Biostar A58MD 6.x Bruksanvisning
Läs nedan 📖 manual på svenska för Biostar A58MD 6.x (49 sidor) i kategorin moderkort. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/49
A58MD / A58MG / A58ML Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents
here and specially disclaims any implied warranties of merchantability or fitness
for any purpose. Further the vendor reserves the right to revise this publication
and to make changes to the contents here without obligation to notify any party
beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and we
will not be responsible for any mistakes found in this user’s manual. All the brand
and product names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied
Table of Contents
Chapter 1: Introduction ...............................................................1
1.1 Before You Start......................................................................... 1
1.2 Package Checklist ..................................................................... 1
1.3 Motherboard Specifications....................................................... 2
1.4 Rear Panel Connectors ............................................................. 3
1.5 Motherboard Layout .................................................................. 4
Chapter 2: Hardware Installation................................................5
2.1 Install Central Processing Unit (CPU) ....................................... 5
2.2 Install a Heatsink ....................................................................... 5
2.3 Connect Cooling Fans............................................................... 7
2.4 Install System Memory .............................................................. 8
2.5 Expansion Slots....................................................................... 10
2.6 Jumper Setting .........................................................................11
2.7 Headers & Connectors ............................................................ 12
Chapter 3: UEFI BIOS & Software.............................................16
3.1 UEFI BIOS Setup .................................................................... 16
3.2 BIOS Update ........................................................................... 16
3.3 Software................................................................................... 21
Chapter 4: Useful Help ..............................................................24
4.1 Driver Installation..................................................................... 24
4.2 AMI BIOS Beep Code.............................................................. 25
4.3 Troubleshooting....................................................................... 25
4.4 RAID Functions ....................................................................... 26
4.5 AMD DUAL Graphics Technology ........................................... 28
Appendix: Specifications In Other Languages .......................30
Arabic ......................................................................................................... 30
French ........................................................................................................ 32
German....................................................................................................... 34
Italian.......................................................................................................... 36
Japanese.................................................................................................... 38
Polish.......................................................................................................... 40
Portuguese ................................................................................................. 42
Russian....................................................................................................... 44
Spanish....................................................................................................... 46
A58MD/A58MG/A58ML
1
CHAPTER 1: INTRODUCTION
1.1 Before You Start
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet before
operation.
Before you take the motherboard out from anti-static bag,
ground yourself properly by touching any safely grounded
appliance, or use grounded wrist strap to remove the static
charge.
Avoid touching the components on motherboard or the rear
side of the board unless necessary. Hold the board on the
edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the case
after installation. Loose parts will cause short circuits which
may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be 0 to
45 degrees Celsius.
To avoid injury, be careful of:
Sharp pins on headers and connectors
Rough edges and sharp corners on the chassis
Damage to wires that could cause a short circuit
1.2 Package Checklist
; Serial ATA Cable p3-x2
; Rear I/O Panel for ATX Case p3-x1
; Installation Guide p3-x1
; Fully Setup Driver DVD p3-x1
Note: The package contents may be different due to the sales region or models in which it was
sold. For more information about the standard package in your region, please contact your dealer
or sales representative.
Motherboard Manual
2
1.3 Motherboard Specifications
Specifications
CPU Support
Socket FM2+/FM2 for AMD A-series processor
Maximum CPU TDP (Thermal Design Power): 100Watt
* Please refer to www.biostar.com.tw for CPU support list.
Chipset AMD A58/A55 FCH
Memory
Supports Dual Channel DDR3 800/ 1066/ 1333/ 1600/ 1866/ 2133/ 2400(OC)/
2600(OC)
2 x DDR3 DIMM Memory Slot, Max. Supports up to 32 GB Memory
Each DIMM supports non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 module
* Please refer to www.biostar.com.tw for Memory support list.
Storage
AMD A58/A55 FCH
4x SATA 3Gb/s Connector
Supports RAID 0,1,10 & AHCI
LAN
Realtek RTL 8111G (A58MD, A58MG)
10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability
Realtek RTL 8106E (A58ML)
10/ 100 Mb/s auto negotiation, Half / Full duplex capability
Audio Codec ALC662
5.1 Channels, High Definition Audio
USB AMD A58/A55 FCH
8x USB 2.0 port (4 on rear I/Os and 4 via internal headers)
Expansion Slots 1x PCIe p4-x1 Slot
1x PCIe 3.0 x16 Slot (Only FM2+ processors can support PCIe 3.0.)
Rear I/Os
1x PS/2 Mouse
1x PS/2 Keyboard
1x VGA Port
1x DVI Port (A58MD)
1x LAN port
4x USB 2.0 Port
3x Audio Jack
Internal I/Os
4x SATA 3.0Gb/s Connector
2x USB 2.0 Header (each header supports 2 USB 2.0 ports)
1x 4-Pin Power Connector
1x 24-Pin Power Connector
1x CPU Fan Connector
1x System Fan Connector
1x Front Panel Header
1x Front Audio Header
1x Clear CMOS Header
1x Serial Port Header
1x Chassis Speaker Header
Form Factor microATX Form Factor, 218 mm x 174 mm
OS Support
Windows XP / 7 / 8 / 8.1
Biostar reserves the right to add or remove support for any OS with or without
notice.
A58MD/A58MG/A58ML
3
1.4 Rear Panel Connectors
A58MD
A58MG/ A58ML
Note 1: DVI-D / VGA Output require an AMD family processor with intedrated graphics.
Note 2: The mainboard supports two independent display outputs. (A58MD)
Note 3: Since the audio chip supports High Definition Audio Specification, the function of each
audio jack can be defined by software. The input / output function of each audio jack
listed above represents the default setting. However, when connecting external
microphone to the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack.
Note 4: Maximum resolution:
Outputs Maximum resolution Bit Depth
1920 x 1200 @60Hz 30 bpp
DVI-D 2560 x 1600 @60Hz 24 bpp
VGA 1920 x 1600 @60Hz --
Motherboard Manual
4
1.5 Motherboard Layout
Note: ■ represents the 1st pin.
A58MD/A58MG/A58ML
5
CHAPTER 2: HARDWARE INSTALLATION
2.1 Install Central Processing Unit (CPU)
Step 1: Locate the CPU socket on the motherboard
Step 2: Pull the socket locking out from the socket and then raise the lever up
to a 90-degree angel.
Step 3: Look for the white triangle on socket, and the gold triangle on CPU
should point towards this white triangle. The CPU will fit only in the
correct orientation.
Motherboard Manual
6
Step 4: Hold the CPU down firmly, and then close the lever to locked the
position
2.2 Install a Heatsink
Step 1: Place the heatsink and fan assembly onto the retention frame. Match the
heatsink clip with the socket mounting-lug. Hook the spring clip to the
mounting-lug.
Step 2: On the other side, push the retention clip straight down to lock into the
plastic lug on the retention frame, and then press down the locker until it
stops.
Note1: Do not forget to connect the CPU fan connector.
Note2: For proper installation, please kindly refer to the installation manual of your CPU
heatsink.
A58MD/A58MG/A58ML
7
2.3 Connect Cooling Fans
These fan headers support cooling-fans built in the computer. The fan cable and
connector may be different according to the fan manufacturer. Connect the fan
cable to the connector while matching the black wire to pin#1.
CPU_FAN1: CPU Fan Header
Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate sense
4 Smart Fan Control(By Fan)
SYS_FAN1: System Fan Header
Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate sense
Note: CPU_FAN1, SYS_FAN1 support 4-pin and 3-pin head connectors. When connecting
with wires onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected to GND.
Motherboard Manual
8
2.4 Install System Memory
A. DDR3 Modules
Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM
on the slot such that the notch on the DIMM matches the break on the slot.
Step 2: Insert the DIMM vertically and firmly into the slot until the retaining clips
snap back in place and the DIMM is properly seated.
Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
A58MD/A58MG/A58ML
9
B. Memory Capacity
DIMM Socket Location DDR3 Module Total Memory Size
DDR3_A1 512MB/1GB/2GB/4GB/8GB/16GB
DDR3_B1 512MB/1GB/2GB/4GB/8GB/16GB Max is 32GB.
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DDR3_A1 DDR3_B1
Disabled O X
Disabled X O
Enabled O O
(O means memory installed, X means memory not installed.)
Note: The DRAM bus width of the memory module must be the same (x8 or x16)
Motherboard Manual
10
2.5 Expansion Slots
PEX16_1: PCI-Express Gen3 x16 Slot
- PCI-Express 3.0 compliant.
- Maximum theoretical realized bandwidth of 16GB/s simultaneously per
direction, for an aggregate of 32GB/s totally.
- Only FM2+ processors can support PCIe 3.0.
PEX1_1: PCI-Express Gen2 p12-x1 Slot
- PCI-Express 2.0 compliant.
- Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total
Install an Expansion Card
You can install your expansion card by following steps:
1. Read the related expansion card's instruction document before install the
expansion card into the computer.
2. Remove your computer's chassis cover, screws and slot bracket from the
computer.
3. Place a card in the expansion slot and press down on the card until it is
completely seated in the slot.
4. Secure the card’s metal bracket to the chassis back panel with a screw.
5. Replace your computer's chassis cover.
6. Power on the computer, if necessary, change BIOS settings for the
expansion card.
7. Install related driver for the expansion card.
A58MD/A58MG/A58ML
11
2.6 Jumper Setting
The illustration shows how to set up jumpers. When the jumper cap is placed on
pins, the jumper is “close”, if not, that means the jumper is “open”.
Pin opened Pin closed Pin1-2 closed
JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
31
Pin 1-2 Close:
Normal Operation (default).
31
Pin 2-3 Close:
Clear CMOS data.
※
※
※
※※ Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to “Pin 2-3 close”.
3. Wait for five seconds.
4. Set the jumper to “Pin 1-2 close”.
5. Power on the AC.
6. Load Optimal Defaults and save settings in CMOS.
Motherboard Manual
12
2.7 Headers & Connectors
ATXPWR1: ATX Power Source Connector
For better compatibility, we recommend to use a standard ATX 24-pin power
supply for this connector. Make sure to find the correct orientation before
plugging the connector.
Pin Assignment Pin Assignment
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V
ATXPWR2: ATX Power Source Connector
This connector will provide +12V to CPU power circuit.
Pin Assignment
1 +12V
2 +12V
3 Ground
4 Ground
Note1: Before you power on the system, please make sure that both ATXPWR1 and
ATXPWR2 connectors have been plugged-in.
Note2: Insufficient power supplied to the system may result in instability or the
peripherals not functioning properly. Use of a PSU with a higher power output is
recommended when configuring a system with more power-consuming devices.
A58MD/A58MG/A58ML
13
JPANEL1: Front Panel Header
This connector includes Power-on, Reset, HDD LED and Power LED
connections. It allows user to connect the PC case’s front panel switch functions.
Pin Assignment Function Pin Assignment Function
1 N/A N/A 2 Power LED (+)
3 HDD LED(+) 4 Power LED (+)
5 HDD LED(-)
HDD LED
6 Power LED (-)
Power LED
7 Ground 8 Power Button
9 Reset Control
Reset Button
10 Ground
Power-On Button
JSPKR1: Chassis Speaker Header
Please connect the chassis speaker to this header.
Pin Assignment
1 +5V
2 N/A
3 N/A
4 Speaker
Motherboard Manual
14
SATA1~SATA4: Serial ATA 3.0 Gb/s Connectors
These connectors connect to SATA hard disk drives via SATA cables.
Pin Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
7 Ground
F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with a wide range of simultaneously accessible
external Plug and Play peripherals.
Pin Assignment
1 +5V (fused)
2 +5V (fused)
3 USB-
4 USB-
5 USB+
6 USB+
7 Ground
8 Ground
9 NC
10 Key
A58MD/A58MG/A58ML
15
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header supports HD and AC’97 audio front panel connector.
HD Audio AC’97
Pin Assignment Pin Assignment
1 Mic Left in 1 Mic In
2 Ground 2 Ground
3 Mic Right in 3 Mic Power
4 GPIO 4 Audio Power
5 Right line in 5 RT Line Out
6 Jack Sense 6 RT Line Out
7 Front Sense 7 Reserved
8 Key 8 Key
9 Left line in 9 LFT Line Out
10 Jack Sense 10 LFT Line Out
Note1: It is recommended that you connect a high-definition front panel audio module to
this connector to avail of the motherboard's high definition audio capability.
Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an
AC'97 front audio output cable. The function can be found via O.S. Audio Utility.
J_COM1: Serial Port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
Pin Assignment
1 Carrier detect
2 Received data
3 Transmitted data
4 Data terminal read
y
5 Si
g
nal
g
round
6 Data set read
y
7 Request to send
8 Clear to send
9 Ring indicator
10 NC
Motherboard Manual
16
CHAPTER 3: UEFI BIOS & SOFTWARE
3.1 UEFI BIOS Setup
For better system performance, the UEFI BIOS firmware is being
continuously updated. The UEFI BIOS information described below in this
manual is for your reference only and the actual UEFI BIOS information
and settings on board may be different from this manual
For further information of setting up the UEFI BIOS, please refer to the
UEFI BIOS Manual in the Setup DVD.
3.2 BIOS Update
There are three ways to update the BIOS:
BIOS Update Utility, BIOS Online Update Utility and BIOS Flasher.
1. BIOS Update Utility
1. Installing BIOS Update Utility from the DVD Driver.
2. Download the proper BIOS from www.biostar.com.tw .
3. Open BIOS Update Utility and
click the Update BIOS button on
the main screen.
4. A warning message will show
up to request your agreement to
start the BIOS update. Click OK to
start the update procedure.
5. Choose the location for your
BIOS file in the system. Please
select the proper BIOS file, and
then click on Open. It will take
several minutes, please be
patient.
A58MD/A58MG/A58ML
17
6. After the BIOS Update process is
finished, click on OK to reboot the
system.
7. While the system boots up and the full screen logo shows up, please press
the <Delete> key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.
Backup BIOS
Click the Backup BIOS button on the
main screen for the backup of BIOS,
and select a proper location for your
backup BIOS file in the system, and
click Save.
Motherboard Manual
18
2. Online Update Utility
1. Installing BIOS Update Utility from the DVD Driver.
2. Please make sure the system is connected to the internet before using this
function.
3. Open BIOS Update Utility and
click the Online Update button
on the main screen.
4. An open dialog will show up to
request your agreement to
start the BIOS update. Click
Yes to start the online update
procedure.
5. If there is a new BIOS version,
the utility will ask you to
download it. Click Yes to
proceed.
6. After the download is
completed, you will be asked
to program (update) the BIOS
or not. Click Yes to proceed.
7. After the updating process is
finished, you will be asked you
to reboot the system. Click OK
to reboot.
A58MD/A58MG/A58ML
19
8. While the system boots up and the full screen logo shows up, press
<Delete> key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.
3. BIOSTAR BIOS Flasher
BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and
simple way to update your BIOS via USB pen drive.
Note1: This utility only allows storage device with FAT32/16 format and single partition.
Note2: Shutting down or resetting the system while updating the BIOS will lead to system
boot failure.
The BIOSTAR BIOS Flasher is built in the BIOS ROM. To enter the utility, press
<F12> during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIOSTAR BIOS Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, copy and save the BIOS file into a USB flash (pen) drive.
3. Insert the USB pen drive that contains the BIOS file to the USB port.
4. Power on or reset the computer and then press <F12> during the POST process.
5. After entering the POST screen, the
BIOS-FLASHER utility pops out.
Choose [fs0] to search for the BIOS
file.
Motherboard Manual
20
6. Select the proper BIOS file, and a
message asking if you are sure to
flash the BIOS file. Click Yes to start
updating BIOS.
7. A dialog pops out after BIOS flash is
completed, asking you to restart the
system. Press the [Y] key to restart
system.
8. While the system boots up and the full screen logo shows up, press
<Delete> key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.
A58MD/A58MG/A58ML
21
3.3 Software
Installing Software
1. Insert the Setup DVD to the optical drive. The driver installation program would
appear if the Autorun function has been enabled.
2. Select Software Installation, and then click on the respective software title.
3. Follow the on-screen instructions to complete the installation.
Note1: All the information and content about following software are subject to be changed
without notice. For better performance, the software is being continuously updated.
Note2: The information and pictures described below are for your reference only. The actual
information and settings on board may be slightly different from this manual.
Launching Software
After the installation process is completed, you will see the software icon showing on
the desktop. Double-click the icon to launch it.
eHot-Line
eHot-Line is a convenient utility that helps you to contact with our Tech-Support
system. This utility will collect the system information which is useful for analyzing the
problem you may have encountered, and then send these information to our
tech-support department to help you fix the problem.
Note: Before you use this utility, please set Outlook Express as your default e-mail client application
program.
This block will show
the information which
would be collected in
the mail.
Provide the e-mail
address that you would
like to send the copy to.
Provide the name of
the power supply
manufacturer and the
model no.
Send the mail out.
Save these information to a .txt file
Exit this dialog.
Select your area or
the area close to you.
*
Provide the name of
the memory module
manufacturer.
*
Describe condition
of your system.
*
*
represents important
information that you
must provide. Without
this information, you may
not be able to send out
the mail.
A58MD/A58MG/A58ML
23
BIOScreen Utility
This utility allows you to personalize your boot logo easily. You can choose BMP as
your boot logo so as to customize your computer.
Please follow the step-by-step instructions below to update boot logo:
z Load Image：Choose the picture as the boot logo.
z Transform：Transform the picture for BIOS and preview the result.
z Update Bios：Write the picture to BIOS Memory to complete the update
Motherboard Manual
24
CHAPTER 4: USEFUL HELP
4.1 Driver Installation
After you installed your operating system, please insert the Fully Setup Driver
DVD into your optical drive and install the driver for better system performance.
You will see the following window after you insert the DVD
The setup guide will auto detect your motherboard and operating system.
Note: If this window didn’t show up after you insert the Driver DVD, please use file
browser to locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will list the
compatible driver for your motherboard and operating system. Click on each
device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide will
list the software available for your system, click on each software title to launch
the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver DVD.
Click on the Manual icon to browse for available manual.
Note: You will need Acrobat Reader to open the manual file. Please download the latest
version of Acrobat Reader software from http://get.adobe.com/reader/
A58MD/A58MG/A58ML
25
4.2 AMI BIOS Beep Code
Boot Block Beep Codes
Number of Beeps Description
Continuing Memory sizing error or Memory module not found
POST BIOS Beep Codes
Number of Beeps Description
1 Success booting.
8 Display memory error (system video adapter)
4.3 Troubleshooting
Probable Solution
1. There is no power in the system.
Power LED does not shine; the fan
of the power supply does not work
2. Indicator light on keyboard does
not shine.
1. Make sure power cable is securely
plugged in.
2. Replace cable.
3. Contact technical support.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
Using even pressure on both ends of the
DIMM, press down firmly until the module
snaps into place.
System does not boot from a hard disk
drive, but can be booted from optical
drive.
1. Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged in;
check the drive type in the standard
CMOS setup.
2. Backing up the hard drive is
extremely important. All hard disks
are capable of breaking down at any
time.
System only boots from an optical
drive. Hard disks can be read,
applications can be used, but system
fails to boot from a hard disk.
1. Back up data and applications files.
2. Reformat the hard drive. Re-install
applications and data using backup
disks.
Screen message shows “Invalid
Configuration” or “CMOS Failure.”
Review system’s equipment. Make sure
correct information is in setup.
System cannot boot after user installs
a second hard drive.
1. Set master/slave jumpers correctly.
2. Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility with
other drives.
Motherboard Manual
26
CPU Overheated
If the system shutdown automatically after power on system for seconds,
that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown automatically
to avoid a damage of the CPU, and the system may not power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
4.4 RAID Functions
RAID Definitions
RAID 0:
In a RAID 0 system data are split up in blocks that get
written across all the drives in the array. By using multiple
disks (at least 2) at the same time, this offers superior I/O
performance. This performance can be enhanced further
by using multiple controllers, ideally one controller per
disk.
Features and Benefits
Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platform.
Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files. No capacity
loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array fails, all
data is lost.
Fault Tolerance: No.
Total Capacity: (Minimal. HDD Capacity) x (Connected HDDs Amount)
Motherboard Manual
28
4.5 AMD DUAL Graphics Technology
AMD Dual Graphics Technology Introduction
When user adds a PCIE display adapter, it can be integrated with IGD to
show better performance. To make the two video devices work
simultaneously and normally, please refer to the following setting.
AMD Dual Graphics Requirement
Dual Graphics only supports with dual channel memory configuration
Operating System: Windows 7 / Windows 8 / Windows 8.1
Supported Dual Graphics Combinations:
Kaveri APUs
AMD Radeon Graphics Card™ A10-Series
Radeon™ R7
A8-Series
Radeon™ R7
A6-Series
Radeon™ R5
“Oland” XT, R7 250 ● ●(Note2) (Note2)
“Oland” Pro 6CU, R7 240 ● ●(Note2) (Note2)
“Oland” Pro 5CU, R7 240 ● ●(Note2) (Note2)
“Oland” Pro 64b, R7 240 -- --
Under
Investigation
Richland APUs
AMD Radeon Graphics Card™ A10-Series
HD 8670D
A8-Series
HD8570D
A6-Series
HD 8470D
“Oland” XT, HD 8870 ● ● ● (Note2)
“Oland” Pro, HD 8850 ● ● ●
“Turks” XT, HD 6670 ● ● ●
“Turks” Pro, HD 6570 ● ● ●
“Caicos” Pro, HD 6450 ● ● ●
Trinity APUs
AMD Radeon Graphics Card™ A10-Series
HD 7660D
A8-Series
HD7560D
A6-Series
HD 7540D
“Turks” XT, HD 6670 ● ● --
“Turks” Pro, HD 6570 ● ● ●
“Caicos” Pro, HD 6450 -- -- ●
● Recommended graphics cards for AMD dual-graphics
Note 1: A4-Series CPUs do not support Dual Graphics.
Note 2: Only available for DDR3 graphics memory
Note 3: The information described above in this manual is for your reference only and the
actual information and settings on board may be different from this manual. For further AMD
Dual Graphics information, please visit the following website: http://www.amd.com
Motherboard Manual
30
APPENDIX: Specifications In Other Languages
Arabic
تﺎﻔﺻاﻮﻤﻟا
ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ةﺪﻋﺎﻗ
ﺔﻳﺰآﺮﻤﻟا
ﺬﺧﺄﻤﻟاFM2+/FM2 ىد مإ ﻪﻳا ﺞﻟﺎﻌﻤﻟAMD ﻞﺴﻼﺴﺗA
ﻢﻴﻤﺼﺗ ﻲﻓ ﺔﻳراﺮﺤﻟا ﺔﻗﺎﻄﻼﻟ ﻰﺼﻗﻷا ﺪﺤﻟا ﺞﻟﺎﻌﻤﻟا )TDP – thermal design power :(100طاو .
* ﻊﻗﻮﻤﻟا ﻰﻟإ عﻮﺟﺮﻟا ﻰﺟﺮﻳwww.biostar.com.tw ﺎﻘﻟﺞﻟﺎﻌﻤﻟا ﻢﻋد ﺔﻤﺋ CPU.
ﺢﺋاﺮﺸﻟا ﺔﻋﻮﻤﺠﻣ ىد مإ ﻪﻳا AMD A58/A55 FCH
ةﺮآاﺬﻟا
يد ﺔﺟودﺰﻣ ةﺎﻨﻗ ﻢﻋﺪﺗ .يد .را .DDR3 800 / 1066 / 1333 / 1600 /1866 /2133/2400(OC)/
2600(OC)
2x يد .يد .را .DDR3 ﺔﺟودﺰﻤﻟا ةﺮآاﺬﻟا تﺎﺤﺘﻓ DIMMﻰﺼﻗأ ﺪﺤآ ﻞﻤﺤﺘﺗ ، 32ةﺮآاذ ﺖﻳﺎﺑﺎﺠﻴﺟ
ﺔﺟودﺰﻣ ﺔﺤﺘﻓ ﻞآ DIMM نود ﻞﻤﺤﺘﺗECC 512 ﺖﻳﺎﺑ ﺎﺠﻴﻣ/1/2/4/8/16يد ﺖﻳﺎﺑﺎﺠﻴﺟ .يد . راDDR3
* ﻊﻗﻮﻤﻟا ﻰﻟإ عﻮﺟﺮﻟا ﻰﺟﺮﻳwww.biostar.com.tw ةﺮآاﺬﻟا ﻢﻋد ﺔﻤﺋﺎﻘﻟ.
ﻦﻳﺰﺨﺘﻟا
ىد مإ ﻪﻳاAMD A58/A55 FCH:
ﺔﻼﺻوx4 ﺎﺗﺎﺳSATA 3 ﺖﻳﺎﺑ ﺎﺠﻴﺟ /ﺔﻴﻧﺎﺜﻟا
ﺪﻳار ﻞﻤﺤﺘﺗ RAID 0 / 1 / 10 / AHCI
ﺔﻴﻼﺤﻣ ﺔﻜﺒﺷLAN
ل تر ﻚﻴﺘﻟﺎﻴﻳرRTL 8111G (A58MD, A58MG), REALTEK
10 / 100 / 1000 ﺖﻳﺎﺑﺎﺠﻴﻣ / ﻒﺼﻨﻟا ، ﻲﺋﺎﻘﻼﺗ ﺪﻳﺪﺤﺗ ، ﺔﻴﻧﺎﺜﻟا /ﺔﺟودﺰﻤﻟا ىﻮﺼﻘﻟا ةرﺪﻘﻟا
ل تر ﻚﻴﺘﻟﺎﻴﻳرRTL 8106E (A58ML), REALTEK
10 / 100 ﺖﻳﺎﺑﺎﺠﻴﻣ / ﻒﺼﻨﻟا ، ﻲﺋﺎﻘﻼﺗ ﺪﻳﺪﺤﺗ ، ﺔﻴﻧﺎﺜﻟا /ﺔﺟودﺰﻤﻟا ىﻮﺼﻘﻟا ةرﺪﻘﻟا
ﻴﻣﺮﺘﻟاﻲﺗﻮﺼﻟا ﺰ
ALC662
5.1ﺔﻗﺪﻟا ﺔﻴﻟﺎﻋ تاﻮﻨﻗ
مﺎﻋ ﻞﺴﻼﺴﺘﻣ ﻞﻗﺎﻧ
USB
ىد مإ ﻪﻳ AMD A58/A55 FCH
ﺬﻓﺎﻨﻣ 8 xمﺎﻋ ﻞﺴﻼﺴﺘﻣ ﻞﻗﺎﻧ USB 2.0 )4 ﺔﻴﻔﻼﺨﻟا جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا ﻲﻓ و 4 ﻲﻼﺧاﺪﻟا عزﻮﻤﻟا لﻼﺧ ﻦﻣ(
ﻊﺳﻮﺘﻟا تﺎﺤﺘﻓ
1x ﺔﻴﻓﺎﺿﻹا تﺎﻘﺤﻼﻤﻟا ﺬﻔﻨﻣ ﺔﺤﺘﻓ PCIe x1
1 xﺔﺤﺘﻓ ﻹا تﺎﻘﺤﻼﻤﻟا ﺬﻔﻨﻣﺔﻴﻓﺎﺿ PCIe 16 x3.0
جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا
ﺔﻴﻔﻼﺨﻟا
1 x PS/2ةرﺎﻔﻟا
x 1 PS/2 تﻮﻴﺒﻤﻜﻼﻟ ﺢﻴﺗﺎﻔﻤﻟا ﺔﺣﻮﻟ
دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ 1 x ﻲﺋﺮﻤﻟا ضﺮﻌﻟا ﺔﻣﻮﻈﻨﻣ VGA
دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ 1 x ﺔﻴﻤﻗر ﺔﻴﺋﺮﻣ ﺔﻬﺟاو (A58MD) DVI
دﺪﻋ ﻞﻴﺻﻮﺘﻟ ﺔﺤﺘﻓ 1 x ﺔﻴﻼﺤﻤﻟا ﺔﻜﺒﺸﻟا LAN
دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ 4 x ﺴﺘﻣ ﻞﻗﺎﻧمﺎﻋ ﻞﺴﻼ USB 2.0
دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ 3 x تﻮﺼﻼﻟ كﺎﺟ
A58MD/A58MG/A58ML
31
تﺎﻔﺻاﻮﻤﻟا
جرﺎﺨﻤﻷاو ﻞﺧاﺪﻤﻷا
ﺔﻴﻠﺧاﺪﻷا
ﺔﻠﺻو4 x SATA 3 ﺖﻳﺎﺑﺎﺠﻴﺟ /ﺔﻴﻧﺎﺜﻷا
عزﻮﻣ2x مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧUSB 2.0 ) مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ ﻦﻴﺘﺤﺘﻓ ﻞﻤﺤﺘﻳ عزﻮﻣ ﻞآUSB 2.0(
ﺔﻗﺎﻄﻠﻷ ﺔﻠﺻﻮﻣ1 x 4ﺲﻴﺑﺎﺑد
ﺔﻗﺎﻄﻠﻷ ﺔﻠﺻو1x 24سﻮﺑد
ﺔﻠﺻو1 xﻳﺮﺒﺗ ﺔﺣوﺮﻣ ﺔﻳﺰآﺮﻤﻷا ﺔﺠﻷﺎﻌﻤﻷا ةﺪﺣو ﺪ
ﺔﻠﺻو1xﺔﻣﻮﻈﻨﻤﻷا ﺪﻳﺮﺒﺗ حواﺮﻣ
عزﻮﻣ1 xﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻷا
عزﻮﻣ1xﻲﻣﺎﻣﻷا تﻮﺼﻷا
عزﻮﻣ1xﺮﺷﺎﺒﻣ سﻮﻤﻴﺳ
عزﻮﻣ1xﺔﻴﻠﺴﻠﺴﺗ ﺔﺤﺘﻓ
عزﻮﻣ 1x ﻞﻜﻴﻬﻟا ﺲﻴﺋر ﻞﺻﻮﻣ
ﻞﻜﺸﻷا ﻞﻣﺎﻋ ﺔﻣﺪﻘﺘﻤﻷا ﺎﻴﺟﻮﻷﻮﻨﻜﺘﻷا دﺪﻣ ﻞﻜﺷ ﻞﻣﺎﻋmicroATX ،218 x ﻢﻣ174 ﻢﻣ
ﻞﻴﻐﺸﺘﻷا ﺔﻤﻈﻧأﺔﻣﻮﻋﺪﻤﻷا
ﻲﺑ ﺲآإ زوﺪﻨﻳوwindows xp / زوﺪﻨﻳو7 / زوﺪﻨﻳو8 / زوﺪﻨﻳو8.1
رﺎﺘﺳﻮﻴﺑBIOSTARرﺎﻈﻧأ نوﺪﺑ وأ وأ ﻊﻣ ﻞﻴﻐﺸﺗ مﺎﻈﻧ يﻷ ﻢﻋﺪﻷا ﺔﻷزأ ﺔﻓﺎﺿإ ﻖﺤﺑ ﻆﻔﺘﺤﺗ .
Motherboard Manual
32
French
Spécifications
Support Unité
Centrale
Interface de connexion FM2+/FM2 pour série A AMD
Enveloppe thermique Unité Centrale maximum : 100Watt
* Veuillez vous reporter à www.biostar.com.tw pour la liste des supports modèles
d'Unité Centrale.
Jeu de puces AMD A58/A55 FCH
Mémoire
Supporte mémoire DDR3 double canal 800/ 1066/ 1333/ 1600/ 1866/ 2133/
2400(OC)/ 2600(OC)
Banc de mémoire 2 x DDR3 DIMM, Supporte max. jusqu’à une mémoire de 32 GB
Chaque module DIMM supporte module DDR3 non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB
* Veuillez vous reporter à www.biostar.com.tw pour la liste des soutien de la
mémoire.
Stockage
AMD A58/A55 FCH
Connecteur 4 x SATA 3Gb/s
Supporte système RAID 0,1,10 & AHCI
Réseau local
Realtek RTL 8111G (A58MD, A58MG)
10/ 100/ 1000 Mb/s auto négociation, capacité bidirectionnelle à l'alternat /
bidirectionnelle simultanée
Realtek RTL 8106E (A58ML)
10/ 100 Mb/s auto négociation, capacité bidirectionnelle à l'alternat / bidirectionnelle
simultanée
Codec audio
ALC662
Canaux 5.1, écoute audio de haute définition
USB
AMD A58/A55 FCH
Port 8x USB 2.0 (4 sur les I/O arrières et 4 en interne)
Connecteur
d’extension
1x PCIe x1 Fente
1x PCIe 3.0 x16 Fente
I/O arrirèes
1x PS/2 Clavier
1x PS/2 Souris
1x Port VGA
1x Port DVI (A58MD)
1x port LAN
4x Port USB 2.0
3x entrées audio
A58MD/A58MG/A58ML
33
Spécifications
I/O en interne
4x Connecteur SATA 3.0Gb/s
2x embases USB 2.0 (chaque embase supporte 2 Ports USB 2.0)
1x 4-Broche de carte
1x 24-Broche de carte
1x Connecteur ventilateur unité centrale
1x Connecteur ventilateur système
1x Fiche panneau avant
1x Fiche audio avant
1x Fiche mémoire CMOS vide
1x Embase port série
1x Connecteur Audio du panneau avant
Facteur
d'encombrement Facteur d'encombrement microATX, 218 mm x 174 mm
Support SE
Windows XP / 7 / 8 / 8.1
Biostar se réserve le droit d’ajouter ou d'enlever le support pour toute SE avec ou
sans préavis.
Motherboard Manual
34
German
Spezifikationen
CPU-Unterstützung
Anschluss-FM2+/FM2 für AMD A-Serie
Maximale CPU TDP (Thermal Design Power): 100 Watt
* Bitte konsultieren Sie www.biostar.com.tw für CPU-Unterstützungsliste
Chipset AMD A58/A55 FCH
Festplattenspeicher
Unterstützt zweikanaliges DDR3 2133/ 2400(OC)/ 800/ 1066/ 1333/ 1600/ 1866/
2600(OC)
2 x DDR3 DIMM-SpeicherSlot, Max. Uterstützung bis zu 32 GB-Speicher
Jedes DIMM unterstützt nicht-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3-Module
* Bitte konsultieren Sie www.biostar.com.tw für für Speicherunterstützung Liste.
Arbeitsspeicher
AMD A58/A55 FCH:
4x SATA 3Gb-Verbindung
Unterstützt RAID 0,1,10 & AHCI
LAN
Realtek RTL 8111G (A58MD, A58MG)
10/ 100/ 1000 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig
Realtek RTL 8106E (A58ML)
10/ 100/ 1000 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig
Audio-Codec
ALC662
5.1 Kanäle, HD-Audio
USB
AMD A58/A55 FCH:
8x USB 2.0-Port (4 hintere I/Os und 4 via interne Header)
Erweiterungsanschl
üsse
1x PCIe x1-Slot
1x PCIe 3.0 x16-Slot
Hintere I/Os
1x PS/2-Maus
1x PS/2-Keyboard
1x VGA-Port
1x DVI-Port (A58MD)
1x LAN-Port
4x USB 2.0-Port
3x Audio Jack
A58MD/A58MG/A58ML
35
Spezifikationen
Interne I/Os
4x SATA 3.0Gb/s-Verbinung
2x USB 2.0-Header (jeder Header unterstützt 2 USB 2.0-Ports)
1x 4-Pin-Stromverbindung
1x 24-Pin-Stromverbindung
1x CPU-Ventilatorverbindung
1x System-Ventilatorverbindung
1x Header für Frontpanel
1x Header für Frontaudio
1x Header für klares CMOS
1x Serieller Port-Header
1x Chassis Lautsprecher-Header
Formfaktor microATX Formfaktor, 218 mm x 174 mm
OS-Unterstützung
Windows XP / 7 / 8 / 8.1
Biostar reserves the right to add or remove support for any OS with or without notice.
Produktspecifikationer
| Varumärke: | Biostar |
| Kategori: | moderkort |
| Modell: | A58MD 6.x |
Behöver du hjälp?
Om du behöver hjälp med Biostar A58MD 6.x ställ en fråga nedan och andra användare kommer att svara dig
moderkort Biostar Manualer
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
moderkort Manualer
- moderkort Asus
- moderkort Sharkoon
- moderkort Gigabyte
- moderkort Asrock
- moderkort Supermicro
- moderkort Evga
- moderkort Intel
- moderkort MSI
- moderkort ECS
- moderkort NZXT
- moderkort Foxconn
- moderkort Advantech
- moderkort Elitegroup
- moderkort EPoX
Nyaste moderkort Manualer
25 Mars 2025
10 Mars 2025
12 Februari 2025
12 Februari 2025
12 Februari 2025
12 Februari 2025
12 Februari 2025
12 Februari 2025
12 Februari 2025