Auray BAI-2N Bruksanvisning

Läs nedan 📖 manual på svenska för Auray BAI-2N (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
Two-Section Broadcast Arm
BAI Series
Owners Manual
with Internal Springs
2BAI SeriesOwner’s Manual
Introduction
Thank you for choosing the Auray two-section broadcast arm with
internal springs. This versatile and sturdy broadcast arm is for studio as
well as home use, and is ideal for broadcast, voiceovers or podcasts.
The BAI-series broadcast arms are designed with internal springs
that provide a clean and sleek look. The internal balance springs are
precision engineered to support and hold in place microphones of
up to 5 lb. (2.27 kg). The design also minimizes handling noise when
repositioning the arm. The broadcast arm features a standard 5/8˝27
microphone stud mount that is compatible with most shockmounts
and microphone clips. The angle of the microphone stud mount can be
adjusted and secured with the locking knob, and the angle is maintained
when repositioning the arm eliminating the need to readjust it every
time the arm is moved. An extension of up to 40 inches and the ability
to rotate the arm 360° allow for precise microphone placement.
The BAI series features a heavy-duty combo mount that consists of a sturdy
C-clamp and a heavy-metal desktop mount. The C-clamp is capable of
fastening onto desktops up to 2.3-inches thick. The C-clamps slim design
minimizes the clearance needed to mount it between the desk and wall.
The desktop mount detaches from the C-clamp and provides the option of
permanent installation to a desktop with the mounting screws (included).
A 14-inch riser is included for adding height to the broadcast
arm in order to extend over computer or studio monitors.
Options are available with integrated 15-foot Kopul 2000 XLR cable
(BAI-2X), or a 10-foot Type A to Type B USB cable (BAI-2U).
3BAI Series Owner’s Manual
4
6
Broadcast Arm
Threaded microphone mount 1
Microphone locking knob 2
Base stud 3
Combo mount
C-clamp 4
Tightening handle 5
Desktop mount 6
Insert hole 7
Insert hole locking knob 8
Screw holes (5) 9
Mounting screws (4) 10
Riser
Mounting stud 11
Riser insert hole 12
Riser locking knob 13
Microphone cable
XLR microphone cable (BAI-2X only) 14
USB cable (BAI-2U only) (Not Shown)
Overview
1
3
7
2
8
5
12
10
13
11
9
14

Produktspecifikationer

Varumärke: Auray
Kategori: Inte kategoriserad
Modell: BAI-2N

Behöver du hjälp?

Om du behöver hjälp med Auray BAI-2N ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Auray Manualer

Auray

Auray RF-PBO Bruksanvisning

14 September 2024
Auray

Auray CFC-610 Bruksanvisning

14 September 2024
Auray

Auray COHH-FD1 Bruksanvisning

14 September 2024
Auray

Auray RFDT-128 Bruksanvisning

14 September 2024
Auray

Auray CFP-ET6 Bruksanvisning

14 September 2024
Auray

Auray BP-59A Bruksanvisning

14 September 2024
Auray

Auray RF-5P-B Bruksanvisning

14 September 2024
Auray

Auray PBS-AH Bruksanvisning

14 September 2024
Auray

Auray BP-36A Bruksanvisning

14 September 2024
Auray

Auray LTS-ST Bruksanvisning

14 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer