Boss ATV28B Bruksanvisning

Boss högtalare ATV28B

Läs nedan 📖 manual på svenska för Boss ATV28B (2 sidor) i kategorin högtalare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

FCC COMPLIANCE STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause

undesired operation of this device.

This transmitter must not be co-located or operated in conjunction with any other

antenna or transmitter. The Bluetooth antenna cannot be removed (or replaced) by

user. This equipment complies with FCC/ IC radiation exposure limits set forth for

an uncontrolled environment and meets the FCC radio frequency (RF) Exposure

Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that it deemed to comply without

maximum permissive exposure evaluation (MPE). But it is desirable that it should

be installed and operated keeping the radiator at least 20 cm or more away from

person’s body (excluding extremities: hands, wrists, feet and ankles). Alteration

or modications carried out without appropriate authorization may invalidate the

user’s right to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de-

signed to provide reasonable protection against harmful interference in a residen-

tial installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guar-

antee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

□ Relocate or reorient the receiving antenna.

□ Increase the separation between the equipment and receiver.

□ Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

□ Consult the dealer or an experienced radio/TV technician for help.

THIS PACKAGE CONTAINS

1 - ATV28B All-Terrain Speaker System

1 - Bluetooth Multi-Function Controller

1 - Handlebar Mounting Kit

1 - Quick Connect Power Extension Adaptor

4 - Hi-strength Nylon Mounting Straps

1 - User Manual Quick Start Guide / Poster

1 - Warranty Card

USER MANUAL

QUICK START GUIDE

Thank you for purchasing this

ATV28B All-Terrain Sound System

Please read through these instructions carefully so you will know

how to operate your model properly.

After you have nished reading the instructions, keep this document

in a safe place for future reference.

INFORMATION TO THE USER

The Bluetooth® word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks is under license.

Other trademarks and trade names are those of their respective owners.

CAUTION!!

ADJUSTMENT OR ALTERATIONS OF THIS DEVICE MAY RESULT

IN HAZARDOUS RADIATION EXPOSURE.

GETTING TO KNOW YOUR

ATV28B MULTIFUNCTION CONTROLLER (MFC)

BEFORE YOU START

IMPORTANT SAFETY PRECAUTIONS

■ Do not operate mobile equipment while driving a motorized vehicle – safe driving and

safety consideration of others should always be your highest priority.

■ In the event you should notice smoke, strange noises or odor from this product, or any

other abnormal signs, immediately turn o the power and consult your dealer or the nearest

authorized BOSS AUDIO Service Center. Using this product in this condition may result in

permanent damage to the system.

■ Set your volume control at a low setting, then slowly increase the sound until you can

hear it comfortably without distortion, or ear discomfort.

■ BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

- Do not turn up the volume so high that you can’t hear what’s around you.

- Use caution or temporarily discontinue use in potentially hazardous situations.

INSTALLATION PRECAUTIONS

WARNING - Always consult a professional installer

■ Do not attempt to install or service this product by yourself. Installation or servicing of this

product by persons without professional training and experience in electronic equipment

and motorized vehicle accessories may be dangerous and could expose you to the risk of

electric shock, injury or other hazards

■ Refer any repairs to a qualied BOSS AUDIO SYSTEMS Service Center

■ The ATV28B can be powered from a vehicles cigarette lighter / auxiliary power port, or

hard wired directly to the battery through an optional relay / accessory switch

■ When wiring directly to the vehicles battery, be sure to disconnect the batteries negative

terminal wire before starting any wiring procedures, it is suggested that an

optional fuse and fuse holder (not included) with minimum rating of be in line with 20 Amps

the positive battery terminal

■ The ground cable length should not exceed 18-inches (See wiring diagram)

■ The ATV28B has a weather resistant design, it should not be submerged in or

under water under any circumstances

■ Use only the installation parts provided with the ATV28B

GETTING STARTED

567

MFC - MULTIFUNCTION CONTROLLER

BLUETOOTH INDICATOR LED - BLUE COLOR

POWER INDICATOR LED - RED COLOR

3.5mm AUX-INPUT

PREVIOUS TRACK / Press and hold for VOL -

PLAY/PAUSE / Press and hold for POWER ON

NEXT TRACK / Press and hold for VOL +

CAUTION!! Using other mounting methods may void this warranty

PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION

1) Power on the ATV28B Play/Pauseby pressing and holding down the multifunction

button for 3 seconds, the 2blue and 3red LEDs will start to alternately ash, signalling

that the ATV28B is now ready for Bluetooth pairing.

NOTE: You have 2 minutes before you must restart this procedure over again.

2) Now that the ATV28B is in pairing mode:

ANDROID users:

a. Go into the of your deviceSettings Menu

b. Enter the Bluetooth Menu

TURN ON Bluetooth SCANc. and press

d. “ATV28B” AVAILABLE DEVICESwill now be displayed under

e. If prompted, enter passcode: “ ”0000

iOS users:

a. Go into the of your deviceSettings Menu iOS

b. Enter the Bluetooth Menu

. TURN ON Bluetoothc

d. “ATV28B” will now be displayed

e. If prompted, enter passcode: “ ”0000

3) If the ATV28B Device List”is not seen, repeat the above steps to refresh the “

4) When the connection is successful, you are now ready to stream music from your favorite

media player to the ATV28B

To avoid battery exhaustion, be sure to occasionally run the

vehicles engine while using this product.

Using this product without running the engine can drain the battery.

BLUETOOTH OPERATION BLUETOOTH OPERATION

RECONNECTION

1) Power on the ATV28B and your last paired device Bluetooth.

2) The unit will now automatically reconnect

3) If your device was previously paired with the ATV28B, but it wasn’t the last paired

device:

a. Ensure no other devices are currently paired

b. Enter the on your device being pairedBluetooth Menu

c. “ATV28B” AVAILABLE DEVICES will display under

d. Choose the “ATV28B” to reconnect

4) If the device is out of range from the ATV28B, it will disconnect automatically:

a. To reconnect once device is back in range, press the Play/Pause

button once

b. The ATV28B will now reconnect to the device

Tips:

MULTIFUNCTION CONTROLLER BLUETOOTH OPERATION

1) Press the PLAY/PAUSE PLAYonce to start playing music or press the button from

your device touch screen

2) To skip songs or advance, press the buttonNEXT TRACK

3) To select the previous song, press the buttonPREVIOUS TRACK

VOLUME CONTROL

4) To raise the volume the button 2 ~ 3 secondsPress and Hold VOL +

5) To lower the volume the Press and Hold button 2 ~ 3 secondsVOL -

MULTIFUNCTION CONTROLLER AUX-IN OPERATION

1) Power on the ATV28B PLAY/PAUSE by pressing and holding down the multifunc-

tion button for 3 seconds

2) Disconnect any paired device by turning oBluetooth Bluetooth in your devices

Settings Menu

3) Connect the integrated 3.5mm cable located on right side of the MFC to your AUX-IN

devices headphone jack

4) Route the wire back to ATV28B, secure your device in a safe posistion

VOLUME CONTROL

5) To raise the volume the button 2 ~ 3 secondsPress and Hold VOL +

6) To lower the volume the Press and Hold button 2 ~ 3 secondsVOL -

STREAMING MUSIC

Make sure your device Bluetooth volume is set at 75% level

before stowing

AUX-INPUT

Make sure your device headphone volume is set at 75% level

before stowing.

ATV28B can play audio from any device that

has a 3.5mm headphone audio jack.

YOUR DEVICE

Tips:

MULTI-FUNCTION CONTROLLER MOUNTING

LEFT or RIGHT

FOR ILLUSTRATION PURPOSES

YOUR VEHICLE MAY VARY

FOR ILLUSTRATION PURPOSES

YOUR VEHICLE MAY VARY

RUBBER

SHIM

INSERT

WASHER

LOCK NUT

ALLEN HEAD

BOLT

LOCK NUT

ALLEN HEAD

BOLT

MULTI-FUNCTION

CONTROLLER

UNIT

SNAP

BRACKET

Z-BRACKET

HANDLEBAR

CLAMP

TOOLS NEEDED:

- 12mm Socket, Wrench or Pliers

- 6mm Allen Wrench

BEFORE INSTALLING THIS PRODUCT

When replacing the fuse, be sure to only use a fuse of the rating specied on

this product. To avoid short-circuiting, cover any disconnected leads with insulating

tape. It is especially important to insulate any unused wires, which if left uncovered

may cause a short circuit. When connecting other devices to this product, refer to

the manual for the product to be connected. The black cable is ground, make sure

to connect the ground wire rst. Ensure that the ground wire is properly connected

to metal parts of the vehicles body frame or direct to the battery if your vehicle

does not have a grounded chassis frame The ground wire of this units power amp

and a second powered system must be connected to the frame separately with

dierent screws. If the screw for the ground wire loosens or falls out, it could result

in re or malfunction.

To avoid potential shorts in the electrical

system, be sure to disconnect the (–) bat-

tery cable before installation. Use this unit

with a 12-Volt battery and negative ground-

ing only. Failure to do so may result in a

re or malfunction.

SPEAKER MOUNTING SUGGESTIONS

BLUETOOTH® ENABLED

ALL-TERRAIN SOUND SYSTEM

ATV28B

USER MANUAL

QUICK START GUIDE

ATV28B

USER MANUAL

BLUETOOTH® ENABLED | ALL-TERRAIN SOUND SYSTEM

PRINTED IN CHINA

VER:1.0 EN

iPod / iPhone are trademarks of Apple Inc. registered in the U.S. and other countries

Android is a trademarks of Google Inc. registered in the U.S. and other countries.

BOSS Audio Systems is not aliated with Apple Inc. or Google Inc.

0815

BOSS Audio Systems

3451 Lunar Court • Oxnard, CA 93030

www.bossaudio.com | 805-751-4853

Tech Support: www.bossaudio.com/technical-support

BLUETOOTH

• Version: 3.0 w/ EDR

• A2DP

• Range: 33ft (10m) Class 2

SPEAKERS

• Dimensions: 6.5”

• Impedance: 4Ω

• Cone Type: PP CARBON + RUBBER SURROUND

• Tweeter Size: 1” PEI SOFT DOME

AMPLIFIER

• Maximum Output Power: 450 Watts

• Input impedance: 10kΩ

• Frequency Response: 45Hz-25kHz

GENERAL

• Operational Power: 14.4VDC (10-16V allowable)

• MAX Current Draw: 13.7A

• Replacement Fuse: 15A AGC TYPE

• Color: Black

• Weight: 14.26lbs / 6.47Kg

• Dimensions cm WxHxD: 72.4 x 20.2 x 29.4

• Dimensions Inches WxHxD: 28.50 x 7.95 x 11.58

SPECIFICATIONS

WIRE DIAGRAM

7.95”

(202mm)

28.50”

(724mm)

11.58”

(294mm

20A

Fuse and fuse holder

(not included)

Chassis

ground

point

BATTERY

Mini-DIN

Connector

Fuse is located inside the power adaptor

Turn counter clockwise to open

Replace with 15A AGC Fuse type only

INSERT

Normally open switch

(not included)

INSERT

OPTIONAL DIRECT BATTERY WIRING CIRCUIT

RED

BLACK

Chassis

ground

point

QUICK RELEASE

POWER ADAPTOR

(INCLUDED)

MFC

POWER ADAPTOR

15A

Ground wire

Metal frame

Recommended 12 ~ 14ga Wire

(not included)

Align arrows

• Storage Temperature: 5oF to 113oF / -15oC to 45oC

• Operation Temperature: 14 oF to 140oF / -10oC to 60oC

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

photocopying, recording, or other electronic or mechanical methods, without the prior written permission of AVA Enterprises Inc.

Route strap

through the hole

and to vehicle

frame

Route strap

around the speaker body to vehicle frame

Route strap

through the hole

and to vehicle

frame

CAUTION!!

Mounting straps should be double checked to be sure they are

pulled tight and secure before each use of the vehicle.

ATV28B-UM-POSTER-STYLE-FINAL-v1.0.indd 2 7/20/2015 1:11:14 PM

Produktspecifikationer

Varumärke:	Boss
Kategori:	högtalare
Modell:	ATV28B
Vikt:	1720 g
Impedans:	4 Ohm
Frekvensomfång:	90 - 22000 Hz
Känslighet:	86 dB
Typ av högtalare:	2-weg
Diameter högtonenhögtalare:	19 mm
Diameter förare i mellanregister:	102 mm
Toppeffekt:	80 W
Tweeter:	Ja
Märkeffekt:	40 W
Separerade komponenter:	Nee
Passiv crossover:	Ja