Audix TM1 Bruksanvisning

Audix mikrofon TM1

Läs nedan 📖 manual på svenska för Audix TM1 (2 sidor) i kategorin mikrofon. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

TM1

OVERVIEW

The TM1 is a 6 mm pre-polarized condenser microphone used for test and

measurement applications. The TM1 is known for its linearity, accurate response,

consistency, ease of use and a ordability.

Characterized with a uniformly controlled omni-directional polar pattern, the TM1 is

designed to capture acoustic measurements for room analysis software programs,

real time analyzers and other sound control devices. With a  at frequency range of 20

Hz – 20 kHz, the TM1 is an excellent tool for sound engineers, sound companies and

recording enthusiasts.

Requiring 24 - 48 Volts phantom power for operation, the TM1 features a precision

machined 4-stage brass body and capsule housing, nickel plate  nish, Switchcraft ®

or Audix XLR, shock absorbent O-rings and heavy duty snap to  t mic clip.

SUPPLIED ACCESSORIES

DCLIP -

Heavy duty tension  t mic clip

P1 - Carrying pouch

OPTIONAL ACCESSORIES

CBL20 - 20’ XLR-XLR quad conductor mic cable

SMT19 - Shock mount clip

SMT25 - Shock mount system

TM1CA4231 - Calibration adapter

TRIPOD - Tripod mic stand

WSTM1 - Threaded windscreen

Test & Measurement

Microphone

TM1

FEATURES

· 6mm pre-polarized condenser capsule

· Hi SPL response

· Precision machined brass housings

· Low noise electronics

· Replaceable electronics and capsule

· 3 year warranty

APPLICATIONS

· Test and measurement

· Real time analyzers

· Room analysis software programs

· Ambient room miking

WSTM1 TM1CA4231 SMT19 CBL20 TRIPOD

DCLIP P1 SMT25

Transducer Type

Pre-polarized Condenser

Frequency Response

20 Hz - 20 kHz +/-2 dB

Polar Pattern

Omni

Output Impedance

200 ohms

Sensitivity

6 mV / Pa @ 1k

Maximum SPL

130 dB with distortion <1%

140 dB Max

Signal to Noise Ratio

66 dB

Equivalent Noise Level

28 dB (A weighted)

Dynamic Range

112 dB

Connector

male XLR

Power Requirements

24 - 48 V Phantom

Power Consumption

8.9 mA @ 48 Volts

Polarity

Positive pressure on diaphragm

produces positive voltage on

pin 2 relative to pin 3 of output

XLR connector

Materials / Finish

4 piece precision machined

brass / Nickel Finish

Weight

132 g / 4.7 oz

Length

150 mm / 5.9 in

FREQUENCY RESPONSE

POLAR PATTERNS

ARCHITECT AND ENGINEER SPECIFICATIONS

The microphone shall be a back plate pre-polarized condenser with an

omni-directional polar pattern. The microphone shall operate on 24 - 48

Volts phantom power and the nominal output impedance shall be equal to

200 ohms at 1 kHz. The microphone shall have a sensitivity of 6 mV ± 3 dB /

Pa at 1 kHz. The microphone shall have a maximum SPL level of 130 dB with

a THD of 1%. The microphone shall be machined from brass with dimensions

of 19 mm diameter at the base, 7.7 mm diameter at the top and 150 mm in

length. The microphone shall be the Audix TM1.

OPERATION AND MAINTENANCE

The TM1 is a low impedance microphone and should be plugged into a

“mic level” input on your console, mixer or recording device. The TM1 will

NOT operate without phantom power voltage (24 Volts minimum) which is

available on most professional mic preamps and mixing devices. If phantom

power is not available on your equipment, you will have to purchase

a phantom power supply (such as the Audix APS2). Avoid plugging or

unplugging the microphone into a PA system unless the channel is muted

or the volume of the system is turned down. Failure to do so may result in a

loud “popping” noise which could seriously damage the speakers in the PA

system.

USER TIPS

Measurement: The TM1 is an excellent choice for room analysis programs

and real time analyzers. Just be sure that you are plugging the microphone

into a low impedance input and that phantom power is available.

Ambient room application: The TM1 may be used to capture the “room sound”

for in ear monitors. Typically, you would set up one microphone on each side

of the stage in a mic stand facing the audience.

Recording: The TM1 is extremely  at and accurate and has an excellent sound.

Because of its small pro le, it can be used in conjunction with portable

recording devices for live stereo miking. The TM1 is also excellent for miking

acoustic instruments and room ambience.

Further miking techniques may be found at www.audixusa.com.

ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

www.audixusa.com

503.682.6933 Fax: 503.682.7114

Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070

v 5.1

PRODUCT REGISTRATION: Please register your product online at www.audixusa.com/docs_12/about/product_registration.shtml.

SERVICE AND WARRANTY:

This microphone is under warranty for a period of 3 years to be free of defects in material and workmanship. In the event of a product failure due to materials or

workmanship, Audix will repair or replace said product at no charge with proof of purchase. Audix does not pay or reimburse shipping costs for warranty repairs or returns. The warranty excludes

any causes other than manufacturing defects, such as normal wear, abuse, environmental damage, shipping damage or failure to use or maintain the product per the supplied instructions. No

Implied Warranties: All implied warranties, including but not limited to implied warranties of merchantability and  tness for a particular purpose are hereby excluded. The liability of Audix, if any,

for damages relating to allegedly defective products shall be limited to the actual price paid by Dealer for such products and shall in no event include incidental or consequential damages of

any kind. Should your microphone fail in any way, please contact the Audix Service department at 503.682.6933. A Return Authorization is required before returning any product. OTHER THAN

THIS WARRANTY, AUDIX MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, THE USE OF THE PRODUCTS, THE PERFORMANCE OF THE PRODUCTS. AUDIX SHALL

NOT BE LIABLE FOR SPECIAL INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES ARISING FROM OR BASED ON THE SALE, USE, STORAGE OR DISPOSAL OF THE PRODUCTS, AUDIX’S

SERVICE WORK, BREACH OF WARRANTY, BREACH OF CONTRACT. NEGLIGENCE, OR ANY OTHER THEORY OF LIABILITY, EVEN IF AUDIX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

DIMENSIONS (mm)

SPECIFICATIONS

TM1