Boss BHD14 Bruksanvisning

Läs nedan 📖 manual på svenska för Boss BHD14 (4 sidor) i kategorin högtalare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
BHD14
0820
HARLEY DAVIDSON SADDLEBAG SPEAKER KIT
FITS SELECT 2014+ HARLEY DAVIDSON ROAD GLIDE AND
STREET GLIDE MOTORCYCLES
The BOSS Audio Systems BHD14 Saddlebag Speaker kit
allows the addition of 6x9 rear speakers to easily be
installed into your existing factory bag lids. The included
cut out template makes the cutting painless and installation
a breeze. This rear speaker upgrade is designed to work
perfectly with our BHD3F front kit (sold separately). This
BHD14 fits 2014+ Harley Davidson Road Glide and Street
Glide models. Simply plug in to the BHD3F (sold separ-
ately) amplifier for a complete audio upgrade without the
hassle of serious modifications or paint.
B refo e you n begi installation please check that your s myste
con he win : tains t follo g contents
(2) 6”x9” (152x229mm) 2-way speakers
(2) Saddlebag speaker grilles
(2) 6”x9” (152x229mm) bottom speaker protectors
(2) 6”x9” (152x229mm) plastic mounting rings
(2) Red colored templates
(1) Wire cable
(1) Screw bag (4x20mm 8pcs, 4x12mm 10pcs)
(2) Wire clamps
(10) Plastic gaskets for speaker
(12) Nylon wire straps
Dimensions:
9.2”
(234mm)
6.5”
(164mm)
4.8”
(122mm)
6.7”
(169mm)
8.6”
(218mm)
3.5”
(89mm)
3.2”
(82mm)
5.7”
(145mm)
3.5”
(89mm)
3.2”
(82mm)
Mid Bass Driver:
6”x9” (152x229mm)
poly injection cone
rubber surround
Tweeter:
1” (25mm) Silk dome tweeter
Crossover network:
Built-in
Impedance:
4 Ohms
Power Capacity:
150W RMS
Frequency Response:
70Hz - 20kHz
Sensitivity:
93dB (1 watt/1 meter)
Dimensions:
9-1/4” (W) x 6-1/2” (H) x 3-1/2”(D)
(234 (W) x 164 (H) x 89 (D) mm)
Weight (in gift box):
13.23 Ibs (6kg)
BHD14
It has rbeen enginee ed to brin you g
the highes t level of pe fo cer rman .
Its quality will afford o y u years of
listening re.pleasu
Harley Davidson
Saddlebag Speaker Kit
Congratulations on
your purchase of a
POWERSPORTS Speaker System.
Thank you for making your
choice for POWERSPORTS
entertainment!
BHD14
Harley Davidson
Saddlebag Speaker Kit
1. Remove Saddle Bags from motorcycle.
(Note: Inside the bag you will find 2 pins that hold the bag in place. Turn pins to remove bags)
2. Place a soft cover on secure table, then place the Bag on to table to avoid causing any
scratching or damage to the bag.
3. With masking tape, cover the front edge of the bag lid where you will be placing the cutting template.
Installation
BHD14
Harley Davidson
Saddlebag Speaker Kit
4. Test fit the template to make sure you have all painted surfaces covered with masking tape and
that the template can be firmly mounted with no gaps.
5. Place template on bag lid and drill a screw in either one of the two center holes. Before drilling in
the second screw, double check that the template is still in position and has not shifted. After that
has been confirmed, drill the second screw into position. Now your template should be in place
and have no visible gaps between the template and the bag lid.
BHD14
Harley Davidson
Saddlebag Speaker Kit
6. With a 5/16 drill bit begin to drill out the 15 pilot holes on the template.
7. Using a jig saw or rotary drill, begin to cut along the template lines until all cuts have been made.
Use care and go slow to ensure you make accurate cuts.
8. Remove template and masking tape.
9. Carefully sand the newly cut edges so that there is no debris or hanging material left from cutting.
10. If there is not a stock wire hole for wiring in the rear of bag on the side facing the tire, please drill
out a hole using the 5/16 drill. This hole is to be used to run wires out of the bag lids.
11. Take the bottom speaker mounting plate and top speaker grill mounting plate and sandwich the
bag lid so the bottom plate is on the inside of the bag lid and the top grill mounting plate is on the
outer side of bag lid.(Figure A, Page 5)
12. Use the provided 4 screws and secure the two plates together, making them tight so no gaps can
be seen on the outer grill bag lid plate and the bag lid itself.(Figure A, Page 5)

Produktspecifikationer

Varumärke: Boss
Kategori: högtalare
Modell: BHD14

Behöver du hjälp?

Om du behöver hjälp med Boss BHD14 ställ en fråga nedan och andra användare kommer att svara dig




högtalare Boss Manualer

Boss

Boss BOLT Bruksanvisning

17 December 2024
Boss

Boss BEHDIN98 Bruksanvisning

23 September 2024
Boss

Boss MC625BA Bruksanvisning

11 September 2024
Boss

Boss MCBC425BA Bruksanvisning

11 September 2024
Boss

Boss MR52W Bruksanvisning

6 September 2024
Boss

Boss MC475BA Bruksanvisning

6 September 2024
Boss

Boss MC425BA Bruksanvisning

5 September 2024

högtalare Manualer

Nyaste högtalare Manualer