Artusi CACC32KX Bruksanvisning

Artusi Ugn CACC32KX

Läs nedan 📖 manual på svenska för Artusi CACC32KX (2 sidor) i kategorin Ugn. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Model Power Supply Power(W) Size (mm)

Buit-in Hole Size

(mm)

AC 220-240V

50-60Hz 1800W

(180mm)

1200W

(145mm)

Good Bad

(recessed base) (convex base) (undersize) (oversize)

Bad Bad Bad Bad Bad

(moisture on hotplate) (no pan)

Technical Data

CACC32K

Please read the instruction manual carefully before operating your new hob.

Dear Owner: Thank you for purchasing our cooktop designed to give you many years of cooking

pleasure. Before using your new appliance please read the user manual carefully and keep it in a safe

place for future reference.

THIS APPLIANCE MUST ONLY BE INSTALLED BY A QUALIFIED PERSON USING THE

INSTRUCTIONS PROVIDED. THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR

IMPROPER INSTALLATION THAT MAY HARM PERSONS AND ANIMALS OR CAUSE DAMAGE

TO PROPERTY. THE APPLIANCE MUST ONLY BE USED FOR THE PURPOSE FOR WHICH IT

WAS DESIGNED. ANY OTHER USE (e.g. HEATING ROOMS) IS CONSIDERED TO BE IMPROPER

AND MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE RESULTING FROM

IMPROPER AND/ OR IRRESPONSIBLE USE.

Utensils

Use pans with flat bottoms. Uneven or thin bottoms will waste energy and cooking times will be slow.

Use pans slightly larger than the cooking zones. Smaller pans will waste energy.

Do not use oversized pans. More than 50mm oversize can overheat cooktop components and can cause

fine cracks in the enamel hob that will trap dirt.

Use only dry utensils. Do not place wet or steamy parts (eg. lids) on the hotplates.

Do not use pots and pans that are unsteady and likely to rock or overbalance.

Do not operate the cooktop without pots or pans on the cooking zones.

Do not use enamel pots .

IMPORTANT NOTICE

Please register your warranty card. Return the enclosed warranty card dated and signed. The Manufacturer

shall not be held responsible for any inaccuracies in this handbook due to printing or transcription errors. The

designs in the images and figures are purely indicative. The Manufacturer reserves the right to make any

modifications to the products as may be considered necessary or useful or in the interests of the user, without

jeopardizing the main functional and safety features of the product.

WARNING: Unattended cooking using fat or oil can be dangerous

and may result in a fire. In the event of a fire: Switch off the appliance

and then cover the flame with a lid or a fire blanket. NEVER try to

extinguish a fire with water.

CAUTION: Never leave any cooking food unattended. Spills,

overflows, burnt food and/or fire may result.

Danger of fire: Do not store items on the cooking surfaces.

SAFETY WARNING

1.Inspect the built-in ceramic hob carefully after opening the package. When there are any problems

please refer to the supplier.

2.Dispose of packaging materials (plastic bag, foam, nails, carton) carefully. Avoid a place where

children can easily access. Please dispose of packaging in an environmentally friendly manner.

3.Never attempt to change the wiring under any circumstances.

4.Dispose of the appliance in an environmentally friendly manner.

5.Replace damaged power cords by the manufacturer, its service agent or similarly qualified persons in

order to avoid a hazard.

6.The appliance is not to be used by persons (including children) with reduced physical, sensory or

mental capabilities, or a lack of experience and knowledge. All such users must be given instruction

and kept under supervision. Always supervise children and never allow them to play with the appliance.

7.Never stare at the hob elements when the appliance is working. It may damage your eyes.

8.Avoid burns: young children should be kept away as accessible parts become hot during use

9.WARNING: If the hob surface is cracked, switch off the appliance to avoid the possibility of electric

shock as hob glass-ceramic protect users from live electric parts.

10.Never use a steam cleaner on the hob.

11.Do not place metallic objects such as knives, forks, spoons and lids on the hob surface since they

can get hot.

12.CAUTION: The surface temperature exceeds 95°C. To avoid a hazard under bench access must be

restricted. Refer to the installation instructions.

13.WARNING: The appliance and its accessible parts become hot during use. Care should be taken to

avoid touching heating elements.

14.Do not operate the appliance with an external timer or separate remote-control system.

15.WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or

indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards

incorporated in the appliance. The use of inappropriate guards can cause accidents.

16.Do not touch the built-in ceramic hob with wet hands or while standing in water with bare feet.

17.Do not operate the built-in electric hob when you are bare footed.

18.Always disconnect the power supply before you do any maintenance and cleaning.

When the built-in ceramic hob is working, the temperature of the electric hob and the ambient tempera-

tures become higher, so do not touch it and keep children away.

19.The built-in ceramic hob must be built into a heat resistant cabinet.

20.NOTE: Some smoke may occur when the hob is first used. Leave the hob on for a short period to

burn off excess sealants etc. used in the manufacturing process.

304X524X90 280(L)X496(W)

Operation of the top with the heating area

An appropriately selected pan saves energy. A pan should have a thick, flat base with a diameter equal

to the plate diameter as in that case heat is transferred most efficiently.

Advice on the use of cooking tops. To save energy and to have a longer life of the ceramic tops, we

advise using pans with flat bottom and with a diameter not less than the diameter of the tops. Care must

be taken that fluids do not spill on the ceramic plates. Never leave the tops on without pans on them or

with empty pans, and never use the tops to heat the plates. Switch on the plates after having set the

pans on them. Once switched off, the plates remain warm for a while, do not touch. Switch off the

heating element before removing the pans.

Use

Directions and suggestions for using

1.Do not touch the built-in ceramic hob with wet hands or feet.

2.Do not operate the built-in ceramic hob when you are bare footed.

3.Do not let young children operate the built-in ceramic hob.

4.Please disconnect the power supply before you do any maintenance and cleaning.

5.When the built-in ceramic hob is working, the temperature of the electric hob and the ambience become

higher, so please do not touch it and keep the children away from it.

6.A steam cleaner must not be used for cleaning the appliance.

7.The appliance is not intended to be operated by means of an external timer or separate remote-control

system.

8.The built-in ceramic hob must be built into a heat resistant cabinet. Some smoking may occur when first

used. Leave on for a short period to burn off excess sealant.

according to your needs, the tops can be adjusted by turning the knobs either clockwise or

anti-clockwise on 9 position besides the 0 position (off). The positions marked by the higher numerical

index match the maximum output of heat (see table).

1-2

3-4

5-6

7-8

Switch off

MIN.Warming up

Stewing vegetables,slow cooking

Slow frying

Grilling meat,fish

MAX.Fast heating up ,fast cooking,frying

Switch Knob

Power indicator

Cooking zone 1800W

Cooking zone 1200W

Glass panel high temperature indicator

353 4

Cod:0070304812-CV20231216

Scraper for cleaning the hob

Symbol

Product Information Value Unit

Model Identification

Type of

Number of cooking zones

Heating Technology (cooking

areas, radiant cooking zones,

solid plates)

Diameter of useful surface area

per electric heated cooking zone

(rounded to the nearest 5mm)

Energy consumption cooking

zone area calculated per kg

Energy consumption calculated

per kg

Hob

Built-in ceramic hob

Wh/kg

Radiant cooking zones

189

Big ring: 182

Small ring: 195

Big ring: 180mm

Small ring: 145mm

CACC32K

WARNING

Close the cable clamp after making the electrical connection.

Close the terminal board cover by twisting it down.

Cleaning

Turn off the main power to the hob before carrying out any maintenance and wait for it to cool down.

Use lukewarm water and detergents to clean enameled elements. Never use abrasive products. Clean

tough stains using non-abrasive detergents or warm vinegar.

Use sponges or a damp cloth to clean the hob. Remove cleaning liquid from the glass worktop with a damp

cloth and dry using a soft cloth. Note: excess water can damage the electric elements.

Clean the electric tops using a damp cloth, then lightly oil the top when it is still warm.

Only licensed repairers should service and repair the appliance

Installation

Electrical connection

Appliances with three-pole cable are set up for operation with alternating current at the voltage and

frequency indicated on the rating plate. Look at the connection wiring diagram. The earth conductor is

yellow/green.

The connection to the electricity supply must be made by a qualified person and following the regulations.

When the appliance is to be installed above a built-in oven, the two appliances must be connected separate-

ly to make it easier to take the appliances out and for electrical safety.

The supply cable must be so positioned that no point can reach a temperature 50° C higher than ambient

temperature. Check that the supply system has an effective earth connection and meets the standards and

that the breaker can be reached easily when the appliance is installed.

When a cable is damaged or must be replaced, the operation must be carried out the by a service agent or

a suitably qualified professional.

When the appliance is being connected directly to the mains, an omnipolar circuit breaker must be installed

with a minimum opening of 3mm between contacts.

The installer must ensure that the correct electrical connection has been made and that it is compliant with

all applicable standards and safety regulations.

The cable must not be bent or compressed.

The cable must be checked regularly and replaced by authorised technicians only.

TERMINAL BOARD

TECHNICAL INFORMATION FOR INSTALLATION PERSONNEL

This appliance must be installed only by authorised personnel and in accordance with the regulations of

electricity authorities. The wall and bench surfaces must be capable of sustaining temperatures of 95

degrees Celsius. All laminates, fixing adhesive and surfacing materials should be certified suitable for this

temperature. Do not install it in areas with combustible materials.

According to the pictures, cut the hole in bench and place the built-in electric hob in it.

Your hob can be fitted to any worktop with a thickness of 40 to 50 mm.

Unit:mm

Inserting and fixing the hob

Before inserting the hob into the work surface, place the adhesive seal “s” around the underside edge of the

hob. It is important to fix this gasket evenly without gaps or overlap to prevent liquids from seeping underneath

the hob.

1.Place the gasket around the bottom edge of the hobs as shown in the illustration overleaf.

2.Place the hob in the installation opening and push it down so that the hob is resting frimly on the cabinet.

3.Secure the hob in position using the fixing brackets supplied.

Fitting guidelines

Secure the hob to the underside of the worktop using the fixings provided.

Screw one end of the bracket into the pre-drilled holes in the underside of the hob. The other end of the bracket should be located

underneath the worktop to secure the hob in position

Note 1:

Fire resistant material (e.g. ceramic tiles) are required to 450mm above burner top if wall or vertical structures are not permitted

within 200mm from burner.

Note 2:

No overhanging surface or rangehood / exhaust system are permitted within 600mm above cooktop.

Note 3:

Leave at least 50mm clearance between the base of the appliance and a combustible surface. Never leave the packing

components (plastic bags, nails, foamed polystyrene, etc.) within the reach of the children since they are a source of potential

danger.

The hob has a special seal which prevents liquid from entering the cabinet. Follow these instructions in order to correctly apply it.

Seal:

Detach the seal/s from their backing, ensure that the transparent protection still adheres to the seal itself. Turn over the hob and

correctly position seal under the edge of the hob, so that the outer part of the seal perfectly matches the outer edge of the hob.

Press the seal firmly in place to fix the seal to the hob.

By ensuring that this appliance is disposed of correctly, you will help prevent any possible harm to

The environment and to human health which might otherwise be caused if disposed of in the

wrong way.

The symbol on the product indicates that it may not be treated as normal household waste.

It should be taken to a collection point for the recycling of electrical and electronic goods.

For further information regarding the treatment, recovery and recycling of this product, please contact

your local council, household waste disposal service or the shop where you purchased the product.

CLEANING AND MAINTENANCE

- Do not use cleaning products containing abrasive materials for the cleaning and maintenance of the glass.

e.g. scouring powders containing an abrasive, abrasive compounds, abrasive stones, pumice stones, wire

brushes and so on. They may scratch the hob surface, causing irreversible damage.

- Large spillages that are firmly burnt onto the hob can be removed using a special scraper; be careful not

to damage the ceramic hob surface when doing this.

Caution! The scraper sharp blade should always be protected by adjusting the cover (just push it with your

thumb). Injuries are possible so be careful when using this instrument, keep it out of reach of children.

Appropriate light cleaning products are recommended e.g. any kind of liquid detergents. Alternatively a

solution of warm water with a little dishwashing liquid or cleaning products for stainless steel sinks can be

used.

PROBLEM

Hob doesn't work

SOLUTION

•Check the power connection

•Check the safety cutoff switch is OFF

•Check the fuse and the mains current limit

There is some smoke when

the hob is working

•It is normal the first time use.

•Clean around the electric hob and the

cooking zones

The wire/s are damaged •Contact the nearest maintainance

centre for service/ repair.

MALFUNCTION ELIMINATION

CONNECTION DIAGRAM

Caution! Voltage of heating

elements 220-240V Caution! In the event

of any connection the safety Wire

must be connected to the E terminal.

Recommended type of

connection lead

Brackets

Screw

Worktop

Screw

bracket

Hob

200 200

Rear wall

Front edge of worktop

Wood block

Recommended

installation

600-750

450

524

280

496

304

Produktspecifikationer

Varumärke:	Artusi
Kategori:	Ugn
Modell:	CACC32KX

Behöver du hjälp?

Om du behöver hjälp med Artusi CACC32KX ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Ugn Artusi Manualer

Artusi AFIR935B Bruksanvisning

24 September 2024

Artusi CAO611 Bruksanvisning

24 September 2024

Artusi ACS45MB Bruksanvisning

22 September 2024

Artusi AFG913X/1 Bruksanvisning

22 September 2024

Artusi AFG915X/1 Bruksanvisning

22 September 2024

Artusi AFG999X Bruksanvisning

21 September 2024

Artusi AFG999W Bruksanvisning

21 September 2024

Artusi CAGH7000B Bruksanvisning

20 September 2024

Artusi AFG999B Bruksanvisning

20 September 2024

Artusi CAID905KX Bruksanvisning

20 September 2024

Ugn Manualer

Nyaste Ugn Manualer

Taurus HM778WHD Bruksanvisning

27 Oktober 2024

Lacanche CITEAUX Bruksanvisning

27 Oktober 2024

JennAir JDS1450FS Bruksanvisning

27 Oktober 2024

Orima ORP-76-IN Bruksanvisning

27 Oktober 2024

Breville the Handy Hot Plate BHP150 Bruksanvisning

27 Oktober 2024

JennAir JGRP436HL Bruksanvisning

27 Oktober 2024

Neff C17MS22G1 Bruksanvisning

27 Oktober 2024

Pit Boss BK24 Bruksanvisning

27 Oktober 2024

Guzzanti GZ-8206 Bruksanvisning

27 Oktober 2024

Avanti DE2402SC Bruksanvisning

27 Oktober 2024