Cameo Movo Beam Z 100 Bruksanvisning

Cameo Lättnad Movo Beam Z 100

Läs nedan 📖 manual på svenska för Cameo Movo Beam Z 100 (68 sidor) i kategorin Lättnad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/68
MOVOBEAM ZOOM 100
MOVING HEAD WITH ZOOM AND UNLIMITED PAN & TILT ROTATION
CLMBZ100
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D`UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D‘ USO
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
PREVENTIVE MEASURES 3-4
INTRODUCTION 4
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 5
OPERATION 5-9
DIMMER CURVES 9-10
INSTALLATION AND MOUNTING 10
DMX TECHNOLOGY 10-11
TECHNICAL DATA 11-12
MANUFACTURER'S DECLARATIONS 12
DMX CONTROL 63-66
DEUTSCH
SICHERHEITSHINWEISE 13-14
EINFÜHRUNG 14
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 15
BEDIENUNG 15-19
DIMMERKURVEN 19-20
AUFSTELLUNG UND MONTAGE 20
DMX TECHNIK 20-21
TECHNISCHE DATEN 21-22
HERSTELLERERKLÄRUNGEN 22
DMX STEUERUNG 63-66
FRANCAIS
MESURES PRÉVENTIVES 23-24
INTRODUCTION 24
RACCORDEMENTS, ÉLÉMENTS DE COMMANDE ET
D’AFFICHAGE 25
UTILISATION 25-29
COURBES DE DIMMER 29-30
INSTALLATION ET MONTAGE 30
TECHNOLOGIE DMX 30-31
CARACTÉRISTIQUES TECHNIQUES 31-32
DÉCLARATIONS DU FABRICANT 32
PILOTAGE EN MODE DMX 63-66
ESPAÑOL
MEDIDAS DE SEGURIDAD 33-34
INTRODUCCIÓN 34
CONEXIONES, CONTROLES E INDICADORES 35
FUNCIONAMIENTO 35-39
CURVAS DE ATENUACIÓN 39
INSTALACIÓN Y MONTAJE 40
TECNOLOGÍA DMX 40-41
DATOS TÉCNICOS 41-42
DECLARACIONES DEL FABRICANTE 42
CONTROL DMX 63-66
POLSKI
ŚRODKI OSTROŻNOŚCI 43-44
WPROWADZENIE 44
PRZYŁĄCZA, ELEMENTY OBSŁUGOWE I WSKAŹNIKOWE 45
OBSŁUGA 45-49
KRZYWE ŚCIEMNIANIA 49-50
USTAWIANIE I MONTAŻ 50
TECHNIKA DMX 50-51
DANE TECHNICZNE 51-52
OŚWIADCZENIA PRODUCENTA 52
STEROWANIE DMX 63-66
ITALIANO
MISURE PRECAUZIONALI 53-54
INTRODUZIONE 54
CONNESSIONI, ELEMENTI DI COMANDO E VISUALIZZAZIONE 55
UTILIZZO 55-59
CURVE DIMMER 59-60
INSTALLAZIONE E MONTAGGIO 60
TECNOLOGIA DMX 60-61
DATI TECNICI 61-62
DICHIARAZIONI DEL PRODUTTORE 62
CONTROLLO DMX 63-66
ITALIANOPOLSKIESPAÑOL
FRANCAISDEUTSCHENGLISH
3
DMX
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making
optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW. .COM.CAMEOLIGHT
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and
secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. This appliance is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of water (does not apply
to special outdoor equipment - in this case, observe the special instructions noted below). Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in
anot her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired
by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
23. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
24. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.
25. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
26. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
27. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
28. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
29. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
30. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
31. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
32. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
33. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
34. Please keep a distance of at least 0.5 m to any combustible materials.
35. Power cables to power multiple devices must have a cross-section of at least 1.5 mm². Within the EU, the cables must correspond to
H05VV-F, or similar. Suitable cables are offered by Adam Hall. With these cables, you can connect multiple devices via the power OUT con-
nection to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not
exceed the specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.

Produktspecifikationer

Varumärke: Cameo
Kategori: Lättnad
Modell: Movo Beam Z 100

Behöver du hjälp?

Om du behöver hjälp med Cameo Movo Beam Z 100 ställ en fråga nedan och andra användare kommer att svara dig


Lättnad Cameo Manualer

Cameo

Cameo PIXBAR SMD IP G2 Bruksanvisning

22 September 2024
Cameo

Cameo ZENIT W300 Bruksanvisning

10 September 2024
Cameo

Cameo ZENIT W600 Bruksanvisning

9 September 2024
Cameo

Cameo ZENIT W600 TW Bruksanvisning

9 September 2024
Cameo

Cameo ZENIT Z120 G2 Bruksanvisning

9 September 2024
Cameo

Cameo Q SPOT 15 RGBW Bruksanvisning

7 September 2024
Cameo

Cameo CLSuperfly HP Derby Bruksanvisning

3 September 2024
Cameo

Cameo ThunderWash 600 UV Bruksanvisning

3 September 2024
Cameo

Cameo Control 6 Bruksanvisning

3 September 2024
Cameo

Cameo CLMPARFOOTPLUS Bruksanvisning

2 September 2024

Lättnad Manualer

Nyaste Lättnad Manualer

Ikan

Ikan CHROMA-1F1S Bruksanvisning

20 Mars 2025
BeamZ

BeamZ NEUTRON-ATOM Bruksanvisning

15 Mars 2025
EMOS

EMOS D3ZW01 Bruksanvisning

14 Mars 2025
EMOS

EMOS D3ZC01 Bruksanvisning

14 Mars 2025
Quasar Science

Quasar Science Q-Lion Q10 Bruksanvisning

13 Mars 2025
Osram

Osram LEDriving Cube MX85-WD Bruksanvisning

12 Mars 2025
Rotolight

Rotolight Ultimate VLogging Kit Bruksanvisning

10 Mars 2025
Innoliving

Innoliving INN-807 Bruksanvisning

10 Mars 2025
Rotolight

Rotolight Aeos Location Bruksanvisning

9 Mars 2025
Intellytech

Intellytech LiteCloth Mega-6 Bruksanvisning

26 Februari 2025