Bosch GBM9-16 Bruksanvisning

Bosch Sågmaskin GBM9-16

Läs nedan 📖 manual på svenska för Bosch GBM9-16 (36 sidor) i kategorin Sågmaskin. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/36
IMPORTANT: IMPORTANT : IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
For English Version Version française Versión en español
See page 2 Voir page 13 Ver la página 24
Operating/Safety Instructions
Consignes de fonctionnement/sécurité
Instrucciones de funcionamiento y seguridad
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
Call Toll Free for
Consumer Information
& Service Locations
Pour obtenir des informations
et les adresses de nos centres
de service après-vente,
appelez ce numéro gratuit
Llame gratis para
obtener información
para el consumidor y
ubicaciones de servicio
GBM9-16
1619PA9714.qxp_GBM9-16 11/19/15 12:55 PM Page 1
-2-
Work area safety
Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Electrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
us e any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and mat ching outlets will r educe ris k of
electric shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp location
is unavoidable, use a Ground Fault Circuit
Interrupter (GFCI) protected supply. Use of
an GFCI reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and
use comm on sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
General Power Tool Safety Warnings
Safety Symbols
The definitions below describe the level of severity for each signal word. Please read the manual
and pay attention to these symbols.
!
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, will result in minor or moderate injury.
1619PA9714.qxp_GBM9-16 11/19/15 12:55 PM Page 2
-3-
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the
switch is in the off-position before
connecting to power source and / or battery
pack, picking up or ca rrying the tool.
Carrying power tools with your finger on the
switch or energizing power tools that have the
switch on invites accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a
key left attached to a rotating part of the power
tool may result in personal injury.
Do not overreach. Keep proper footing and
balance at all times. This enables better
control of th e power tool i n unexpecte d
situations.
Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in
moving parts.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
Power tool use and care
Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and
safer at the rate for which it was designed.
Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controll ed with the switch is
dangerous and must be repaired.
Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of
parts and any other condition that may
affect the power tool’s operation. If damaged,
have the power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
Use the power tool, accessories and tool
bits etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live"
and could give the operator an electric shock.
Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by hand
or against your body leaves it unstable and
may lead to loss of control.
Secure the material being drilled. Never
hold it in y ou r han d or acros s legs.
Unstable support can cause the drill bit to
bind causing loss of control and injury.
Do not drill, fasten or break into existing
walls or other blind areas where electrical
wiring ma y exist. If this s ituatio n is
unavoidable, disconnect all fuses or circuit
breakers feeding this worksite.
Always wear sa fety goggles or eye
protection when using this tool. Use a
dust mask or respirator for applications
which generate dust.
Position the cord clear of rotating bit. Do
not wrap the cord around your arm or
wrist. If you lose control and have the cord
wrapped around your arm or wrist it may
entrap you and cause injury.
Safety Rules for Drills
1619PA9714.qxp_GBM9-16 11/19/15 12:55 PM Page 3

Produktspecifikationer

Varumärke: Bosch
Kategori: Sågmaskin
Modell: GBM9-16

Behöver du hjälp?

Om du behöver hjälp med Bosch GBM9-16 ställ en fråga nedan och andra användare kommer att svara dig


Sågmaskin Bosch Manualer

Bosch

Bosch GKS 18V-57-2 L Professional Bruksanvisning

23 September 2024
Bosch

Bosch GST 183-LI Professional Bruksanvisning

22 September 2024
Bosch

Bosch PFZ 700 PE Bruksanvisning

21 September 2024
Bosch

Bosch GST 65 E Professional Bruksanvisning

16 September 2024
Bosch

Bosch GDC 140 Professional Bruksanvisning

16 September 2024
Bosch

Bosch GST 680 Professional Bruksanvisning

16 September 2024
Bosch

Bosch PKS 46 Bruksanvisning

15 September 2024
Bosch

Bosch PKS 18 LI Bruksanvisning

6 September 2024
Bosch

Bosch PS60 Bruksanvisning

15 Augusti 2024
Bosch

Bosch GTA500 Bruksanvisning

7 Augusti 2024

Sågmaskin Manualer

Nyaste Sågmaskin Manualer

Hikoki

Hikoki C 6BU3 Bruksanvisning

27 Oktober 2024
Dedra

Dedra DED7060 Bruksanvisning

27 Oktober 2024
Einhell

Einhell KGS 190 Bruksanvisning

27 Oktober 2024
Sun Joe

Sun Joe SWJ599E Bruksanvisning

27 Oktober 2024
McCulloch

McCulloch CSE1935S Bruksanvisning

27 Oktober 2024
Hikoki

Hikoki C10FSB Bruksanvisning

27 Oktober 2024
Metabo

Metabo STA 18 LTX 150 BL Bruksanvisning

26 Oktober 2024
Craftsman

Craftsman 917.377662 Bruksanvisning

26 Oktober 2024
Maruyama

Maruyama MCV51 Bruksanvisning

26 Oktober 2024
Powerplus

Powerplus POWX53300T Bruksanvisning

22 Oktober 2024