Asus PE3000G Bruksanvisning

Asus Inte kategoriserad PE3000G

Läs nedan 📖 manual på svenska för Asus PE3000G (66 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/66

PE3000G Series

Embedded Computer

User Manual

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by

any means, except documentation kept by the purchaser for backup purposes, without the express

written permission of ASUSTeK COMPUTER INC. (“ASUS”).

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,

OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS,

LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR

PRODUCT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to

the owners’ benet, without intent to infringe.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND

SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR

LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE

PRODUCTS AND SOFTWARE DESCRIBED IN IT.

LIMITATION OF LIABILITY

Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to

recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled

to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including

death) and damage to real property and tangible personal property; or any other actual and direct

damages resulted from omission or failure of performing legal duties under this Warranty Statement,

up to the listed contract price of each product.

ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort

or infringement under this Warranty Statement.

This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its

suppliers, and your reseller are collectively responsible.

UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY

CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3)

SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES

(INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS

INFORMED OF THEIR POSSIBILITY.

SERVICE AND SUPPORT

Visit our multi-language website at https://www.asus.com/support/

First Edition

January 2024

E21876

Contents

About this manual 5 ..................................................................................................................

Conventions used in this manual 6 ................................................................................................

Typography 6 .........................................................................................................................................

Package contents 7 ...................................................................................................................

Chapter 1: Getting to know your Embedded Computer

1.1 Features ........................................................................................................................ 10

1.1.1 Front view 10 ...........................................................................................................................

1.1.2 Rear view 14 .............................................................................................................................

1.1.3 Right view 18 ...........................................................................................................................

1.1.4 Left view 19 ..............................................................................................................................

Chapter 2: Using your Embedded Computer

2.1 Getting started 22 ...........................................................................................................

2.1.1 Connecting a power adapter to your Embedded Computer 22 ...........................

2.1.2 Connect a power supply to your Embedded Computer.................................... 24

2.1.3 Connect a display panel to your Embedded Computer 27 ....................................

2.1.4 Connect the USB cable from keyboard or mouse 29 ................................................

2.2 Installing antennas (optional) 30 ...............................................................................

2.3 Installing the desk mount 32 ......................................................................................

2.4 Installing the wall mount 33 .......................................................................................

2.5 Turning your Embedded Computer o............................................................. 34

2.6 Putting your Embedded Computer to sleep 34 ...................................................

Chapter 3: Upgrading your Embedded Computer

3.1 Installing a storage device 37 .....................................................................................

3.2 Removing the top heatsink 38 ...................................................................................

3.3 Replacing the top heatsink 40 ....................................................................................

3.4 Installing an MXM GPU module 41 ...........................................................................

3.5 Removing the heat spreader 43 ................................................................................

3.6 Installing an M.2 M-key module 45 ..........................................................................

3.7 Installing an M.2 E-key module 46 ............................................................................

3.8 Installing an M.2 B-key module 48 ............................................................................

3.9 Installing an mPCIe / mSATA module................................................................. 52

3.10 Installing a nano SIM card 56 ......................................................................................

3.11 Installing memory modules 57 ..................................................................................

Appendix

Safety information 60 ...............................................................................................................

Setting up your system 60 ................................................................................................................

Care during use 61 ...............................................................................................................................

Regulatory notices 62 ..............................................................................................................

Service and Support 66 ...........................................................................................................

About this manual

This manual provides information about the hardware and software features

of your Embedded Computer, organized through the following chapters:

Chapter 1: Getting to know your Embedded Computer

This chapter details the hardware components of your Embedded

Computer.

Chapter 2: Using your Embedded Computer

This chapter provides you with information on using your Embedded

Computer.

Chapter 3: Upgrading your Embedded Computer

This chapter provides you with information on how to upgrade the

memory modules, wireless modules, and hard disk drive / solid state

drive of your Embedded Computer.

Appendix

This section includes notices and safety statements for your Embedded

Computer.

Conventions used in this manual

To highlight key information in this manual, some text are presented as

follows:

IMPORTANT! This message contains vital information that must be

followed to complete a task.

NOTE: This message contains additional information and tips that can

help complete tasks.

WARNING! This message contains important information that must be

followed to keep you safe while performing certain tasks and prevent

damage to your Embedded Computer's data and components.

Typography

Bold text Indicates a menu or an item to select.

Italic Indicates sections that you can refer to in this manual.

Optional items*

Power cable DIO terminal block

Power supply Open-wire power cord

NOTE:

• *These accessories may not be bundled and may need to be

purchased separately.

• Some bundled accessories may vary depending on model. For

details on these accessories, refer to their respective user manuals.

• The device illustration is for reference only. Actual product

specications may vary depending on model.

• If the device or its components fail or malfunction during normal

and proper use within the warranty period, bring the warranty

card to the ASUS Service Center for replacement of the defective

components.

Getting to know your

Embedded Computer

1.1 Features

1.1.1 Front view

USB 2.0 port with cable lock

The USB (Universal Serial Bus) port is compatible with

USB 2.0 or USB 1.1 devices, such as keyboards, pointing

devices, ash disk drives, external HDDs, speakers,

cameras, and printers.

NOTE: The cable lock helps to prevent disconnection

caused by tension or vibration.

Isolated DIO connector

The Isolated Digital Input/Output (DIO) connector

provides electrical isolation of digital input and output

signals, which allow micro controllers to detect and

output logic states. The high voltage protection can be

used in industrial level uses.

Signal Specications

DO Output voltage range 0~48 VDC

Rated output current 4 A

Voltage for logic “0” 0~3 VDC

Voltage for logic “1” 10~48 VDC

Rated input current ±50 mA

Serial (COM/CAN) connector (optional)

The 9-pin COM/CAN Bus serial connector allows you

to connect devices with a COM/CAN interface, such

as an electronic control unit (ECU). Please refer to the

table below for the pin denitions of the COM/CAN Bus

connector.

CAN Bus

1 NA

2 CAN_L

3 GND

4 NA

5 GND

6 NA

7 CAN_H

8 NA

9 NA

System Reset pinhole

The hard reset pinhole allows you to reboot your

Embedded Computer

External Fan connector with cable lock (reserved)

The external fan connector allows you to connect an

external fan for your Embedded Computer.

NOTE: An external fan option is currently not

available for standard models. If you have a

requirement for this option, please contact your sales

representative.

WARNING! An external fan must be installed with a

fan guard to prevent accidental contact with moving

parts.

1.1.2 Rear view

Antenna jack

The antenna jack allows you to connect a wireless

antenna. Refer to the section for more Installing antennas

information on installing the antennas.

NOTE: SMA cables, antennas, and wireless modules

are purchased separately.

Functional Earth Ground

The functional earth ground provides you with a

grounding point.

Dual-mode DisplayPort

The DisplayPort 1.2 port can support resolutions up to

4096 x 2304 @ 60 Hz on external display devices.

HDMI™ 1.4 port with cable lock

The integrated HDMI (High Denition Multimedia

Interface) port with a receptacle connector can support

resolutions up to 4096 x 2304 @ 30 Hz on external display

devices.

NOTE: The cable lock helps to prevent disconnection

caused by tension or vibration.

DisplayPort

The DisplayPort allows you to connect your Embedded

Computer to an external display.

NOTE:

• This port is only functional when supported by

an optional MXM GPU module.

• When using only this port as a display output

source, this port will support a resolution of up to

4K @ 60 Hz. The resolution may also be aected

by the cabling and output device.

Serial (COM) connector

The 9-pin DB9 connector allows you to connect RS-

232/422/485 serial (COM) devices, such as bar code

scanners, modems, and printers. Please refer to the

table below for the pin denitions of the dierent COM

connectors.

NOTE: Default set to RS-232. Setting can be changed

through the BIOS.

Pin RS-232 RS-422 RS-485

1DCD# TX- D-

2RXD TX+ D+

3TXD RX+ NA

4DTR RX- NA

5GND GND GND

6DSR NA NA

7RTS NA NA

8CTS NA NA

9RI NA NA

Power Input jack

The power input jack allows you to connect a power

source. Power supplied through this jack supplies power

to the Embedded Computer.

WARNING! The power adapter may become warm to

hot when in use. Do not cover the adapter and keep

it away from your body.

External Fan connector with cable lock (reserved)

The external fan connector allows you to connect an

external fan for your Embedded Computer.

NOTE: An external fan option is currently not

available for standard models. If you have a

requirement for this option, please contact your sales

representative.

WARNING! An external fan must be installed with a

fan guard to prevent accidental contact with moving

parts.

Ignition LED

The ignition LED lights up when your Embedded

Computer is powered on and in ignition mode.

Watchdog LED

The watchdog LED lights up when a watchdog time out

event occurs.

Drive Activity LED

The drive activity LED lights up when your Embedded

Computer is accessing the internal storage drive.

Power LED

The power LED lights up when your Embedded Computer

is turned on and blinks slowly when in sleep mode.

Power button

The power button allows you to turn the Embedded

Computer on or o. You can use the power button to

put your Embedded Computer to sleep mode or press it

for four (4) seconds to force shutdown your Embedded

Computer.

1.1.3 Right view

Antenna jack

The antenna jack allows you to connect a wireless

antenna. Refer to the section for more Installing antennas

information on installing the antennas.

NOTE: SMA cables, antennas, and wireless modules

are purchased separately.

Antenna jack

The antenna jack allows you to connect a wireless

antenna. Refer to the section for more Installing antennas

information on installing the antennas.

NOTE: SMA cables, antennas, and wireless modules

are purchased separately.

2.5-inch Hot-swap Storage Bay

The 2.5-inch hot-swap storage bay allows you to install a

2.5-inch HDD/SSD and supports RAID 0/1.

Using your Embedded

Computer

2.1 Getting started

2.1.1 Connecting a power adapter to your

Embedded Computer

NOTE:

• The power adapter is optional and may not come bundled.

•

The optional power adapter may vary in appearance, depending on

model and country (or region) of sale. Refer to the following for more

information on the power adapter, as well as the system

330W Power adapter

Input voltage: 100 - 240 Vac

Input frequency: 50 - 60 Hz

Output current: 13.75 A (330 W)

Output voltage: 24.0 Vdc

Operating temperature : 0˚C to 40˚C

System

Rated input current: 41.25 A - 6.88 A (330 W)

Rated input voltage: 8 - 48 Vdc

Operating temperature : -20˚C to 60˚C

• We suggest using a power supply with 8 - 48 Vdc for DC-in that

complies with the safety requirements of a regulated power source.

IMPORTANT!

• We strongly recommend that you use a grounded wall socket while

using your Embedded Computer.

• The socket outlet must be easily accessible and near your

Embedded Computer.

• To disconnect your Embedded Computer from its main power

supply, unplug your Embedded Computer from the power socket.

If your Embedded Computer package comes bundled with a power adapter,

you may follow the steps below to set up your Embedded Computer.

A. Connect the power cord to the AC power adapter.

B. Connect the power terminal block to power jack adapter to the AC

adapter.

C. Connect the power terminal block to power jack adapter to your Edge

Computer’s power (DC) input, then secure it with the two screws on the

power terminal block to power jack adapter cable.

D. Plug the AC power adapter into a 100 V - 240 V power source.

Produktspecifikationer

Varumärke:	Asus
Kategori:	Inte kategoriserad
Modell:	PE3000G
Snäll:	Antivirusbeveiliging
Mobila operativsystem som stöds:	Symbian S60 3th Edition, Symbian S60 5th Edition, Symbian ^3, Windows Mobile 5, Windows Mobile 6, Windows Mobile 6.1, Windows Mobile 6.5
Stöder Windows:	Nee
Stöder Mac-operativsystem:	Nee
Minsta lagringsutrymme på hårddisken:	1 MB
Programvarutyp:	Crossgrade
Antal licenser:	- licentie(s)
Licensperiod (år):	3 jaar
Typ av distribution:	Download
Minsta RAM (klientdator):	1 MB
Obligatoriskt köp av licensnivå:	500 - 999 licentie(s)