Bosch FlexiDome micro 1000 Bruksanvisning

Bosch övervakningskamera FlexiDome micro 1000

Läs nedan 📖 manual på svenska för Bosch FlexiDome micro 1000 (4 sidor) i kategorin övervakningskamera. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

1 2 3 4

Front

T4 (Ø4 mm)

Ø 6 mm

Ø24 mm

BNC

female

75 Ohm

CVBS

1 Vpp RED = +

not included

12 VDC

0.1 A min.

Class 2

400 series

Pan

360°

Tilt 60°

Click

Set

1 Safety

1.1 Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous

situation such as "Dangerous Voltage" inside the product.

If not avoided, this will result in an electrical shock, serious

bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily

injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of

damage to the unit.

CAUTION!

The Low Voltage power supply unit must comply with EN60950

/ UL60065. The power supply must be a SELV-LPS unit or a

SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power

Source) and output rated 12 VDC, 0.1 A minimum.

CAUTION!

Installation should only be performed by qualiﬁed service

personnel in accordance with the National Electrical Code

NEC800 (CEC Section 60) or applicable local codes.

1.2 Important safety instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Install in accordance with the manufacturer's instructions.

8. Do not install unit near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

10. Only use attachments/accessories speciﬁed by the

manufacturer.

11. Unplug this apparatus during lightning storms or when

unused for long periods of time.

12. Refer all servicing to service personnel. Servicing is

required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

1.3 FCC & ICES compliance

FCC & ICES Information

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

– reorient or relocate the receiving antenna;

– increase the separation between the equipment and

receiver;

– connect the equipment into an outlet on a circuit different

from that to which the receiver is connected;

– consult the dealer or an experienced radio/TV technician

for help.

Intentional or unintentional modiﬁcations, not expressly

approved by the party responsible for compliance, shall not be

made. Any such modiﬁcations could void the user's authority to

operate the equipment. If necessary, the user should consult

the dealer or an experienced radio/television technician for

corrective action.

1.4 Bosch notices

Optical elements

Optical elements are sensitive and should be protected at all

times. Do not allow objects to come into contact with glass

surfaces and do not touch optical elements with your ﬁngers.

This manual is the intellectual property of Bosch Security

Systems and is protected by copyright.

Trademarks

All hardware and software product names used in this

document are likely to be registered trademarks and must be

treated accordingly.

Note

Bosch Security Systems accepts no liability for damage

resulting directly or indirectly from faults, incompleteness or

discrepancies between the user guide and the product

described.

More information

For more information please contact the nearest Bosch Security

Systems location or visit www.boschsecurity.com

Disposal - Your Bosch product was developed and

manufactured with high-quality material and components that

can be recycled and reused. This symbol means that

electronic and electrical appliances, which have reached the

end of their working life, must be collected and disposed of

separately from household waste material. Separate collecting

systems are usually in place for disused electronic and

electrical products. Please dispose of these units at an

environmentally compatible recycling facility, per European

Directive 2002/96/EC

FLEXIDOME micro 1000 - Quick Install

AM18-Q0636

1/2

Analog Camera Menus Setup menu | en 1

1 Setup menu

Press straight down on the button of the control pad to access the SETUP

menu.

– Move the button up or down to move the cursor through the menus.

– Move the button to the right or left to change values.

– When the symbol is shown, press straight down on the button to

select an item or open a submenu.

Navigation items at the bottom of the screen

– To move to the continuation of a menu, select NEXT.

– To return to the previous menu, select BACK or RETURN.

– To save changes, select SAVE ALL.

– To close the SETUP menu, select EXIT.

Set

Analog Camera Menus Setup menu | en 2

1.1 Main menu

– Camera reset sets all parameters to their factory default values.

SHUTTER/AGC

WHITE BAL

BACKLIGHT

PICT ADJUST

DYN

MOTION DET

PRIVACY

DAY/NIGHT

DNR

CAMERA ID

LANGUAGE

CAMERA RESET

SAVE ALL

Analog Camera Menus Setup menu | en 3

1.1.1 Shutter/AGC (Automatic Gain Control) menu

SHUTTER/AGC AUTO HIGH LUMINANCE

MODE SHUT

BRIGHTNESS 0 - 255

RETURN

LOW LUMINANCE

MODE AGC, OFF

BRIGHTNESS x0.25, x0.50, x0.75, x1.00

RETURN

MANUAL MODE SHUT+AGC

SHUTTER 1/60, 1/120, 1/250, 1/500,

1/1000, /2000, 1/4000, 1/

10000 (NTSC)

1/50, 1/100, 1/250, 1/500,

1/1000, 1/2000, 1/4000, 1/

10000 (PAL)

AGC 6.00, 12.00, 18.00, 24.00,

30.00, 36.00, 42.00, 44.80

RETURN

Analog Camera Menus Setup menu | en 4

1.1.2 White balance menu

– ATW (Auto Tracking White balance: 2,500 K to 8,500 K) and PUSH (Full

pull-in: 1,800 K to 10,500 K) continuously analyze color temperature.

– Use ANTI CR (Anti Color Rolling) when certain types of fluorescent light

cause the picture to periodically change color.

– Use PUSH LOCK with a reference white object filling the screen.

WHITE BAL ATW SPEED 0 - 255

DELAY CNT 0 - 255

ATW FRAME x0.50, x1.00, x1.50, x2.00

ENVIRONMENT INDOOR, OUTDOOR

RETURN

PUSH

USER1 B-GAIN 0 - 255

R-GAIN 0 - 255

RETURN

USER2 B-GAIN 0 - 255

R-GAIN 0 - 255

RETURN

ANTI CR

MANUAL LEVEL 0 - 255

RETURN

PUSH

LOCK

Analog Camera Menus Setup menu | en 5

1.1.3 Backlight menu

– Use BLC (Back Light Compensation) to see a dark object in front of a

bright background.

– Use HLC (High Light Compensation) to darken highlights and avoid

image wash-out (for example, car headlights).

1.1.4 Picture adjust menu

1.1.5 Dynamic range setting menu

– Use DYN (Dynamic range setting) to improve dynamic range by highlight

compression and contrast enhancement.

BACKLIGHT OFF

BLC

HLC

PICT ADJUST MIRROR ON, OFF

BRIGHTNESS 0 - 255

CONTRAST 0 - 255

SHARPNESS 0 - 255

HUE 0 - 255

GAIN 0- 255

RETURN

DYN OFF

LUMINANCE LOW, MID, HIGH

CONTRAST LOW, MIDLOW, MID,

MIDHIGH, HIGH

RETURN

Analog Camera Menus Setup menu | en 6

1.1.6 Motion detection menu

– The ENABLE function sets the regions/blocks where motion detection

does not work.

– To exit the BLOCK DISP ENABLE function, press straight down on the

set button for a longer time.

1.1.7 Privacy masking menu

– Only 4 areas are available if MONITOR AREA of motion detection is on.

MOTION DET OFF

DETECT SENSE 0 - 127

BLOCK DISP OFF, ON, ENABLE

MONIOTR AREA OFF, ON

AREA SEL 1 - 4

TOP 0 - 244 (NTSC), 288 (PAL)

BOTTOM 0 - 244 (NTSC), 288 (PAL)

LEFT 0 - 474 (NTSC), 468 (PAL)

RIGHT 0 - 474 (NTSC), 468 (PAL)

RETURN

PRIVACY OFF

AREA SEL 1 - 8

TOP 0 - 244 (NTSC), 288 (PAL)

BOTTOM 0 - 244 (NTSC), 288 (PAL)

LEFT 0 - 474 (NTSC), 468 (PAL)

RIGHT 0 - 474 (NTSC), 468 (PAL)

COLOR 1 - 8

TRANSP 0.00, 0.50, 0.75, 1.00

MOSAIC OFF, ON

RETURN

Analog Camera Menus Setup menu | en 7

Area selection for motion or privacy masks

Select area 1, 2, 3 or 4.

–Top: extend or reduce upper limit of the detection area.

–Bottom: extend or reduce bottom limit of the detection area.

–Left: extend or reduce left limit of the detection area.

–Right: extend or reduce right limit of the detection area.

1.1.8 Day/night menu

1.1.9 Digital noise reduction menu

LEFT RIGHT

TOP RIGHT

BOTTOM

reduce extend

DAY/NIGHT AUTO BURST OFF, ON

DELAY CNT 0 - 255

DAY->NIGHT 0 - 255

NIGHT->DAY 0 - 255

RETURN

COLOR

B/W BURST OFF, ON

RETURN

DNR NR MODE OFF, Y

Y LEVEL 0 - 15

RETURN

Analog Camera Menus Setup menu | en 8

1.1.10 Camera identification menu

When ON is selected, a virtual keyboard appears on the screen. Use the

control pad to move to the character you want and select it. Repeat this to

enter the camera ID you desire. You can enter up to 52 characters.

1.1.11 Language menu

CAMERA ID OFF

RETURN

LANGUAGE ENGLISH, JAPANESE, GERMAN, FRENCH, RUSSIAN,

PORTUGUESE, SPANISH, SIMPLIFIED CHINESE

Produktspecifikationer

Varumärke:	Bosch
Kategori:	övervakningskamera
Modell:	FlexiDome micro 1000
Färg på produkten:	Grijs
Bredd:	147 mm
Djup:	42 mm
Höjd:	92 mm
Snäll:	Digitale tafelklok
Vormfaktor:	Rechthoekig
Dagordning:	Ja
Antal batterier/batterier som stöds:	2
Antal per paket:	1 stuk(s)
Väckarklocka:	Ja
Bakgrundsbelysning:	Ja
Termometer:	Ja
Batterier-ingår:	Nee
Batterityp:	AAA Micro LR03
Projektionsfunktion:	Tijd