Ariston AQXXF 129 Bruksanvisning

Ariston tvättmaskin AQXXF 129

Läs nedan 📖 manual på svenska för Ariston AQXXF 129 (60 sidor) i kategorin tvättmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/60
GB
1
WASHING MACHINE
English,1
GB
AQXXF 129 H
Instruction booklet
Contents
Installation, 2-3
Unpacking and levelling
Connecting the cold water and electricity supplies
Technical data
Description of the machine, 4-5
Control panel
Running a wash cycle, 6
Programmes and options, 7
Table of Programmes
Wash options
Detergents and laundry, 8
Detergent
Preparing the laundry
Washing advice
Load-balancing system
Precautions and tips, 9
General safety
Disposal
Opening the door manually
Care and maintenance, 10
Turning off the water and electricity supplies
Cleaning the machine
Cleaning the detergent dispenser
Drum maintenance
Cleaning the pump
Checking the water inlet hose
Troubleshooting, 11
Assistance, 12
F
Français,13
ES
Espanol,25
PT
Português,37
NL
Nederlands,49
GB
2
Installation
A
Keep this instruction manual in a safe place for
future reference. If the appliance is sold, given away
or moved, please ensure the manual remains with the
machine so that the new owner may benefit from the
advice contained within it.
Please read this instruction manual carefully it
contains important information regarding the safe
installation, use and maintenance of the appliance.
You will find the guarantee and other details relating to
the installation process in the bag containing this booklet.
Unpacking and levelling
Unpacking
1. Once the washing machine has been removed
from the packaging, check that it has not been
damaged during transportation.
If it has been damaged, contact the retailer and do
not proceed any further with the installation process.
2. Remove the 4 transit
bolts used during
transportation and the
corresponding spacers
on the back of the
machine (see figure).
3. Having removed the 4 bolts use the 4 plastic
blanking plates to cover the 4 holes.
4. Keep all the pieces; if the washing machine is
transported in future, the transit bolts and spacers will
have to be replaced in order to avoid damaging the
inside of the machine.
Unlocking the chest
To remove the bracket that locks the chest in place and
supports the tub during transportation, remove the
"central" screws, then hold it firmly as you push it
backwards and take it out; loosen the 4 "side" screws
and remove the metal strip.
After you have completed this process fit the plastic toe-
kick supplied (in the "chest"), making sure that the
hooks have been positioned in the holes provided before
pushing it towards the machine.
For more detailed information please refer to the
guidelines provided inside the "chest".
Packaging materials should not be used as toys by
children.
Levelling
1. Position the washing machine on a level and sturdy
floor, without resting it against walls or cabinets.
2. If the floor is uneven,
the feet of the appliance
may be adjusted until it
reaches a perfectly
horizontal position (the
angle of inclination must
not exceed 2 degrees).
If the appliance is levelled correctly it will be more
stable and much less likely to cause vibrations and
noise during the spin cycle.
If positioned on a fitted carpet or a rug, adjust the
feet in such a way as to allow room for air to circulate
and provide ventilation beneath the washing machine.
Connecting the cold water and
electricity supplies
Connecting the water inlet hose
Before connecting the inlet hose to the cold water supply,
allow the water to flow from the tap until it runs clear.
1. Connect the inlet hose
to the machine, by
screwing it into the cold
water inlet on the upper
right hand side of the
back of the machine (see
figure).
2. Place the seal A
(provided in the bag) on
the end of the inlet hose
and screw it to a cold
water tap with a 3/4 BSP
threaded connection (see
figure).
3. Make sure there are no kinks or bends in the inlet hose.
The water pressure at the tap must fall within the values
indicated in the Technical data table (see next page).
GB
3
Technical data
Model AQXXF 129 H
Dimensions
width 59.5 cm
height 105 cm
depth 64.5 cm
Capacity from 1 to 7.5 kg
Electrical
connections
voltage 220-240 V 50 Hz
maximum absorbed power 2100 W
Water connections
maximum pressure 1 MPa (10 bar)
minimum pressure 0.05 MPa (0.5 bar)
drum capacity 62 litres
Spin speed up to 1200 rotations per minute
Energy rated
programmes
according to
regulation IEC456
WHITE COTTON programme;
temperature 60°C;
using a load of 7.5 kg.
This appliance conforms to the
following EC Directives:
- 72/23/EEC dated 19/02/73 (Low
Voltage) and subsequent modifications
- 89/336/EEC dated 03/05/89
(Electromagnetic Compatibility) and
subsequent modifications
- 2002/96/EC
65 - 100 cm
If the water inlet hose is not long enough, contact a
specialist store or an authorised technician.
Always use the new water inlet hoses supplied with
the machine.
Drainage Connection
Connect the outlet hose
to a draining duct or a
stand pipe at a height
between 65 and 100 cm
from the floor. Do not
bend it under any
circumstances.
Alternatively, place the
end of the hose over the
edge of a washbasin or
tub, fastening the hose
supplied to the tap (see
figure).
The free end of the hose
should not remain
immersed in water.
We advise against the use of hose extensions; if
absolutely necessary, the length of the extension
must not exceed 150 cm and its diameter must be
the same as the original hose.
Electrical connection
Before inserting the plug into the electrical socket,
make sure that:
the socket is earthed and complies with current
regulations;
the socket can withstand the maximum load of the
appliance, which is indicated in the Technical data
table (see opposite);
the power supply voltage falls within the values
indicated in the Technical data table (see opposite);
the socket is compatible with the plug of the
appliance. If this is not the case, either the socket
or the plug must be replaced.
The machine must not be installed outdoors, even in
covered areas. It is extremely dangerous to leave the
appliance exposed to rain, storms and other weather
conditions.
Once the machine has been installed, the electricity
socket should be easily accessible.
Do not use extension cables or multiple sockets.
The cable should not be bent or compressed.
The cable should be replaced only by authorised
technicians.
Warning! The company shall not be held responsible
for any incidents that occur if these regulations are
not observed.

Produktspecifikationer

Varumärke: Ariston
Kategori: tvättmaskin
Modell: AQXXF 129

Behöver du hjälp?

Om du behöver hjälp med Ariston AQXXF 129 ställ en fråga nedan och andra användare kommer att svara dig


tvättmaskin Ariston Manualer

Ariston

Ariston AIB14 Bruksanvisning

10 Januari 2025
Ariston

Ariston AQXXF 129 Bruksanvisning

10 Januari 2025
Ariston

Ariston AV61 Bruksanvisning

10 Januari 2025
Ariston

Ariston ALD10 Bruksanvisning

10 Januari 2025
Ariston

Ariston AMD145 Bruksanvisning

10 Januari 2025
Ariston

Ariston AD12 Bruksanvisning

24 Juli 2024
Ariston

Ariston AVL88 Bruksanvisning

23 Juli 2024
Ariston

Ariston AVSG12 Bruksanvisning

21 Juli 2024
Ariston

Ariston AQXXL100H Bruksanvisning

21 Juli 2024
Ariston

Ariston A1400WD Bruksanvisning

20 Juli 2024

tvättmaskin Manualer

Nyaste tvättmaskin Manualer

Candy

Candy go 108 Bruksanvisning

10 Januari 2025
Daewoo

Daewoo DWC-LD161X Bruksanvisning

10 Januari 2025
Bauknecht

Bauknecht WAT PLATINUM 782 Bruksanvisning

10 Januari 2025
Indesit

Indesit sisl 126 eu moon Bruksanvisning

10 Januari 2025
Indesit

Indesit widxl 106 Bruksanvisning

10 Januari 2025
Bauknecht

Bauknecht Wate Synphony2 Dynamic Sense Bruksanvisning

10 Januari 2025
AEG Electrolux

AEG Electrolux lavamat 76850 a Bruksanvisning

10 Januari 2025
Samsung

Samsung J1453 Bruksanvisning

10 Januari 2025
Panasonic

Panasonic na 16vg1 wgn Bruksanvisning

10 Januari 2025
Dyson

Dyson CR02 Bruksanvisning

10 Januari 2025