
- Effektmaskin Magmatic
- Effektmaskin Technical Pro
- Effektmaskin Rosco
- Effektmaskin Showven
Nyaste Effektmaskin Manualer
18 Oktober 2024
10 Oktober 2024
8 Oktober 2024
6 Oktober 2024
3 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
30 September 2024
29 September 2024