Boss AD-10 Bruksanvisning

Boss Gitarrförstärkare AD-10

Läs nedan 📖 manual på svenska för Boss AD-10 (14 sidor) i kategorin Gitarrförstärkare. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/14

Owner’s Manual

The AD-10 is designed for the acoustic guitarist who performs live; in a single unit, it combines a preamp, eects, looper, and

direct box.

Contents

Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Connecting the Equipment . . . . . . . . . . . . . . . . . . . . 2

Connecting a Footswitch or an Expression Pedal . . . . 3

Turning On/O the Power . . . . . . . . . . . . . . . . . . . . . 3

Input Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Adjusting the Input Sensitivity . . . . . . . . . . . . . . . 4

Switching Between GUITAR IN 1/2 and

Adjusting the Balance . . . . . . . . . . . . . . . . . . . . . . 4

Tuning the Guitar (Tuner) . . . . . . . . . . . . . . . . . . . . . 4

Manual/Memory Mode . . . . . . . . . . . . . . . . . . . . . . 5

Manual Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Memory Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Saving a Memory . . . . . . . . . . . . . . . . . . . . . . . . . 5

Initializing Memory Settings . . . . . . . . . . . . . . . . . 5

Editing the Eects . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

EQ (Equalizer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

BOOST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

FX LOOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

ANTI-FEEDBACK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

ACOUSTIC RESONANCE . . . . . . . . . . . . . . . . . . . . . . . 7

COMP (Compressor) . . . . . . . . . . . . . . . . . . . . . . . . . 7

DELAY/CHORUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

AMBIENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Sub-Parameter Settings . . . . . . . . . . . . . . . . . . . . . . . 8

Looper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Advanced Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Output Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Ambience Output Settings . . . . . . . . . . . . . . . . . . 10

Stomp Pedal Setting . . . . . . . . . . . . . . . . . . . . . . . . . 11

System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Making Independent EQ Settings for GUITAR

IN 1 and 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Assigning the Functions of the Pedals. . . . . . . . . . 12

Other Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Restoring the Factory Settings (Factory Reset) . . . . . . 13

Appendices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . 14

USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . . 14

IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaet “USING THE UNIT SAFELY” and the Owner’s

Manual p. 14)). After reading, keep the document(s) where it will be available for immediate reference.

Getting Ready

Connecting the Equipment

* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.

Rear Panel

USB COMPUTER port

Use a commercially available USB 2.0 cable to connect

this port to your computer so that audio can be sent and

received between the AD-10 and the computer. You can

record the AD-10’s sound into your

computer, or output sound from your

computer via the AD-10’s output jacks.

SEND, RETURN jacks

Connect an external eect device (mono).

Connect the SEND jack to the input of your external eect

device, and connect the output of your external eect

device to the RETURN jack.

LINE OUT (L/PHONES, R/MONO) jacks

Connect these jacks to your guitar amp or headphones.

* Connect your headphones to the L/PHONES jack.

* If using a mono connection, use only the R/MONO jack.

XLR OUT (L, R) jacks

Connect to the PA etc.

* Pin assignment of XLR OUT (L, R) jack.

1 GND 2 HOT

3 COLD

DC IN jack

Connect the included AC adaptor here.

* We recommend that you keep batteries

installed in the unit even though you’ll be

powering it with the AC adaptor. That way,

you’ll be able to continue a performance even

if the cord of the AC adaptor gets accidentally

disconnected from the unit.

GUITAR IN (1, 2) jacks

Connect your guitar.

You can use the two jacks to blend two dierent types of

pickups, or to connect two guitars.

Subsequently attached pickup

Built-in pickup SEND0INPUT

RETURN1OUTPUT

Getting Ready

Turning On/O the Power

Before you make connections, make sure that the input gain or volume of your mixer or amplier is turned down.

By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

* Before turning the unit on/o, always be sure to turn the volume down. Even with the volume turned down, you might hear

some sound when switching the unit on/o. However, this is normal and does not indicate a malfunction.

* When the batteries run low, the display indicates “

Bt” When this occurs, install fresh batteries.

Connecting a Footswitch or an Expression Pedal

If you connect a footswitch (FS-5U, FS-6, FS-7: sold separately) or expression pedal (FV-500H, FV-500L, EV-30, Roland EV-5: sold separately)

to the CTL1,2/EXP jack, you'll be able to assign a variety of functions to it. “Assigning the Functions of the Pedals” (p. 12)

* Use only the specied expression pedal. By connecting any other expression pedals, you risk causing malfunction and/or

damage to the unit.

FS-7

FS-6 EV-30, EV-5FS-5U

FS-5U

1/4” phone type

Stereo 1/4” phone type

1/4” phone type x 2

Stereo 1/4” phone type

Stereo 1/4” phone

Produktspecifikationer

Varumärke:	Boss
Kategori:	Gitarrförstärkare
Modell:	AD-10

Behöver du hjälp?

Om du behöver hjälp med Boss AD-10 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Gitarrförstärkare Boss Manualer

Boss KATANA HEAD GEN 3 Bruksanvisning

23 September 2024

Boss KATANA-100 GEN 3 Bruksanvisning

23 September 2024

Boss KATANA ARTIST HEAD GEN 3 Bruksanvisning

23 September 2024

Boss KATANA-50 EX GEN 3 Bruksanvisning

23 September 2024

Boss KATANA-50 GEN 3 Bruksanvisning

23 September 2024

Boss KATANA-100/212 GEN 3 Bruksanvisning

23 September 2024

Boss KATANA:GO Bruksanvisning

21 September 2024

Boss Katana 100 MKII Bruksanvisning

20 September 2024

Boss CUBE-10GX Bruksanvisning

20 September 2024

Boss AD-10 Bruksanvisning

3 September 2024

Gitarrförstärkare Manualer

Nyaste Gitarrförstärkare Manualer

Blackstar CabRig Bruksanvisning

21 Oktober 2024

Blackstar ID:CORE Stereo 10 V4 Bruksanvisning

21 Oktober 2024

Fender Pano Verb Amp Bruksanvisning

3 Oktober 2024

Fender Champion II 50 Bruksanvisning

3 Oktober 2024

Fender Champion II 100 Bruksanvisning

3 Oktober 2024

Fender Champion II 25 Bruksanvisning

3 Oktober 2024

Fender Mustang Micro Plus Bruksanvisning

3 Oktober 2024

Peavey Classic 20 Bruksanvisning

25 September 2024

Roland BluesCube BC-CAB410 Bruksanvisning

25 September 2024

SPL 1160 Bruksanvisning

24 September 2024