Apc C2 Bruksanvisning

Läs nedan 📖 manual på svenska för Apc C2 (20 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/20
User Manual
C Type Wall Mount Power Filter
Model: C2/C2-CN
Entire contents copyright 2006 American Power Conversion Corporation. All rights
reserved. Reproduction in whole or in part without permission is prohibited. APC, the
APC logo, and TRADE MARK NAMES are trademarks of American Power Conversion
Corporation.
All other trademarks, product names, and corporate names are the property of their
respective owners and are used for informational purposes only.
This manual is subject to change without notice.
i
Safety Information
1.
Read this manual
- Read all of the safety and operating instructions
before installing and operating this device.
2.
Keep this manual
- Retain this manual, and all of the safety
information that came with this device.
3.
Warnings
- Comply with all warnings presented in this manual, as well
as any found on the device.
4.
Follow Instructions
- Follow all operating and use instruction.
5.
Cleaning
- Unplug this device from the wall outlet before cleaning. Do
not use liquid or aerosol cleaners. Use a soft damp cloth for cleaning.
Note
:
A product that is meant for uninterrupted service and for some
specific reason, such as the possibility of the loss of an authorization code
for a cable TV converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference to unplugging
this device.
6.
Water and Moisture
- Do not use this product near any source of water,
or in an environment where the relative humidity may exceed 95% (non-
condensing).
7.
Placement
- Do not install this device on any unsteady surface. Do not
install this device on any heat source.
8.
Power
- Ensure this device is connected to a properly grounded AC
power source. Further ensure the device is plugged into a source
providing the required 120 Vac. Do not use a plug adapter which defeats
the ground pin of the AC plug.
9.
Polarization
- This device has a polarized AC line plug having one
blade wider than the other. This plug will only fit into the wall outlet in
one orientation. This is a safety feature. Do not remove the round
grounding pin, or use an adapter that defeats this safety feature.
10.
Power Cord
- Ensure power cords are routed in a manner that will
preclude them being pinched, frayed, or stepped on. After connecting
other devices to this device, do not push the rear of the device up against
any surface (wall or shelving unit), as this may create an undesired bend
in the power cords which may break the wire strands of the cord.
11.
Antenna Grounding
- Although this device provides protection
against electrical surges, when connecting an outside antenna or cable
system to devices connected to this device, ensure the antenna or cable
system is grounded so as to provide additional protection against voltage
surges and static charges in accordance with Section 810 of the National
Electric Code, ANSI/NFPA No.70 (see illustration - next page).
12. Lightning - This device employs Metal Oxide Varisters (MOVs),
and other circuitry to protect against lightning and other sources of
voltage surges and sags. It is not necessary to turn this device or the
devices connected to this device, off during a lighting storm.

Produktspecifikationer

Varumärke: Apc
Kategori: Inte kategoriserad
Modell: C2

Behöver du hjälp?

Om du behöver hjälp med Apc C2 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Apc Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer