Bowers And Wilkins 300 Series Bruksanvisning

Bowers And Wilkins högtalare 300 Series

Läs nedan 📖 manual på svenska för Bowers And Wilkins 300 Series (12 sidor) i kategorin högtalare. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/12
DM™302 Owner’s manual
300 Series
Figure 1
Figure 2
Figure 3
Figure 4
DM™302
Owner’s manual
English ...............................1
Deutsch.........................................2
Français........................................3
Español.........................................4
Nederlands..................................5
Dansk............................................6
Italiano .........................................7
Português......................................8
>0.5m
>0.5m
>1.5m
≈ ≈
≈
Amplifier
DM™302
1
INTRODUCTION
Thank you for purchasing B&W DM300 Series
speakers.
Since its foundation in 1966, the continuing
philosophy of B&W has been the quest for
perfect sound reproduction. Inspired by the
company’s founder, the late John Bowers, this
quest has entailed not only high investment in
audio technology and innovation but also an
abiding appreciation of music to ensure that the
technology is put to maximum effect.
It is also our policy to make sure the advanced
features pioneered on one product are
incorporated into others we manufacture.
The rear panel of the DM 302 cabinet is™
formed into a wedge pattern similar to the
interior of an anechoic chamber. This greatly
helps to break up the regular internal cabinet
volume that would otherwise encourage
coloration from internal standing waves.
Homogeneous fibre cone bass/midrange
drive units are used for minimum coloration
and maximum definition. The DM 302 also™
features a soft dome tweeter with magnetic
fluid cooling to ensure good definition to the
limits of audibility and maintain dynamics to
high sound levels.
However, no matter how good the speakers
themselves, they must work well into the listening
room and time spent on the installation process
will reap the reward of many hours listening
pleasure. Please read through this manual fully.
It will help you optimise the performance of your
audio system.
B&W distribute to over 50 countries world-wide
and maintain a network of dedicated distributors
who will be able to help should you have any
problems your dealer cannot resolve.
UNPACKING
(figure 1)
•Fold the top carton flaps right back and
invert the carton and contents.
•Lift the carton clear of the contents.
•Remove the inner packing from the product.
We suggest you retain the packaging for
future use.
CONNECTIONS
(figure 2)
All connections should be made with the
equipment turned off.
Connect the positive terminal on the speaker
(marked + and coloured red) to the positive
terminal on the power amplifier and negative
(-, black) to negative (figure 2). Failure to
observe correct polarity will result in poor
sound balance and image focusing.
Always make sure all the terminal caps are
screwed down tight, as otherwise they
may rattle.
When choosing cable, keep the total electrical
impedance (out and back) below the maximum
recommended in the specification. In particular,
the cable to the tweeter should have low
inductance, otherwise the very high frequencies
will be attenuated. Ask your dealer for advice,
as the optimum cable will depend on the length
required.
POSITIONING
(figure 3)
Some experimentation with the position of the
speakers is well worthwhile to optimise the
interaction between them and the listening room.
However, as an initial guide:
Place the speakers on firm stands or bookshelves
that place the tweeters approximately at ear
level.
Place the speakers and the centre of the listening
area approximately at the corners of an
equilateral triangle.
Keep the speakers at least 1.5m (5ft) apart to
maintain left-right stereo separation.
Keep the speaker baffles at least 0.5m (20in)
clear of walls. Having the speakers too close to
walls increases the level of bass relative to the
midrange and may give a boomy quality to the
sound.
NOTE: The DM™302 produces a static
magnetic field that extends outside the cabinet
boundary. As such The DM 302 should not be™
placed within 0.5m (20in) of equipment that
may be affected by such a field, e.g. Cathode
Ray Tubes in TVs and Personal Computers.
FINE TUNING
Before fine tuning the installation, double check
the polarity and security of the connections.
If the level of bass is uneven with frequency, this
is usually due to strong excitation of resonance
modes in the room.
Even small changes in the position of the
speakers within the listening room can have a
profound effect on the perceived sound quality
by altering the excitation of these modes. Try
mounting the speakers along a different wall.
Even moving large pieces of furniture about can
have an effect.
If the general level of bass is too high, try
moving the speakers further away from the walls.
Conversely, if you need more bass, move the
speakers closer to the walls. Space behind the
speakers also improves the impression of
perspective on well recorded material.
If the central image is poor, try moving the
speakers closer together or toeing them in so
they point at or just in front of the listening area
(figure 4).
If the sound is too harsh, increase the amount of
soft furnishing in the room. For example, use
heavier curtains. Conversely reduce the amount
of soft furnishing if the sound is dull and lifeless.
Test for flutter echoes by clapping your hands
and listening for rapid repetitions. These can
smear the sound, but may be reduced by
irregular shaped surfaces such as bookshelves
and large pieces of furniture.
Ensure the speakers are firmly supported.
Speaker stands should be regarded as part of
the speaker and chosen with care. Ask your
dealer for advice on the best stands for your
needs.
AFTERCARE
The vinyl veneers normally only require dusting.
If you wish to use an aerosol cleaner, remove
the grille first by gently pulling it away from the
cabinet. Spray onto the cleaning cloth, not
directly onto the cabinet. The grille fabric may
be cleaned with a normal clothes brush after
removing the grille from the cabinet.
Avoid touching the drive units, especially the
tweeter, as damage may result.

Produktspecifikationer

Varumärke: Bowers And Wilkins
Kategori: högtalare
Modell: 300 Series

Behöver du hjälp?

Om du behöver hjälp med Bowers And Wilkins 300 Series ställ en fråga nedan och andra användare kommer att svara dig


högtalare Bowers And Wilkins Manualer

Bowers And Wilkins

Bowers And Wilkins LCR3 Bruksanvisning

20 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins 800D Bruksanvisning

19 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bruksanvisning

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins Nautilus 803 Bruksanvisning

7 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins Nautilus 800 Bruksanvisning

29 September 2024
Bowers And Wilkins

Bowers And Wilkins DM600 S3 Bruksanvisning

24 September 2024
Bowers And Wilkins

Bowers And Wilkins CCM665 Bruksanvisning

22 September 2024
Bowers And Wilkins

Bowers And Wilkins CT7.3 LCRS Bruksanvisning

21 September 2024
Bowers And Wilkins

Bowers And Wilkins DM 604 Bruksanvisning

20 September 2024
Bowers And Wilkins

Bowers And Wilkins CT8 CC Bruksanvisning

16 September 2024

högtalare Manualer

Nyaste högtalare Manualer

Streetz

Streetz CM717 Bruksanvisning

20 Mars 2025
Streetz

Streetz CM715 Bruksanvisning

20 Mars 2025
Streetz

Streetz CM716 Bruksanvisning

20 Mars 2025
SOUNDBOKS

SOUNDBOKS The Battery Bruksanvisning

20 Mars 2025
ETON

ETON HEX 165 Bruksanvisning

19 Mars 2025
ETON

ETON PRW 50 Bruksanvisning

19 Mars 2025
ETON

ETON PFX 10 Bruksanvisning

19 Mars 2025
ETON

ETON PRA 80 Bruksanvisning

19 Mars 2025
ETON

ETON PFX 16 Bruksanvisning

19 Mars 2025
Manta

Manta SPK12GO Bruksanvisning

19 Mars 2025