BeamZ BBP94 Bruksanvisning

BeamZ Lättnad BBP94

Läs nedan 📖 manual på svenska för BeamZ BBP94 (34 sidor) i kategorin Lättnad. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/34

BBP94 UPLIGHT PAR

Ref. nr.: 150.589

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.0

ENGLISH

Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order to

benefit fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the unit is switched on for the first time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualified technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the product on. Contact your dealer.

Do NOT connect the product to a rheostat or dimmer.

- To avoid fire and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualified technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used for a longer period of

time, condensation may occur. Let the unit reach room

temperature before you switch it on.

- Never use the product in humid rooms or outdoors.

- During operation, the housing becomes very hot. Do not

touch it during operation and immediately after.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Secure the product with an extra safety chain if the unit is

ceiling mount. Use a truss system with clamps. Make

sure nobody stands in the mounting area. Mount the

effect at least 50cm away from inflammable material and

leave at least 1 meter space on every side to ensure

sufficient cooling.

- rThis p oduct contains high intensity LEDs. Do not look

into the LED light to prevent damage to your eyes.

- Do not repeatedly switch the product on and off. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Only operate the product with clean hands.

- Do not force the controls.

- If the product has fallen, always have it checked by a

qualified technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the product with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product off prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains vol 240Vac/50Hz. Check if power tage is 220-

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- Keep the original packing material so that you can

transport the product in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic

attacks should be aware of the effects that this light effect may have on them.

The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate

and their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.

S pecifications can be changed without prior notice.

prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the . This would also product

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. cannot be held responsible for personal injuries caused by a disrespect of the safety Beamz

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving , carefully unpack the carton, check the contents to ensure that all parts are the product

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original

factory box and packing.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the is indicated on this type of power supply must be connected. Check that the mains product

voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also

be directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate

electrical ground to avoid the risk of electrocution or fire.

RECHARGEABLE BATTERY OPERATION

Prior to operating the device off mains for the first time, the rechargeable battery must be fully charged.

1 Switch on the device with the power switch. The operating time of the battery depends on the operating mode and the ambient

temperature. After the operation, switch the device off.

2 For charging the battery, connect the device to a power outlet via the enclosed adapter (12.6Vdc 2A). The device may be

operated during the charging procedure.

3 The device features a protective circuit for charging which prevents overload of the rechargeable battery. However, disconnect

the device from the mains after charging. Otherwise there will be a low current consumption even if the device is switched off.

4 The device will heat up during charging; this is normal.

5 To prevent damage to the battery by deep discharge, recharge a battery completely discharged as soon as possible. Do not

store the unit with the battery completely discharged and regularly recharge the battery in case of long storage.

INSTALLATION

Attention:

• The installation of the product has to be built and constructed in a way that it can hold 10 times the weight for 1 hour

without any harming deformation.

• The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This

secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main

attachment fails.

• Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.

• The operator has to make sure that safety-relating and machine-technical installations are approved by an expert

before taking into operation for the first time and after changes before taking into operation another time.

• The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled

person once a year.

• The fixture should be installed in the position where persons cannot reach and where persons may walk by or be

seated.

CAUTION: Please consider the respective national norms during the

installation! The installation must only be carried out by an

authorized employee or dealers!

CAUTION:

When installing the device, make sure there is no highly in

inflammable material (decoration articles, etc.) in between a

distance of min 0 .5 meter.

Produktspecifikationer

Varumärke:	BeamZ
Kategori:	Lättnad
Modell:	BBP94
Färg på produkten:	Zwart
Förpackningens vikt:	6500 g
Strömförsörjning:	230V
Beeldscherm:	LCD
Skärm diagonal:	19 "
Upplösning:	1440 x 990 Pixels
Original bildförhållande:	4:3
Betraktningsvinkel, horisontell:	160 °
Betraktningsvinkel, vertikal:	160 °
Ljusstyrka:	300 cd/m²
Zoomkapacitet:	Ja
Förpackningsmått (BxDxH):	514 x 191 x 417 mm
Antal USB 2.0-portar:	1
Antal HDMI-portar:	1
Inbyggda högtalare:	Ja
Genomsnittlig effekt:	6 W
Hörlursutgångar:	1
HD typ:	WXGA
Displayteknik:	LCD
Respons tid:	5 ms
Panelmonteringsgränssnitt:	75 x 75 mm
Kontrastförhållande (dynamisk):	1000:1
Djup (utan bas):	71 mm
Höjd (utan bas):	337 mm
Bredd (utan bas):	457 mm
Vikt (utan bas):	5280 g
Enhetsbredd (med stativ):	457 mm
Djupenhet (med stativ):	155 mm
Enhetshöjd (med stativ):	366 mm
Text-TV:	Ja
Elektronisk TV-guide:	Ja
On Screen Display (OSD):	Ja
Automatisk kanalsökning:	Ja
Typ av mat:	AC
Bildstorlek (diagonal):	482 mm
Antal SCART-portar:	1
Digitalt ljud, koaxialutgång:	1
DVD-spelare:	Ja
Antal kanaler:	200 kanalen
Inklusive DVD-spelare/inspelare:	DVD speler
Antal CardBus PCMCIA-platser:	1
Fjärrkontroll ingår:	Ja
Slaaptimer:	Ja