Blaupunkt CO-S1 Bruksanvisning

Läs nedan 📖 manual på svenska för Blaupunkt CO-S1 (2 sidor) i kategorin övervakningskamera. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
Wireless Carbon Monoxide Detector (CO-S1)
P
Pa
ar
rt
ts
s
D
De
es
sc
cr
ri
ip
pt
ti
io
on
n
1. Dual Color LED Indicator (Amber & Red)
2. Learn/Test Button
Press the button to transmit a learn/test code or silence the alarm
P
Pa
ac
ck
ka
ag
ge
e
C
Co
on
nt
te
en
nt
t
1 x CO Detector
1 x Mounting Bracket
2 x wall plugs and screws
3 x AA 1.5V alkaline batteries
Put the Control Panel into learning mode, then press the Learn
button to transmit learn code. Refer to Control Panel manual to
complete the learning process.
MMoouunnttiinngg
Use the mounting bracket included in the package to mount the
CO detector on the wall.
1. Use the two holes on the mounting bracket as template, drill
two holes on the wall.
2. Insert wall plug if fixing into plaster or brick
3. Screw the bracket onto the wall.
4. Hook the CO detector onto the mounting bracket.
C
Ca
ar
rb
bo
on
n
M
Mo
on
no
ox
xi
id
de
e
D
De
et
te
ec
ct
ti
io
on
n
Upon CO detection, the CO Detector will raise alarm with its
built-in siren and send alarm signal to Control Panel in different
time length according to the CO concentration level detected.
Please see following table for reference.
Once the CO Detector has activated the alarm, it will continue to
resend the alarm signal every 10 minutes until the CO
concentration level drops below 30 ppm. The CO Detector will
then send a restoration signal and stop the alarm. You can also
press the learn/test button to silence the alarm manually. The CO
Detector will then enter Alarm Silence mode.
Alarm Silence
When the alarm is activated, pressing the learn/test button will
put the CO Detector into Alarm Silence mode for 10 minutes.
During this period, the built-in siren will be silenced and the
Amber LED will flash once per second.
After the 10-minute period is over, the CO Detector will check the
CO concentration again. If the CO concentration is still over
alarm threshold, the CO Detector will sound the alarm and
transmit alarm signal again. If not, it returns to normal operation.
B
Ba
at
tt
te
er
ry
y
The CO detector uses three AA 1.5V alkaline batteries as its
power source. It features low battery detection function to notify
the Control Panel when battery voltage is low.
Follow the procedure below to change the batteries.
1. Loosen the screw on the back to open battery compartment
cover.
2. Remove the old batteries.
3. Press the learn/test button several times to fully discharge.
4. Insert the new batteries observing correct polarity. The CO
detector will sound 2 short beeps, RED LED will flash once
5. Replace the battery cover and tighten the screw.
L
LE
ED
D
I
In
nd
di
ic
ca
at
to
or
r
Off Normal Operation
Amber LED flashes
every 30 seconds
Low Battery
Amber LED flashes
quickly
CO Sensor fault
Red LED flash CO Detector is alarming
Red LED on CO Detector is transmitting signal
E
En
nv
vi
ir
ro
on
nm
me
en
nt
ta
al
l
C
Co
on
nd
di
it
ti
io
on
n
-10°C to 40°C, relative humidity 85% non-condensing.
R
Ra
ad
di
io
o
433 MHz
CO concentration
level
Time taken before
alarming
30 ppm None
50 ppm 60~90 minutes
100 ppm 10~40 minutes
300 ppm Under 3 minutes
L
Le
ea
ar
rn
ni
in
ng
g
O
Op
pe
er
ra
at
ti
io
on
n
S
Sp
pe
ec
ci
if
fi
ic
ca
at
ti
io
on
n
1
2
I
In
ns
st
ta
al
ll
la
at
ti
io
on
n
Mounting
Holes
Mounting Bracket
F
FC
CC
C
S
St
ta
at
te
em
me
en
nt
t
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
F
FC
CC
C
C
Ca
au
ut
ti
io
on
n:
:
To assure continued compliance, any changes or modifications
not expressly approved by the party responsible for compliance
may void the user's authority to operate this equipment. (Example
- use only shielded interface cables when connecting to computer
or peripheral devices).

Produktspecifikationer

Varumärke: Blaupunkt
Kategori: övervakningskamera
Modell: CO-S1
Enhetsplacering: Vrijstaand
Färg på produkten: Wit
Dörrgångjärn: Links
Inbyggd display: Ja
Vikt: 66000 g
Bredd: 595 mm
Djup: 720.5 mm
Höjd: 1853 mm
Ljudnivå: 35 dB
Energie-efficiëntieklasse: F
Årlig-energiförbrukning: 295 kWu
Förpackningens vikt: 69000 g
Förpackningens bredd: 637 mm
Djuppackning: 740 mm
Förpackningshöjd: 1935 mm
Frys nettokapacitet: 114 l
Fryskapacitet: 8 kg/24u
Dörröppningsriktning utbytbar: Ja
Kylskåpets nettokapacitet: 230 l
Kylskåp invändig belysning: Ja
Typ av lampa: LED
Multi-luftvägssystem (kylskåp): Ja
Antal hyllor i kylskåp: 4
Antal-grönsakslådor: 1
Frysläge: Onder
Retentionstid vid strömavbrott: 9 uur
Snabbfrysfunktion: Ja
Antal fryshyllor: 3
antal stjärnor: 4*
Total nettokapacitet: 344 l
Kylskåpsdörrfickor: 3
Till fackområdet: Nee
Larm för öppen dörr: Ja
Kylmedium: R600a
Lägsta drifttemperatur: 10 °C
Maximal temperatur (drift): 43 °C
Klimaatklasse: SN-T
Automatisk avfrostning (frys): Nee
Bulleremissionsklass: B
Inverterteknik: Ja
Plats för visning: Binnenin
Kylsystem: Geventileerd
Djup utan handtag: 658 mm
Bredd med dörren öppen: 595 mm
Energieffektivitetsskala: A tot G
Infällda handtag: Ja
Iskubshållare: Ja

Behöver du hjälp?

Om du behöver hjälp med Blaupunkt CO-S1 ställ en fråga nedan och andra användare kommer att svara dig




övervakningskamera Blaupunkt Manualer

övervakningskamera Manualer

Nyaste övervakningskamera Manualer