BeamZ S1800 DMX 160.493 Bruksanvisning

BeamZ Effektmaskin S1800 DMX 160.493

Läs nedan 📖 manual på svenska för BeamZ S1800 DMX 160.493 (16 sidor) i kategorin Effektmaskin. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/16

Ref. Nr. 160.493

S DMX 1800

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUEL D'INSTRUCTIONS

V1.1

- 2 -

- 3 -

ENGLISH

Warning:

- The smokemachine must be placed at least 100 cm away from inflammable materials such as curtains, books,

etc. Make sure that the housing cannot be touched by accident.

- For indoor use only.

- During installation, nobody should stand beneath the mounting area.

- Prior to the first use, have the unit checked by a qualified person.

- The unit contains voltage carrying parts. DO NOT open the smokemachine

- Never plug or unplug the unit with wet hands.

- If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.

- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains outlet. It

needs to be repaired by a qualified technician.

- Only connect this unit to an earthed mains outlet of 230Vac/50Hz .

- Always unplug the unit during a thunderstorm or when it is not in use.

- If the unit has not been used for a longer period of time, condensation can occur inside the housing. Please let

the unit reach room temperature prior to use.

- When you unplug the unit from the mains always pull the plug, never the lead.

- In order to avoid accidents in public premises, the local legal requirements and safety regulations/warnings must

be fulfilled.

- Keep out of the reach of children.

Safety

Plug the smoke machine only in an earthed mains outlet or extension cord! ATTENTION: the powercord can only be

replaced by an original replacement, supplied by Tronios. Be careful when filling the fluid tank. First of all, unplug the

mains lead! Then unscrew the cap on the tank and fill it by means of a funnel. Only use the original Beamz smoke fluid

which is environmental friendly and, if used correctly, leaves no residues. Do not obstruct the openings on top of the case

to guarantee a good ventilation. The heating element of the smoke machine generates heat which needs to be removed.

Don’t put any objects on the smoke machine.

Installation and Use

Unpack the fog machine. Do not connect yet the net cable. Connect the lead of the manual control with the 3 pin plug at -

the rear of the smoke machine. Fill the fluid tank by means of a funnel. Plug the unit into a mains outlet. Thus the heating

element is automatically switched on. Depending on the room temperature, it takes about 6 minutes until the working

temperature is reached. Then the thermostat is clicking and the LED on the manual control lights up. Push the switch once

and the smoke machine will produce a nice thick fog. Once the smoke machine has reached its working temperature (the

LED is lit) the smoke machine can produce continuously fog during max 1 After this period of time, the fog minute.

generator is cooled so much down that the thermostat switches off. Wait a few minutes until the working temperature is

reached again. It is recommended to produce smoke with small pauses in between so that the temperature is maintained

and the thermostat doesn’t switch off. Use the smoke machine only when it is placed on the ground.

NOTE: Nozzle can be very HOT !!

Produktspecifikationer

Varumärke:	BeamZ
Kategori:	Effektmaskin
Modell:	S1800 DMX 160.493
Typ av operation:	Knoppen
Vikt:	25000 g
Bredd:	500 mm
Djup:	1790 mm
Höjd:	530 mm
Blåtand:	Ja
Bredd hopfälld:	510 mm
Djup när den är hopfälld:	920 mm
Höjd hopfälld:	1120 mm
Hjärtfrekvensdataöverföring:	Bluetooth
Type beeldscherm:	LCD
Träningsparametrar visas:	Calories, Distance, Evolutions per minute (RPM), Heart rate, Speed, Time, Watt
Max användarvikt:	110 kg
Prestandamonitor:	Ja
Svänghjulets vikt:	5500 g