Audio-Technica U891RWb Bruksanvisning

Läs nedan 📖 manual på svenska för Audio-Technica U891RWb (1 sidor) i kategorin mikrofon. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
User Manual
CARDIOID CONDENSER BOUNDARY MICROPHONE
U891Rb/U891RWb
Introduction
Thank you for purchasing this product. Before using the product, read through the
user manual to ensure that you will use the product correctly.
Please keep this manual for future reference.
Features
Cardioid condenser boundary microphone with switch
Designed for surface-mount applications such as high-quality sound
reinforcement, professional recording, television, conferencing and other
demanding sound pickup situations
The capacitive touch switch can be set to any of three operating modes:
“touch-on/touch-off”, “touch-to-talk” and “touch-to-mute”
Integral, phantom-powered, two-state RGB LED indicator displays on/off status
of microphone
PivotPoint™ rotating output connector allows cable to exit from either the rear
or the bottom of the microphone
Superior off-axis rejection for maximum gain before feedback
UniGuard™ RFI-shielding technology offers outstanding rejection of radio
frequency interference (RFI)
Small-diameter UniPoint™ capsule near boundary eliminates phase distortion
and delivers clear, high-output performance
Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling
of surface vibration to the microphone
Low-profile design with low-reflectance finish for minimum visibility
Threaded inserts on bottom of microphone allow it to be mounted with screws
for increased security
Available in two colors: black (U891Rb) and white (U891RWb)
Connection procedure
Connect the output terminals of the microphone to a device that has a
microphone input (balanced input) compatible with a phantom power supply.
The output connector is an XLRM-type with polarity as shown in the figure below.
1 2
3
PIN1 (ground)
PIN3 (cold)
Output terminals
PIN2 (hot)
This product requires
phantom power.
Specifications
Element
Fixed-charge back plate, permanently polarized condenser
Polar pattern Cardioid
Frequency response 20 - 20,000 Hz
Low frequency roll-o 80 Hz, 18 dB/octave
Open circuit sensitivity -34 dB (19.9 mV) (0dB=1V/Pa, 1kHz)
Impedance 50 ohms
Maximum input sound level 130 dB SPL (1kHz at 1% THD)
Noise 26 dB SPL (A-weighted)
Dynamic range 104 dB (1kHz at Max SPL)
Signal-to-noise ratio 68 dB (1kHz at 1Pa, A-weighted)
Phantom power requirements 11 - 52 V DC, 9.3 mA
Switches Low cut: on/off; Switch function: touch on/off,
momentary on, momentary off
Weight 253 g (8.9 oz)
Dimensions 23 mm (0.91") × 83.9 mm (3.3") × 108 mm (4.25")
(H×W×D)
Output connector TB3M-type (Microphone)
3-pin XLRM-type (Cable)
Optional interchangeable elements UE-O omnidirectional (360°), UE-H hypercardioid (100°)
Included accessories
U891Rb: 7.6 m (24.9') Microphone black cable (TA3F,
XLRM), Pouch
U891RWb: 7.6 m (24.9') Microphone white cable (TA3F,
XLRM), Pouch
1 Pascal = 10 dynes/cm
2 = 10 microbars = 94 dB SPL
For product improvement, the product is subject to modification without notice.
Polar pattern
240˚
180˚
210˚
270˚
300˚
330˚
150˚
120˚
90˚
30˚
60˚
LEGEND
200Hz
1kHz
5kHz
8kHz
SCALE IS 5 DECIBELS PER DIVISION
Frequency response
10 dB
50 100 200 500 1k 2k 5k 10k 20k20
Frequency in Hertz
LEGEND
0°, 50 cm
0°, 50 cm, Low cut
Dimensions
50.2
50
83.9
108
23
57
2-M3 P=0.5
(Unit: mm)
Included accessories
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2019 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
Made in Japan 142419861-01-01 ver.1 2019.01.15

Produktspecifikationer

Varumärke: Audio-Technica
Kategori: mikrofon
Modell: U891RWb

Behöver du hjälp?

Om du behöver hjälp med Audio-Technica U891RWb ställ en fråga nedan och andra användare kommer att svara dig




mikrofon Audio-Technica Manualer

mikrofon Manualer

Nyaste mikrofon Manualer