Bestway 58389 Bruksanvisning

Bestway Inte kategoriserad 58389

Läs nedan 📖 manual på svenska för Bestway 58389 (16 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 16 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/16

A版: 英/法/西/葡/意/波/匈 S-S-001204

Filter Pump

Model: #58122

Model: #58123

Hmax 1.0m Hmin 0.19m IPX5

OWNER’S MANUAL

www.bestway-service.com

Water flow

Water level

>1/2 inches

Water flow

P6112

P6029

Inlet

Outlet

Connection Valve

Inside wall

Pool

2m (For France only)

WARNING

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

WARNING TO REDUCE THE RISK OF INJURY,– do not permit children to

use this product unless they are closely supervised at all times.

WARNING RISK OF ELECTRIC SHOCK – – The pump must be supplied by

an isolating transformer or supplied through a residual current device(RCD)

having a rated residual operating current not exceeding 30mA.

WARNING RISK OF ELECTRIC SHOCK – – The pump must be supplied by

an isolating transformer or supplied through a circuit of alternative residual

power (DDR) 30mA maximum. (For France Only)

WARNING RISK OF ELECTRIC SHOCK – – The pump cannot be using

while people are inside the pool. Forbid the access of the pool in case of

damage of the filter pump.

DO NOT BURY CORD. Locate cord to minimize abuse from lawn mowers,

hedge trimmers, and other equipment.

WARNING If the supply cord is damaged, it must be replaced by the –

manufacturer, its service agent or similarly qualified persons in order to

avoid a hazard.

WARNING – To reduce the risk of electric shock, do not use extension cord to

connect unit to electric supply; Provide a properly located outlet.

CAUTION – This pump is for use with storable pools only. Do not use with

permanently-installed pools. A storable pool is constructed so that it is capable

of being readily disassembled for storage and reassembled to its original

integrity. A permanently-installed pool is constructed in or on the ground or in

a building such that it cannot be readily disassembled for storage.

IMPORTANT – Using the pump with an unmatched electrical supply is

dangerous and will result in catastrophic failure of pump.

RISK OF ELECTRICAL SHOCK – When working with electricity, turn the

electrical power off at the circuit breaker and lock breaker door. Failure to do

so will result in increased risk of shock, injury and possibly death.

DO NOT REMOVE THE GROUNDING PRONG OR MODIFY THE PLUG IN

ANY WAY. DO NOT USE ADAPTOR PLUGS. Consult a qualified electrician

for any questions related to the validity of your plugs grounding.

Handle the pump with care. Do not pull or carry the pump by the power cord.

Never pull a plug from the outlet by yanking the power cord. Keep cord free

from abrasions. Sharp objects, oil, moving parts, and heat should never be

exposed to the filter pump.

WARNING – This appliance is not intended for use by persons (Including

children) with reduced physical, sensor or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their

safety. Children should be supervised to ensure that they do not play with the

appliance.

NOTE: Please examine equipment before use. Notify Bestway at the

customer service address listed on this manual for any manufacturing defect

or missing parts at the time of purchase. Verify that the equipment

components represent the filter pump model that you had intended to

purchase.

NOTE: Place pump on a solid and level ground. Please ensure the filter pump

is at least one meter away from the pool. Pay attention to position of pool and

pump so adequate ventilation, drainage, and access for cleaning is available.

Never place pump in an area that may accumulate water, or in an area where

foot traffic will flow around the pool.

Please ensure the filter pump is at least 2 meters away from the pool side.

(For France only)

It is necessary to have the plug accessible after installation of the pool.

The plug of pump shall be at least 3,50m away from the pool. (For France

only)

Electric installations should fulfill the requirements of standards NFC 15-100.

(For France only)

NOTE: Atmospheric conditions may affect the performance and life span of

your filter pump. Take precautions to protect filter pump from unnecessary

wear and tear that may occur during periods of cold, heat and exposure to

sun.

It is imperative to change as soon as possible all the deteriorated parts. Only

use the parts approved by the manufacturer.

NOTE: Do not run the pump more than 15 hours per day.

When chemical products are used to clean the pool water, it is recommended

to respect a minimum filtration time to preserve the health of swimmers which

depends on compliance of health regulation.

NOTE: Do not add chemicals in the filter pump.

NOTE: This product is not intended for commercial use.

SAVE THESE INSTRUCTIONS.

Pump Installation Directions

PART I

Internal Filter Pump Inspection

1) Remove the Filter Cap by unscrewing the Filter Cap Retainer.

2) Inspect the Filter Cartridge ensuring it is centered in the Filter Pump.

3) After inspection, check that the Filter Cap Seal is in place, replace the Filter

Cap and screw the Filter Cap Retainer into position.

Part II

Attach the Hoses to the Filter Pump and the Pool

1) Connect the two Hoses to the pool’s Inlet and Outlet Connection Valves by

screwing the threaded locking rings into position.

NOTE: Install the Connection Valves following the Connection Valve

installation directions.

2) Attach the Hoses to the Filter Pump by screwing the threaded locking rings

into position; ensure the corresponding letters on both the pool and the

Filter Pump match (A to A, B to B).

NOTE: After pump is attached to pool, refer to pool manual for filling

instructions.

NOTE: It is imperative to check that the hydraulic connectors are not

obturated.

Pedestal Fixing

EN60335-2-41 TEST standard requires the filter pump must be vertically fixed

on ground or a certain pedestal made of wood or concrete before use. There

should be two holes 9mm in diameter on the pedestal, the space between

which should be 163mm. Put filter pump on the pedestal and fix them together

by fasten the bolts and nuts. All the pedestal parts should weigh over 18kgs at

least to prevent the pump from accidental falling.

390

163

390

250

163

2-M8 bolt

2-M8 nut

PART III

Preparing the System for Use

1) Open/unscrew the Air Purge Valve on the top of the Filter Pump; air is

released as water fills the Filter Pump.

2) When water comes out of the Air Purge Valve screw it closed and wipe

away any water.

3) To start the Filter Pump, Insert the plug of the filter pump to a residual

current device (RCD).

To start the Filter Pump, Insert the plug of the filter pump to a circuit of

alternative residual power (DDR)-For France Only.

NOTE: To prevent the risk of electrical shock, ensure your hands are

completely dry when plugging-in the Filter Pump.

NOTE: To prevent the risk of electrical shock, never run the Filter Pump when

people are swimming in the pool.

IMPORTANT: DO NOT DRY RUN THE FILTER PUMP – Make sure both the

pool’s Inlet and Outlet valves are fully covered by water before operating the

Filter Pump.

Pump Installation Diagram

PUMP MAINTENANCE

CAUTION: YOU MUST ENSURE THE FILTER PUMP IS UNPLUGGED

BEFORE ANY MAINTENANCE BEGINS OR SEVERE RISK OF INJURY OR

DEATH EXISTS.

Take action to avoid using pools if the filter has problem.

Check the suction if there is any blocking.

Replace all the damaged components.

Part I

Stop Water Flowing to the Filter Pump

1) Unplug the Filter Pump.

2) Close the Connection Valves.

Part II

Cleaning/Replacing the Filter Cartridge

Do not use product during filter cartridge maintenance.

Illustration (not to scale) of pool and filter-pump

S-S-001204

PUMP DISPOSAL

Meaning of crossed -out wheeled dustbin:

Do not dispose of electrical appliances as unsorted municipal waste, use

separate collection facilities.

Contact your local government for information regarding the collection

systems available.

If electrical appliances are disposed of in landfills or dumps, hazardous

substances can leak into the groundwater and get into the food chain,

damaging your health and well-being.

When replacing old appliances with new ones, the retailer is legally

obligated to take back your old appliance for disposals at least free of

charge.

PUMP STORAGE

CAUTION: YOU MUST ENSURE THE FILTER PUMP IS UNPLUGGED

BEFORE ANY MAINTENANCE BEGINS OR SEVERE RISK OF INJURY

OR DEATH EXISTS.

1) Unplug the Filter Pump.

2) Follow the instructions as previously outline to stop water flowing to the

Filter Pump and to remove the Filter Cartridge.

3) Discard the Filter Cartridge.

4) Detach all Hoses.

5) Dry all components thoroughly.

6) Store the filter pump in a dry location out of child’s reach.

7) Drain the pool according to the Pool Owner’s Manual.

NOTE: We recommend the use of a wet dry vacuum to dry all components.

NOTE: Coating the Filter Cap Seal with petroleum jelly will greatly enhance

its life span.

PUMP WARRANTY

For information concerning pump warranty please visit our website

at: www.bestway-service.com

Check filter cartridge regularly.

1) Unscrew the Filter Cap Retainer and remove the Filter Cap.

2) Clean the Filter Cartridge with a garden hose.

NOTE: If filter cartridge remains soiled or discolored, replacement is

necessary.

IMPORTANT: For sanitary reasons we suggest replacing the Filter

Cartridge every two weeks.

3) Insert the cleaned Filter Cartridge; ensure it is centered in the Filter

Pump.

4) Check that the Filter Cap Seal is in place.

5) Replace the Filter Cap and screw the Filter Cap Retainer into position.

6) Open the Connection Valves.

7) Open the Air Purge Valve to remove any air from the system as outlined

in Pump Installation Directions PART III: Preparing the System for Use.

To order spare parts of the filter pump, please provide us with part no.

and part name.

P6112

P6113

P6115

P6H115

P6117

P6119

58012(III)

NAME

Air purge valve

Purge valve seal

Filter cap retainer (blue)

Filter cap retainer (grey)

Filter cap

Filter cap seal

Filter cartridge

Hose

Hose (For France)

Hose Seal Ring

P6112

P6113

P6115

P6H115

P6117

P6119

58012(III)

P6517

P6518

P6029

No.

P6029

Water Outlet

P6517

(For France Only)

P6518

Infall

Information required

Name:

Address:

Zipcode:

City:

Country:

Telephone:

Mobile:

E-MAIL:

Fax:

Limited BESTWAY

® Manufacturer’s Warranty

The product you have purchased comes accompanied a limited warranty.

Bestway®

stands behind our quality guarantee and assures, through a

replacement warranty, your product will be free from manufacturer’s defects

that result in leaks.

To enact a claim, this warranty card must be filled out completely and

returned along with:

1. Your purchase receipt

2. Tear out the label on your pump, and copy them to your purchase receipt

3. Filter cap retainer to be sent by post to the address of the after - sales

centre contacted, for details please refer to your country according to the

information you find on the back cover.

Bestway®

is not responsible for economic loss due to water or chemical

costs. With the exception of replacement product, the results of leak are not

Bestway®

responsibility. Bestway® will not place any products deemed to

have been neglected or having been used outside of the owner’s manual

guidelines.

All the information given need to be complete in order to receive our

assistance.

You have to send also a copy of your purchase receipt together with

this fax.

YOU CAN ALSO VISIT OUR WEB SITE: www.bestway-service.com

For request of spare parts consumer has to send us also the page of the

manual with a cross near the missing or faulty part.

FAX/E-MAIL/TEL: Please refer to your country according to the information

you find on the back cover

Please provide your address details in full. Note: Incomplete address

details will result in delayed shipments.

Ensure there is clear path, free of objects and debris for the area outlined in

the chart below.

WARRANTY 2012

TO: BESTWAY®

SERVICE DEPARTMENT

Water leaking

Others, please describe

Stopped working

Description of problem

Item is incomplete, Which part is missing - Please put the code you

find on the instruction manual

Flow rate

330GAL

530GAL, 800GAL,

1300GAL,1500GAL

2100GAL,

2500GAL

P6114

P6115

P6023

P6H114

P6H115

P6H023

Part No.

(Blue)

Part No.

(Grey)

Figure of filter

cap retainer

DATE

Customer Code Number

330GAL

58145

58145GB

58145GS

530GAL

58148

58148GB

58149

58148GS

800GAL

58117

58117GB

58118

58117GS

58122

58122GB

58123

58122GS

58221

58221GB

58229

1300GAL/1500GAL 2100GAL/2500GAL

S-S-001204

Produktspecifikationer

Varumärke:	Bestway
Kategori:	Inte kategoriserad
Modell:	58389

Behöver du hjälp?

Om du behöver hjälp med Bestway 58389 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad Bestway Manualer

Bestway H2OGO! 43839 Bruksanvisning

29 Mars 2025

Bestway HydroLuxe 43103 Bruksanvisning

29 Mars 2025

Bestway 68002 Bruksanvisning

29 Mars 2025

Bestway 43836 Bruksanvisning

29 Mars 2025

Bestway 52699 Bruksanvisning

29 Mars 2025

Bestway 52698 Bruksanvisning

29 Mars 2025

Bestway 68145 Bruksanvisning

29 Mars 2025

Bestway 52729 Bruksanvisning

29 Mars 2025

Bestway 43644 Bruksanvisning

8 Januari 2025

Bestway 58775 Bruksanvisning

26 December 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

IFM SF3210 Bruksanvisning

1 April 2025

Voltcraft FIT-100 Bruksanvisning

1 April 2025

Makita AC320H Bruksanvisning

1 April 2025

Samsung RS6JA8810B1 Bruksanvisning

1 April 2025

IFM MK5312 Bruksanvisning

1 April 2025

Bartscher 700-4T 1800 Bruksanvisning

1 April 2025

IFM RU6045 Bruksanvisning

1 April 2025

Crestron CAEN-1X1 Bruksanvisning

1 April 2025

Crestron CAEN-4X2 Bruksanvisning

1 April 2025

Hamlet HXD25TCU31 Bruksanvisning

1 April 2025