Casio Baby-G BGA-250-7A2ER Bruksanvisning

Casio Titta Baby-G BGA-250-7A2ER

Läs nedan 📖 manual på svenska för Casio Baby-G BGA-250-7A2ER (7 sidor) i kategorin Titta. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/7

Operation Guide 5570

E-9

Hand Setting Mode

Stopwatch Mode Alarm Mode

C C

E-8

Selecting a Mode

x Press C to cycle between the modes as shown below.

x In any mode (except when a setting screen, with flashing digits is on the display),

press to illuminate the display.B

Timekeeping Mode

World Time Mode Countdown Timer Mode

C C

E-7

Mode Reference Guide

Your watch has 6 “modes”. The mode you should select depends on what you

want to do.

To do this: Enter this mode: See:

x View the current date in the Home City

x Configure Home City and daylight saving time (DST)

settings

x Configure time and date settings

Timekeeping Mode E-11

View the current time in one of 27 cities

(29 time zones) around the globe World Time Mode E-19

Use the countdown timer Countdown Timer Mode E-21

Use the stopwatch to measure elapsed time Stopwatch Mode E-27

Set an alarm time Alarm Mode E-30

Adjust the analog hands Hand Setting Mode E-34

E-6

To turn an alarm and the Hourly Time Signal on and off……………………E-33

To stop the alarm ………………………………………………………………E-33

Adjusting the Analog Hand Setting…………………………………………………E-34

To adjust the analog time ………………………………………………………E-34

Illumination ……………………………………………………………………………E-36

To turn on illumination …………………………………………………………E-36

To change the illumination duration …………………………………………E-37

Troubleshooting ………………………………………………………………………E-38

Specifications …………………………………………………………………………E-39

Operating Precautions ………………………………………………………………E-41

User Maintenance ……………………………………………………………………E-52

E-5

To specify standard time or daylight saving time (DST) for a city …………E-20

Countdown Timer………………………………………………………………………E-21

To enter the Countdown Timer Mode …………………………………………E-21

To configure the countdown timer ……………………………………………E-24

To perform a countdown timer operation ……………………………………E-26

To stop the alarm ………………………………………………………………E-26

Using the Stopwatch …………………………………………………………………E-27

To enter the Stopwatch Mode …………………………………………………E-27

To perform an elapsed time operation ………………………………………E-28

To pause at a split time …………………………………………………………E-28

To measure two finishes ………………………………………………………E-28

Using the Alarm ………………………………………………………………………E-30

To enter the Alarm Mode ………………………………………………………E-31

To set an alarm time ……………………………………………………………E-32

To test the alarm ………………………………………………………………E-33

E-4

Contents

About This Manual …………………………………………………………………… E-2

Things to check before using the watch ………………………………………… E-3

Mode Reference Guide ……………………………………………………………… E-7

Timekeeping ……………………………………………………………………………E-11

Configuring Home City Settings ……………………………………………………E-12

To configure Home City settings ………………………………………………E-12

To change the Daylight Saving Time (summer time) setting ………………E-14

Adjusting the Digital Time and Date Settings ……………………………………E-15

To configure the digital time and date settings ………………………………E-15

Checking the Current Time in a Different Time Zone ……………………………E-19

To enter the World Time Mode ………………………………………………E-19

To view the time in another time zone ………………………………………E-19

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To configure Home City settings” (page E-12) to configure

your Home City and daylight saving time settings.

Important!

x Proper World Time Mode data depend on correct Home City, time, and date

settings in the Timekeeping Mode. Make sure you configure these settings

correctly.

2. Set the current time.

x See “Adjusting the Digital Time and Date Settings” (page E-15).

The watch is now ready for use.

E-2

About This Manual

x Depending on the model of your watch, display text appears either as dark figures

on a light background, or light figures on a dark background. All sample displays in

this manual are shown using dark figures on a light background.

x Button operations are indicated using the letters shown in the illustration.

x Note that the product illustrations in this manual are intended for reference only,

and so the actual product may appear somewhat different than depicted by an

illustration.

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

To ensure that this watch provides you with the years of service for which it is

designed, carefully read and follow the instructions in this manual, especially the

information under “Operating Precautions” and “User Maintenance”.

Operation Guide 5570

E-19

Checking the Current Time in a Different Time Zone

You can use the World Time Mode to view the current

time in one of 29 time zones (27 cities) around the

globe. The city that is currently selected in the World

Time Mode is called the “World Time City”.

To enter the World Time Mode

Use to select the World Time Mode as shown on C

page E-8.

To view the time in another time zone

In the World Time Mode, use (East) to scroll through D

city codes.

Currently selected

World Time City

Current time in the currently

selected World Time City

E-18

Note

x For information about selecting a Home City and configuring the DST setting, see

“Configuring Home City Settings” (page E-12).

x While 12-hour format is selected for timekeeping, a indicator will appear for PM

times from noon to 11:59 p.m. No indicator appears for times from midnight to

11:59 a.m. With 24-hour format, time is displayed from 0:00 to 23:59, without any

PM indicator.

x The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to

change it except after you have the watch’s battery replaced.

x The day of the week changes automatically when the date changes.

E-17

3. When the timekeeping setting you want to change is flashing, use and/or D B

to change it as described below.

Screen To do this: Do this:

Reset the seconds to 00 Press D.

Toggle between Daylight Saving Time (ON)

and Standard Time (OFF)Press D.

Change the city code Use (East) and (West).D B

Change the hour or minute Use (+) and (–).D B

Toggle between 12-hour ( ) and 24-hour 12H

(24H) timekeeping Press D.

Change the year, month, or day Use (+) and (–).D B

4. Press to exit the setting screen.A

E-16

2. Press to move the flashing in the sequence shown below to select the other C

settings.

Time and Date

Seconds

DST

Home City Code

Hour

Minutes

C C

Illumination Duration

Day

Month

Year

12/24-Hour Format

x The following steps explain how to configure timekeeping settings only.

E-15

Adjusting the Digital Time and Date Settings

Use the procedure below to adjust the digital time and date settings.

Note

x After adjusting the digital time and date setting, be sure to adjust the analog hands

so the settings match.

x See “Adjusting the Analog Hand Setting” (page E-34).

To configure the digital time and date settings

1. In the Timekeeping Mode, hold down for about twoA

seconds until the seconds start to flash. This is the

setting screen.

Seconds

E-14

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down for about two A

seconds until the seconds start to flash. This is the

setting screen.

2. Press to display the DST setting screen.C

3. Press to toggle between Daylight Saving Time (On) D

and Standard Time (OFF).

4. After the setting is the way you want, press to A

return to the Timekeeping Mode.

x The indicator appears to indicate that DaylightDST

Saving Time is turned on.

DST indicator

E-13

2. Press twice to move the flashing to the city code.C

x For details about city codes, see the “City Code

Table” at the back of this manual.

3. Press (East) and (West) to select the city code D B

you want to use as your Home City.

x Keep pressing or until the city code you wantD B

to select as your Home City appears on the display.

4. After the setting is the way you want, press to A

return to the Timekeeping Mode.

Note

x After you specify a city code, the watch will use UTC* offsets in the World Time

Mode to calculate the current time for other time zones based on the current time

in your Home City.

* Coordinated Universal Time, the world-wide scientific standard of timekeeping.

The reference point for UTC is Greenwich, England.

City Code

E-12

Configuring Home City Settings

There are two Home City settings: actually selecting the Home City, and selecting

either standard time or daylight saving time (DST).

Note

x After configuring Home City and/or Daylight Saving Time

(summer time) settings, be sure to adjust the analog

hands to match the digital settings.

x See “Adjusting the Analog Hand Setting” (page E-34).

To configure Home City settings

1. In the Timekeeping Mode, hold down for about twoA

seconds until the seconds start to flash. This is the

setting screen.

x The watch will exit the setting screen automatically

if you do not perform any operation for about two or

three minutes.

Seconds

E-11

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

x Each press of D cycles the digital display contents as

shown below.

D D D

PM indicator

Day of the Week Month-Day Hour : Minutes Seconds

Hour

Day of week

Minutes

E-10

General Functions (All Modes)

The functions and operations described in this section can be used in all of the

modes.

Auto Return Features

If you leave a setting screen with flashing digits on the display for two or three

minutes without performing any operation, the watch exits the setting screen

automatically.

Initial Screens

When you enter the World Time Mode or Alarm Mode, the data you were viewing

when you last exited the mode appears first.

Scrolling

The and buttons are used on the setting screen to scroll through data on the B D

display. In most cases, holding down these buttons during a scroll operation scrolls

through the data at high speed.

Operation Guide 5570

E-29

Note

x The Stopwatch Mode can indicate elapsed time up to 59minutes, 59seconds.

x An ongoing elapsed time measurement operation will continue internally even if

you change to another mode. However, if you exit the Stopwatch Mode while a

split time is displayed, the split time will not be displayed when you return to the

Stopwatch Mode.

E-28

To perform an elapsed time operation

D D D D A

Start Stop (Resume) (Stop) Reset

To pause at a split time

D A A D A

Start Split

(SPL displayed)

Split release Stop Reset

To measure two finishes

D A D A A

Start Split

(SPL displayed)

First runner finishes.

Display time of first

runner.

Stop

Second runner

finishes.

Split release

Display time of

second runner.

Reset

E-27

Using the Stopwatch

The stopwatch measures elapsed time, split times, and two finishes.

To enter the Stopwatch Mode

Use to select the Stopwatch Mode as shown on C

page E-9.

Seconds

Minutes

E-26

To perform a countdown timer operation

D D D D A

Start Stop Resume (Stop) Reset

x Before starting a countdown timer operation, check to make sure that a

countdown operation is not in progress (indicated by the seconds counting down).

If it is, press D to stop it and then to reset to the countdown start time.A

To stop the alarm

Press any button.

E-25

3. When the setting you want to change is flashing, use and to change it as B D

described below.

Setting Screen Button Operation

Start Time

Use (+) and (–) to change the setting.D B

x You can set a start time in the range of 1 to 60minutes in

1-minute increments.

Auto-repeat Press to toggle auto-repeat on ( displayed) and off D

( displayed).

Progress Beeper Press to toggle the progress beeper on ( ) and off D

( ).

4. Press to exit the setting screen.A

x You can also perform steps 1 and 2 of the above procedure whenever you need

to view the current auto-repeat and progress beeper settings.

E-24

To configure the countdown timer

1. While the countdown start time is on the display in

the Countdown Timer Mode, hold down until the A

current countdown start time starts to flash, which

indicates the setting screen.

x If the countdown start time is not displayed, use the

procedure under “To perform a countdown timer

operation” (page E-26) to display it.

2. Press to move the flashing in the sequence shown below to select other C

settings.

Start Time Auto-repeat Progress Beeper

C C

E-23

Countdown End Beeper

The countdown end beeper lets you know when the countdown reaches zero.

x When the progress beeper is turned off, the countdown end beeper sounds for

about 10seconds, or until you press any button to stop it.

x When the progress beeper is turned on, the countdown end beeper sounds for

about one second.

Progress Beeper

When the progress beeper is turned on, the watch uses beeps to signal countdown

progress as described below.

x Starting from five minutes before the end of the countdown, the watch emits four

short beeps at the top of each countdown minute.

x 30seconds before the end of the countdown, the watch emits four short beeps.

x The watch emits a short beep for each of the last 10seconds of the countdown.

x If the countdown start time is six minutes or greater, the watch emits a short beep

for each second of the final 10seconds before the five-minute point is reached.

Four short beeps are emitted to signal when the five-minute point is reached.

E-22

x See “To configure the countdown timer” on page E-24 for information about setting

up the timer.

Auto-repeat

When auto-repeat is turned on, the countdown automatically restarts from the

countdown start time when it reaches zero. If left running, the countdown is

repeated a total of eight times, after which it stops automatically.

When auto-repeat is turned off, the countdown stops when it reaches zero and the

display shows the original countdown start time.

x Pressing D while an auto-repeat countdown is in progress pauses the current

countdown. You can resume the auto-repeat countdown by pressing , or you D

can press to reset to the countdown time starting value.A

Countdown Timer Beeper Operations

The watch beeps at various times during a countdown so you can keep informed

about the countdown status without looking at the display. The following describes

the types of beeper operations the watch performs during a countdown.

E-21

Countdown Timer

The countdown timer can be set within a range of

one minute to 60minutes. An alarm sounds when the

countdown reaches zero. The countdown timer also has

an auto-repeat feature and a progress beeper that signals

the progress of the countdown.

To enter the Countdown Timer Mode

Use to select the Countdown Timer Mode as shown C

on page E-8.

Configuring the Countdown Timer

The following are the settings you should configure

before actually using the countdown timer.

Countdown start time; Auto-repeat on/off; Progress

beeper on/off

Seconds

Minutes

E-20

To specify standard time or daylight saving time (DST) for a city

1. In the World Time Mode, use (East) to display the D

city code (time zone) whose Standard Time/Daylight

Saving Time setting you want to change.

2. Hold down for about two seconds.A

x This toggles the city code you selected in step1

between Daylight Saving Time ( indicatorDST

displayed) and standard time ( indicator not DST

displayed).

x Using the World Time Mode to change the DST setting of the city code that is

selected as your Home City also will change the Timekeeping Mode time DST

setting.

x Note that you cannot switch between standard time/daylight saving time (DST)

while is selected as the World Time City.GMT

x The standard time/daylight saving time (DST) setting affects only the currently

selected time zone. Other time zones are not affected.

DST indicator

Produktspecifikationer

Varumärke:	Casio
Kategori:	Titta
Modell:	Baby-G BGA-250-7A2ER
Enhetsplacering:	Vrijstaand
Färg på produkten:	Roestvrijstaal
Inbyggd display:	Ja
Bredd:	1210 mm
Djup:	630 mm
Höjd:	1852 mm
Nettoskatt:	- W
Ismaskin:	Ja
Ljudnivå:	40 dB
Årlig-energiförbrukning:	387 kWu
Energieffektivitetsklass (gammal):	A++
Frys bruttokapacitet:	150 l
Frys nettokapacitet:	119 l
Fryskapacitet:	14 kg/24u
Belysning inuti:	Ja
Avfrostningsfunktion:	Ja
Kylskåpets nettokapacitet:	548 l
Kylskåp med bruttokapacitet:	576 l
Antal hyllor i kylskåp:	9
Frysläge:	Onder
Retentionstid vid strömavbrott:	31 uur
antal stjärnor:	4*
Total nettokapacitet:	668 l
Flaskställ:	Ja
Inget frostsystem:	Ja
Total bruttokapacitet:	726 l
Inbyggd frys:	Ja
Till fackområdet:	Ja
Larm för öppen dörr:	Ja
Antal kylkompressorer:	2
Energianvändning per dag:	1.06 kWh/24u
Antal kompressorer:	2
Klimaatklasse:	SN-T
Produktdesign:	Frans deur