Casio 5470 Bruksanvisning

Casio Titta 5470

Läs nedan 📖 manual på svenska för Casio 5470 (26 sidor) i kategorin Titta. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/26

Basic Operations

This section provides an overview of the watch

and explains operations that are common to

all modes.

Important!

●This watch is not a special-purpose

measuring instrument.

Measurement function readings are

intended for general reference only.

●Whenever using the Digital

Compass of this watch for serious

trekking, mountain climbing, or other

activities, be sure to always take

along another compass to confirm

readings. If the readings produced

by the Digital Compass of this watch

are different from those of the other

compass, perform bidirectional

calibration of the Digital Compass to

ensure better accuracy.

ーCompass readings and

calibration will not be possible if

the watch is in the vicinity of a

permanent magnet (magnetic

accessory, etc.), metal objects,

high-voltage wires, aerial wires, or

electrical household appliances

(TV, computer, cellphone, etc.)

lDigital Compass

●The watch’s Altimeter Mode

calculates and displays relative

altitude based on barometric

pressure readings produced by its

pressure sensor. Because of this,

altitude values displayed by the

watch may be different from your

actual elevation and/or sea level

elevation indicated for the area

where you are located. Regular

calibration in accordance with the

local altitude (elevation) indications

is recommended.

lAltitude Measurement

Note

●In this manual, the expression “time

signal” refers to a time calibration

signal. Time signals include time

information.

●Note that the watch illustrations in

this manual are intended for

reference only. The actual watch

may appear somewhat different

than depicted in the illustrations.

General Guide

③① ②

⑥

⑤

④

AHour hand

BSecond hand

CMinute hand

DMode hand

ELCD

FCrown

Indicators

① ② ③ ④ ⑤

AAppears when an alarm is turned on.

BAppears when the hourly time signal is on.

CAppears when the indicated time is

summer time.

DAppears when Barometric Pressure

Change Indications are on.

EShows the barometric pressure

measurement unit.

Navigating Between Modes

Your watch has the modes shown below.

BA BC

Receive Mode

World Time Mode

Alarm Mode

Timer ModeStopwatch Mode

Data Recall Mode

Thermometer Mode

Barometer Mode

Digital Compass ModeAltimeter Mode

Timekeeping Mode

Use the buttons in the illustration above to

navigate between modes.

Important!

●To return to the Timekeeping Mode

from any other mode, hold down the

(B) button for about two seconds.

Operation Guide 5470

Selecting a Timekeeping

Mode Digital Display Format

In the Timekeeping Mode, you can use the

operation below to change the contents of the

digital displays.

Day of the week,

month, day

Hour, minute, second

Barometric pressure

graph

Using the Crown

The watch’s crown is a screw-in (screw lock)

type. To use the crown, you first need to rotate

it towards you (leftwards) to loosen it.

Loosen

Crown

●Pulling Out and Pushing In the Crown

Pull out the crown before performing crown

operations. Do not pull the crown with too

much force.

Normal timekeeping

Pull out

Important!

●To prevent loss of water resistance

and/or damage due to impact, be

sure to screw the crown in by rotating

it away from you as you push it in.

Screw in

●When pushing the crown back in,

take care not to apply too much

force.

●Fast Forward/Fast Reverse

After pulling out the crown, rotating it quickly

in succession in either direction will start a fast

forward or fast reverse operation. While a fast

forward operation is in progress, quickly

rotating the crown in succession again will

increase the speed even further.

●The fast reverse operation speed is fixed

and cannot be changed.

●Stopping Fast Forward/Fast Reverse

Rotate the crown in the direction opposite that

of the ongoing operation or press any button.

Note

●If you do not perform any operation

for about two minutes after pulling

out the crown, crown operations will

automatically become disabled. If

that happens, push the crown back

in and then pull it out again.

●The message [PUSH] will appear on

the display in the cases below. If that

happens, push the crown back in

and then pull it out again.

ーWhen the crown is pulled out while

in a mode that does not support

crown operation

ーWhen you do not perform any

operation for about two minutes

after pulling out the crown

Shifting the Hands

Hand shift moves the hands out of the way for

easy viewing of display info.

1. While holding down (L), press (B).

●All hands will move to 2 o’clock.

2. To return the hands to their normal

timekeeping positions, press (A), (B), (C),

or (D).

Note

●This function can be used in any

mode.

ーHand shift cannot be used while

configuring the city code or the

summer time setting, or when

manually configuring time and

date settings.

●Shifted hands will return to their

normal positions if no button

operation is performed within about

ten seconds after hands are shifted.

●In the modes below, hands that are

blocking a digital display will

automatically move to 4 o’clock or 8

o’clock. The hands will return to their

normal positions after about three

seconds.

ーAltimeter Mode

ーBarometer Mode

ーThermometer Mode

Operation Guide 5470

Switching between 12-hour

and 24-hour Timekeeping

1. Pull out the crown.

The second hand will move to the

currently set city.

Crown

2. Press (B) five times so the current setting

([12H] or [24H]) is flashing on the display.

3. Rotate the crown to select [12H] (12-hour

timekeeping) or [24H] (24-hour

timekeeping).

4. Push the crown back in to complete the

setting operation.

Note

●While 12-hour timekeeping is

selected, the [A] indicator will be

displayed for a.m. times, and [P] will

be displayed for p.m. times.

Solar Charging

What is solar charging?

This watch runs on power supplied from a

rechargeable (secondary) battery that is

charged by a solar panel. The solar panel is

integrated into the face of the watch, and

power is generated whenever the face is

exposed to light.

Charging the Watch

When you are not wearing the watch, put it in

a location where it is exposed to bright light.

While you are wearing the watch, make sure

that its face (solar panel) is not blocked from

the light by the sleeve of your clothing. Power

generation efficiency is reduced even when

the face of the watch is blocked only partially.

NOYES

Important!

●Depending on light intensity and

local conditions, the watch may

become hot to the touch when

exposed to light for charging. Take

care to avoid burn injury after

charging. Also, avoid charging the

watch under high-temperature

conditions like the ones described

below.

ーOn the dashboard of a vehicle

parked in the sun

ーNear an incandescent light bulb or

other source of heat

ーUnder direct sunlight or in other

hot areas for long periods

●The display panel may become

black (or white, depending on the

LCD type) under very high

temperatures. This is temporary,

and the display will return to normal

at lower temperatures.

Checking the Charge Level

A display indicator shows the watch’s charge

level when you enter the Timekeeping Mode.

lNavigating Between Modes

●The display will show charge levels 4 and 5,

even if the watch is not in the Timekeeping

Mode.

●Charge Level 1: Good

All functions enabled.

●Charge Level 2: Good

All functions enabled.

●Charge Level 3: Low

The functions below are disabled. Also, the

second hand jumps at two-second intervals.

●Time signal reception

●Compass, altitude, barometric pressure,

temperature measurements

●Face illumination

●Sounds (alarms, etc.)

One second later

●Charge Level 4: Low

Battery charge is lower than Level 3, and all

functions are disabled. Also, all hands are

stopped.

●Charge Level 5: Dead

All hands are stopped and digital displays are

blank. Memory data is lost, and watch settings

are returned to their initial factory defaults.

Operation Guide 5470

Produktspecifikationer

Varumärke:	Casio
Kategori:	Titta
Modell:	5470
Enhetsplacering:	Aanrecht
Färg på produkten:	Black, Red
Inbyggd display:	Nee
Bredd:	215 mm
Djup:	248 mm
Höjd:	358 mm
Vattennivåindikator:	Ja
Tillgångar:	1000 W
Sladdförvaring:	Ja
Kaffebryggare typ:	Half automatisch
Kaffeinmatningstyp:	Gemalen koffie
Kapacitet i koppar:	10 kopjes
Inbyggd kvarn:	Nee
Göra kaffe:	Ja
Mjölkbehållare:	Nee
Belyst på/av-knapp:	Ja
Typ produkt:	Filterkoffiezetapparaat