Audix D2 Bruksanvisning

Audix mikrofon D2

Läs nedan 📖 manual på svenska för Audix D2 (2 sidor) i kategorin mikrofon. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

OVERVIEW:

Designed, machined, assembled and tested by Audix in the

USA, the D2 is a dynamic instrument microphone used for stage,

studio and broadcast applications. The D2 is characterized with

a hypercardioid pickup pattern for isolation and feedback control

and is equipped with a VLM™ (Very Low Mass) diaphragm for

natural, accurate sound reproduction.

The D2 is lightweight, compact and easy to position. With a wide

frequency response of 80 Hz - 18 kHz and the ability to handle

sound pressure levels in excess of 144 dB, the D2 is an excellent

choice for miking instruments with a percussive nature such as

rack toms, congas, saxophone, guitar cabinets and brass.

Roadworthy construction includes a precision machined

aluminum body, black anodized nish, laser etched model and

serial number, steel mesh grill, Switchcraft® XLR connector and

includes a tension-t heavy duty nylon mic clip.

Transformerless design, low impedance and balanced output

allow for interference-free performance even with long cable runs.

APPLICATIONS:

Rack toms, congas, floor tom

Guitar and bass cabinets

Saxophone, brass

SUPPLIED ACCESSORIES:

Tension-fit heavy duty mic clip (DCLIP)

Carrying pouch (P1)

OPTIONAL ACCESSORIES:

TRIPOD - Mic stand

DFLEX - All purpose percussion clamp

DVICE - Spring loaded rim mount clamp

DCLAMP - Tension rod mic clamp

CBL-DR25 - 25’ right angle XLR cable

STAND-KD - Adjustable short boom mic stand

CAB GRABBER - Tension held mic holder, clamps to guitar cabinets

DYNAMIC INSTRUMENT MICROPHONE

Dynamic Instrument

DCLAMP DFLEX DVICE & CBL-DR25 w/ D2 CAB GRABBER STAND-KD

FEATURES:

Compact, lightweight

Machined aluminum body

VLM (very low mass) diaphragm

Studio quality sound

Excellent mid-bass transient response

Handles extremely high SPL without distortion

Roadworthy construction

5 year warranty

SPECIFICATIONS: ARCHITECTS AND ENGINEERS SPECIFICATIONS:

The microphone shall be of the dynamic type operating on the moving coil principle and the

capsule shall be VLM Type B. The polar pattern of the microphone shall be hypercardioid. The

nominal output impedance shall be 250 ohms at 1 kHz.The microphone shall have a sensitivity of

1.2 mV / Pa at 1 kHz and will handle a sound pressure level of 144 dB. The microphone body ≥

shall be machined of aluminum and the grill cap shall be steel wire mesh. The overall dimensions

shall be 21.5 mm in diameter at the base, 39 mm in diameter at the widest point and 100 mm in

length. The microphone shall be the Audix D2.

www.audixusa.com Call: 503-682-6933 Fax: 503-682-7114

Audix Corporation 9400 SW Barber Street, Wilsonville, OR 97070

SERVICE AND WARRANTY:

This microphone is under warranty

for a period of 5 years from any and

all manufacturing defects. Should

your microphone fail in any way,

please contact the Audix Service

department at 503-682-6933. A Return

Authorization number is required

before returning any products.

CARE AND MAINTENANCE:

The D2 is manufactured to exacting specs with

roadworthy construction. However, the capsule

is highly sensitive and should be handled with

care. Avoid extreme temperatures and be sure

to store your microphone in the pouch provided

when not in use. Moisture of any kind can

adversely aect the sound and performance of

your microphone.

OPERATION:

The D2 is a low impedance microphone and should be plugged into a “mic level” of your console,

mixer, or recording device. Please note that your microphone does not require phantom power

and will not be eected in any way by phantom power should it be running simultaneously while

the microphone is in operation. Avoid plugging or unplugging the microphone from the PA system

unless the channel is muted or the volume of the system turned down. Failure to do so may result

in a loud “popping” noise which could seriously damage the speakers in the PA system.

USER TIPS:

The D2 has an extremely tight (hypercardioid) pick-up pattern in order to help eliminate sound

from other instruments on stage from “bleeding” into the microphone. For this reason, it the D2

is exceptionally eective in capturing the sound of each component of a drum or percussion kit.

Drums, hand percussion: As a general rule, the bottom of the D2 grill should be 1-2 inches

above the head of the drum and pointed towards the center. For more “ring” pull the mic back

towards the rim. For less ring and more overtones, position the mic 1-2 inches inside the ring. For

more attack, place the mic very close to the head and for more overtones and decay move the

mic further away from the head.

Guitar cabinets: The D2 can be placed within 1-2 inches of the grill cover at a 90 degree angle

pointing directly into the speaker. If the mic is placed closer to the edge of the speaker, you will

minimize the higher frequencies and get a warmer, fatter tone. To capture more highs, move the

mic closer towards the center of the speaker, but avoid the middle of the speaker.

Horns: Place the mic within 1-2 inches of the bell, especially when on a stage with drums, bass,

guitar, etc. For jazz, classical, and music where the stage volume is lower, the mic can be placed

further away for a richer, fuller sound.

*Further miking techniques may be found on our website at www.audixusa.com

FREQUENCY / POLARS:

***All specications subject to change without notice.

To register your

microphone, please visit

www.audixusa.com

DIMENSIONS (mm):

Transducer Type Dynamic

Frequency Response 80 Hz - 18 kHz

Polar Pattern Hypercardioid

Output Impedance 250 ohms

Sensitivity 1.2 mV / Pa @ 1k

Capsule Technology VLM Type B

O Axis Rejection >30 dB

Maximum SPL ≥144 dB

Power Requirements None

Connector Switchcraft® male

XLR connector

Polarity Positive pressure on diaphragm

produces positive voltage on pin 2

relative to pin 3 of output

XLR connector

Housing / Finish Machined Aluminum /

Black Hard Coat

Weight 128 g / 4.5 ounces

Length 100 mm / 3.9 inches

Produktspecifikationer

Varumärke:	Audix
Kategori:	mikrofon
Modell:	D2
Färg på produkten:	Grijs
Vikt:	38000 g
Bredd:	615 mm
Djup:	514 mm
Höjd:	430 mm
Snäll:	Trolley met PA-geluidssysteem
Husmaterial:	Polyethyleen
Internationell säkerhetskod (IP):	IP55
Blåtand:	Nee
Anslutningsteknik:	Bedraad
Monteringsmetod:	Plafond
Ursprungsland:	Italië
Genomsnittlig effekt:	1000 W
Antal högtalare:	1
Plug and play:	Ja
Antal per paket:	1 stuk(s)
Rekommenderad användning:	Universeel
Impedans:	8 Ohm
Lämplig för utomhusbruk:	Ja
Ljudutgångskanaler:	- kanalen
Högtalarplacering:	Vliegbaar
Antal förare:	2
Bashögtalare:	Ja
Diameter drivrutin:	36.56 mm
Frekvensomfång:	60 - 20000 Hz
Känslighet:	110 dB
Typ av högtalare:	2-weg
Högtalarhölje:	Gesloten
Diameter woofer:	14 "
Crossover frekvens:	1200 Hz
Ljudtrycksnivå (max):	137 dB
Material för högtalargaller:	Staal