Audio-Technica AE5400 Bruksanvisning

Audio-Technica mikrofon AE5400

Läs nedan 📖 manual på svenska för Audio-Technica AE5400 (2 sidor) i kategorin mikrofon. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

User Manual

Cardioid Condenser Handheld Microphone AE5400

■Features

■Notes on use

■Connection procedure

This product requires 48 V

DC phantom power.

Outp n sut termi al

PIN1 (ground)

PIN3

(cold)

PIN2 (hot)

■Speciﬁcations

Externally polarized (DC Bias) condenser

Cardioid

20 - 20,000 Hz

80 Hz, 12 dB/octave

-40 dB (10.0 mV) re 1V at 1 Pa

150 ohms

147 dB SPL, 1 kHz at 1% T.H.D.

157 dB SPL, with 10 dB pad (normal)

14 dB SPL

133 dB, 1 kHz at Max SPL

80 dB, 1 kHz at 1 Pa

11-52 V DC, 3 mA typical

High-pass ﬁlter,

10 dB pad (normal)

Integral 3-pin XLRM-type

• 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

* Typical, A-weighted, using Audio Precision System One.

■P r atternola p

■Fr r o eequency esp ns

180°

150°

120°

30°

0°

330°

300°

270°

240°

210°

Audio-Technica Corporation

2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan

Global Support Contact: www.at-globalsupport.com

11-DEC--2020 Form No.ATGC-L0389-20

LEGEND

0°, 50cm

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

200 Hz

1 kHz

5 kHz

8 kHz

Thank you for purchasing this product. Before using the product, read through the user

manual to ensure that you will use the product correctly.

Please keep this manual for future reference.

Oﬀering exceptional sound quality, the AE5400 uses the same condenser element as the

classic AT4050 studio microphone. This large diaphragm element ensures an accurate,

natural response. With a 80 Hz HPF switch and 10 dB pad, the sound can be perfectly

tailored to suit your voice. With a hardened steel body and grille and multi-stage internal

windshield, the AE5400 is rugged and durable, with exceptionally low handling noise and

protection against plosives and sibilance, making it a fantastic on stage microphone.

Output from the microphone’s XLRM-type connector is low impedance (Lo-Z) balanced. The

signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” –

positive acoustic pressure produces positive voltage at Pin 2.

When using the AE540 in settings with a stage monitor speaker, the speaker should be

located 180° oﬀ axis (at rear of the microphone). This placement, in conjunction with the

microphone's uniform cardioid pickup pattern, will virtually eliminate the possibility of

undesired audio feedback.

Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C

for extended periods. Extremely high humidity should also be avoided.

Connect e as a microphone the output terminals of the microphone to a d vice that h

input (balanced input) compatible with a phantom p er supply. The output connector ow

is an XLRM-type with polarity as shown in the ﬁgure below.

For product improvement, the product is sublect to modiﬁcation without notice.

• Same element as the renowned AT4050 studio condenser

• Condenser element gives pristine natural sound quality

• Hardened steel body and grille for rugged durability

• Cardioid polar pattern gives improved sound isolation

• Multi-stage grille for reduced plosives and sibilance

• Integral 80 Hz HPF switch and 10 dB pad

• Ergonomic design for easy handling

■Safety precaution

■Cautions for the product

Although this product was designed to be used safely, failing to use it correctly may result in

an accident. To ensure safety, observe all warnings and cautions while using the product.

• Do not subject the product to strong impact to avoid malfunction.

• Do not disassemble, modify or attempt to repair the product.

• Do not handle the product with wet hands to avoid electric shock or injury.

• Do not store the product under direct sunlight, near heating devices or in a hot, humid or

dusty place.

Element

Polar pattern

Frequency response

Low Frequency response

Open circuit sensitivity

Impedance

Maximum input sound level

Noise

Dynamic range (typical)

Signal-to-noise ratio

Phantom power requirements

Switch

Output connector

Roll-oﬀ

330 g

179.0 mm long, 50.0 mm head diameter,

33.0 mm to 22.0 mm tapered body diameter

Weight (less accessories)

Dimensions

Included accessories AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands;

soft protective pouch

60°

90°

Response in dB

Frequency in Hertz

-10

-20

-30

50010050 200 10k5k1k 2k 20k

10 dB

大振膜心形指向手持电容话筒 AE5400

本产品使用直流 48V 幻象电源。

输出端子

针脚1（接地）

针脚3

（负）

针脚2（正）

■规格

直流偏压型大振动膜电容膜片

心形指向性

20 - 20,000 Hz

80 Hz，12 dB/octave

-40 dB（10.0mV) 以 1V 于 1Pa

150 欧姆

直流 11-52V，3mA 典型

低截滤波，10 dB 衰减

元件

指向性

频率响应

高通滤波

开路灵敏度

输出阻抗

147 dB 声压, 1 kHz 于 1% T.H.D.

157 dB 声压, 于 10 dB 衰减 (正常)

14 dB 声压

最大承受声压

噪声

幻象供电

开关

• 1 帕＝ 10 达平方厘米＝ 10 微巴＝ 94 dB SPL因 /

* 典型，A 计权，使用 Audio Precision System One

因产品改进，本产品会随时改装，恕不另行通知。

■指向性

■频率响应

Audio-Technica Corporation

2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan

全球支持联系：www.at-globalsupport.com

响应单位是 dB

频率单位是赫兹

图例

0°，厘米50

比例是每分隔线 5 分贝

图例

200 赫兹

1 千赫兹

5 千赫兹

8 千赫兹

用戶手冊

感谢您购买本产品。在使用产品之前，请全文浏览本用户手册以确保您将正确地

使用本产品。请妥善保存本手册，以供将来参考。

■产品特点

• 与著名的 AT4050 录音棚话筒使用相同的收音元件

• 电容元件能提供原有的自然音色

• 强化的钢制主体和保护网格栅，坚固耐用

• 心形指向性设计，能提高收音目标的隔离度

• 多层式保护网格栅，减少爆破音和噪音干扰

• 内置 80Hz 高通滤波器及 10dB 衰减

• 人体工程学设计，易于手持

■使用注意事项

AE5400提供卓越的音质，与经典的AT4050录音棚话筒采用相同的电容收音元件

，这大型振膜元件可确保有准确、自然的响应。藉着 80Hz 高通滤波器及 10dB 衰

减，能更好地定制声音以适合收音需要。AE5400具有强化的钢制机体和保护网格

栅以及多层式内部挡风棉，坚固耐用，能防止破声，并具有更低的手持噪声，使

其成为舞台话筒的理想之选。

话筒的XLRM卡农输出端为低阻抗平衡输出，话筒音频信号最终以卡农公头的2号

及3号针脚输出，而1号针脚则为地线(屏蔽)连接。输出相位将以正相位电平设于2

号针脚上。

在设置有监听音箱的舞台中使用 AE5400 时，音箱应位于话筒偏离轴180°的位置

（即话筒的后方）。这种放置方式与话筒的心形指向收音方式相结合，能在无形

中消除不希望有的音频反馈声。

把话筒暴露于高温中可能导致输出电平逐渐及永久性减弱，应避免将话筒留在日

晒的地方或长时间置于温度超过43°C的地方，而极高湿度也应避免。

■连接步骤

将话筒的输出端子连接到具有兼容幻象电源的话筒输入（平衡输入）的设备。输

出接口是XLRM型接口，其极性如下图所示。

11-DEC-2020 Form No.ATGC-L0389-20

■安全预防措施

■本产品注意事项

虽然本产品采用安全设计，但使用不当仍可能发生事故。为了确保安全，使用本

产品时请注意全部警告和提醒。

• 切勿让本产品遭受强烈冲击，以避免发生故障。

• 切勿拆开、改装或尝试维修本产品。

• 切勿用湿手握持本产品，以免触电或受伤。

• 切勿将本产品存放在阳光直射的地方、加热装置附近或者炎热、潮湿或多尘的

地方。

高通滤波

133 dB, 1 kHz 于最高声压

80 dB, 1 kHz 于 1 Pa

动态范围 (典型)

信噪比

内置式 3 针卡农公头输出端子

330 克

长度 179.0 mm, 保护网直径 50.0 mm

锥形话筒身直径 33.0 mm 至 22.0 mm

重量

(不含配件)

尺寸

附带配件 AT8470 Quiet-Flex 防震式 5/ -27 接头话筒夹;8＂

保護袋

10 dB

-10

-20

-30

50010050 200 10k5k1k 2k 20k

180°

150°

120°

30°

0°

330°

300°

270°

240°

210°

60°

90°

Produktspecifikationer

Varumärke:	Audio-Technica
Kategori:	mikrofon
Modell:	AE5400

Behöver du hjälp?

Om du behöver hjälp med Audio-Technica AE5400 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

mikrofon Audio-Technica Manualer

Audio-Technica ATM355 Bruksanvisning

1 Mars 2025

Audio-Technica ATH-PDG1a Bruksanvisning

7 December 2024

Audio-Technica ATH-770XCOM Bruksanvisning

7 December 2024

Audio-Technica BP899LcH-TH Bruksanvisning

7 December 2024

Audio-Technica BP898cW Bruksanvisning

7 December 2024

Audio-Technica BP899c Bruksanvisning

7 December 2024

Audio-Technica BP899cH Bruksanvisning

7 December 2024

Audio-Technica BP899L Bruksanvisning

7 December 2024

Audio-Technica U857QSU Bruksanvisning

7 December 2024

Audio-Technica AT881TL/RC Bruksanvisning

7 December 2024

mikrofon Manualer

Nyaste mikrofon Manualer

Comica VP3 Bruksanvisning

2 April 2025

Atlas Sound MWHHM Bruksanvisning

2 April 2025

Synco G2A1 Bruksanvisning

2 April 2025

Synco PX Bruksanvisning

2 April 2025

Synco MC3 LITE Bruksanvisning

2 April 2025

Synco G2A2 Bruksanvisning

2 April 2025

Synco G1A1 Bruksanvisning

2 April 2025

Synco G1 Pro Bruksanvisning

2 April 2025

Synco G2 Max Bruksanvisning

2 April 2025

Sennheiser MD 42 Bruksanvisning

1 April 2025