Audio-Technica U841R Bruksanvisning

Audio-Technica mikrofon U841R

Läs nedan 📖 manual på svenska för Audio-Technica U841R (1 sidor) i kategorin mikrofon. Denna guide var användbar för 15 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/1
Specifications
Element Fixed-charge back plate, permanently polarized
condenser
Polar pattern Omnidirectional in hemisphere above mounting surface
Frequency response 40-20,000 Hz
Open circuit sensitivity -35 dB (17.7 mV), (0 dB = 1 V/Pa, 1 kHz)
Impedance 200 ohms
Maximum input sound level 130 dB SPL (1 kHz at 1% THD)
Dynamic range 105 dB (1 kHz at Max SPL)
Signal-to-noise ratio 69 dB (1 kHz at 1 Pa, A-weighted)
Phantom power requirements 11-52 V DC, 2 mA
Weight 84 g (3.0 oz)
Dimensions 65.0 mm (2.56") diameter, 15.1 mm (0.59") height
Output connector TB3M-type
Cable 7.6 m (25.0’) long, 3.2 mm (0.13") diameter, 2-conductor,
shielded cable with TA3F and XLRM-type connectors
Included accessories Pouch
• 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
For product improvement, the product is subject to modification without notice.
Polar pattern
180°
150°
120°
90°
60°
30°
0°
330°
300°
270°
240°
210°
Frequency response
10 dB
1k 10k 20K10040
20
10
0
-10
-20
-30
Dimensions
Warranty (Please be sure to read the notes below.) For USA Only
End-User LIMITED WARRANTY information for the USA is available at www.audio-
technica.com/usawarranties. You may also contact Audio-Technica U.S., Inc. to
request a written copy of the Limited Warranty at 1-330-686-2600 or via mail at 1221
Commerce Drive, Stow, OH 44224.
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2017 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
Made in Japan
ver.1 2017.05.02
142315960-01-02 ver.2 2017.08.31
Thank you for purchasing this product. Before using the product, read through
the user manual to ensure that you will use the product correctly. Please keep this
manual for future reference.
Features
• Designed for surface-mount applications such as high-quality sound reinforcement,
professional recording, television, conferencing and other demanding sound
pickup situations
• UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency
interference (RFI)
• Self-contained electronics eliminate need for external power module
• Small-diameter capsule near boundary eliminates phase distortion and delivers
clear, high-output performance
• Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of
surface vibration to the microphone
• Low-profile design with low-reflectance finish for minimum visibility
Safety precautions
Although this product was designed to be used safely, failing to use it correctly may
result in an accident. To ensure safety, observe all warnings and cautions while using
the product.
Cautions for the product
• Do not subject the product to strong impact to avoid malfunction.
• Do not disassemble, modify or attempt to repair the product.
• Do not handle the product with wet hands to avoid electric shock or injury.
• Do not store the product under direct sunlight, near heating devices or in a hot,
humid or dusty place.
Notes on use
• The microphone should be placed on a flat, unobstructed mounting surface. The
sound source should not be below the plane of the mounting surface.
• Audio-Technica has developed a special RFI-shielding mechanism, which is an
integral part of the connectors in the UniPoint® line. If you remove or replace the
connectors, you may adversely affect the unit's RFI immunity.
• Placing any object on a surface (such as a conference table) before its finish is fully
cured may result in damage to the finish.
Connection procedure
Connect the output terminals of the microphone to a device that has a microphone
input (balanced input) compatible with a phantom power supply.
The output connector is an XLRM-type with polarity as shown in the figure below.
This product requires 11-52 V
DC phantom power.
Output terminals
PIN1 (ground)
PIN3
(cold)
PIN2 (hot)
User Manual
Omnidirectional Condenser Boundary Microphone
U841R
Response in dB
Frequency in Hertz
LEGEND
0°, 50cm
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
200Hz
1kHz
5kHz
8kHz
15.1
7600
(Unit: mm)
Φ
65

Produktspecifikationer

Varumärke: Audio-Technica
Kategori: mikrofon
Modell: U841R

Behöver du hjälp?

Om du behöver hjälp med Audio-Technica U841R ställ en fråga nedan och andra användare kommer att svara dig


mikrofon Audio-Technica Manualer

Audio-Technica

Audio-Technica ATH-PDG1a Bruksanvisning

7 December 2024
Audio-Technica

Audio-Technica ATH-770XCOM Bruksanvisning

7 December 2024
Audio-Technica

Audio-Technica BP899LcH-TH Bruksanvisning

7 December 2024
Audio-Technica

Audio-Technica BP898cW Bruksanvisning

7 December 2024
Audio-Technica

Audio-Technica BP899c Bruksanvisning

7 December 2024
Audio-Technica

Audio-Technica BP899cH Bruksanvisning

7 December 2024
Audio-Technica

Audio-Technica BP899L Bruksanvisning

7 December 2024
Audio-Technica

Audio-Technica U857QSU Bruksanvisning

7 December 2024
Audio-Technica

Audio-Technica AT881TL/RC Bruksanvisning

7 December 2024
Audio-Technica

Audio-Technica U857QL Bruksanvisning

7 December 2024

mikrofon Manualer

Nyaste mikrofon Manualer

Vonyx

Vonyx CMS320B Bruksanvisning

16 Januari 2025
Karma

Karma SET 6252A Bruksanvisning

16 Januari 2025
DJI

DJI Mic Mini Bruksanvisning

15 Januari 2025
Sound Devices

Sound Devices Astral A20-HH Bruksanvisning

14 Januari 2025
HyperX

HyperX QuadCast S Bruksanvisning

8 Januari 2025
Monacor

Monacor ECM-306BU/SW Bruksanvisning

8 Januari 2025
Schertler

Schertler STAT-C Bruksanvisning

7 Januari 2025
Godox

Godox Cube-C Bruksanvisning

7 Januari 2025
Audibax

Audibax AWM 401 TD Bruksanvisning

6 Januari 2025
Audibax

Audibax Sidney 1250 A Bruksanvisning

6 Januari 2025