Casio Collection AW-48H-1BVEF Bruksanvisning

Casio Titta Collection AW-48H-1BVEF

Läs nedan 📖 manual på svenska för Casio Collection AW-48H-1BVEF (2 sidor) i kategorin Titta. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
Operation Guide 3321
1
MA0310-EA
About This Manual
Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
Timekeeping Mode Calendar Mode Alarm Mode Dual Time Mode Stopwatch Mode
Press .
General Guide
Press B to change from mode to mode.
Timekeeping
Use this mode to set the current time. An incorrect digital time setting will cause
incorrect operation of the calendar.
To set the digital time
PM
indicator
Hour hand Minute hand
Seconds
Minutes
Hour
Press .
Press .Press .
Hold down . Press .
Seconds Hour
Minutes12/24
1. In the Timekeeping Mode, hold down C until the seconds digits start to flash,
which indicates the setting screen.
2. Press B to reset the seconds to 00.
3. Press C to move the selection to the hour digits.
4. Press B to increase the hour digits.
5. Press C to move the selection to the minutes digits.
6. Press B to increase the minutes digits.
7. Press C to move the selection to 12/24.
8. Press B to toggle the timekeeping format between 12-hour and 24-hour.
9. Press C to exit the setting screen.
Resetting the seconds to 00 while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to 00
without changing the minutes.
With the 12-hour format, the P (PM) indicator appears on the display for times in the
range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
To set the hands
In any mode, press A with a thin object to advance the analog time setting. Each
press of A advances the time by 20 seconds. Three presses advance by one minute.
Holding down A advances the analog setting at high speed. You can only advance
the setting. You cannot reverse it.
Calendar
Use this mode to set today s date (month, day, day of the week).
To set the date
Day of week
Day
Month
Press .Hold down . Press .
Press .
DayMonth Day of week
1. In the Calendar Mode, hold down C until the month digits start to flash, which
indicates the setting screen.
2. Press B to increase the month digits.
3. Press C to move the selection to the day digits.
4. Press B to increase the day digits.
5. Press C to move the selection to the day of the week.
6. Press B to advance to the next day.
7. Press C to exit the setting screen.
The watch does not make any allowance for leap years. Be sure to manually set
February 29 when one occurs during a leap year.
Alarm
When the Daily Alarm is turned on, an alarm sounds for 20 seconds at the preset time
each day. When the Hourly Time Signal is turned on, the watch beeps every hour on
the hour.
You can configure alarm settings and Hourly Time Signal settings in the Alarm
Mode, which you enter by pressing B.
To set the alarm time and to turn the Daily Alarm and Hourly Time Signal on
and off
Hourly time
signal on indicator
Mode indicator
Alarm on indicator
Hour
Minutes
Press
.
Press
.
Press
.
Hold down
.
Press .
Left
minutes
digit
Right
minutes
digit
Hour
Alarm/Hourly Time Signal setting
1. In the Alarm Mode, hold down C until the hour digits start to flash, which indicates
the setting screen.
2. Press B to increase the hour digits.
The 12/24-hour format of the alarm time matches the format you select for normal
timekeeping.
3. Press C to move the selection to the left minutes digit.
4. Press B to increase the left minutes digit.
5. Press C to move the selection to the right minutes digit.
6. Press B to increase the right minutes digit.
7. Press C to move to the Daily Alarm and Hourly Time Signal on and off setting.
8. Press B to cycle through the Daily Alarm and Hourly Time Signal settings as
shown in the sequence below.
At this time Daily Alarm and Hourly Time Signal automatically turn on.
Daily Alarm
only
Both OFFBoth ON Hourly Time
Signal only
Press
.
Press
.
Press
.
Press .
9. Press C to exit the setting screen.
To stop the alarm
Press any button to stop the alarm after it starts to sound.
To test the alarm and select an alarm tone
Hold down in any mode (except when making any settings) to sound the alarm.B
Note that the alarm sound changes each time you hold down to test the alarm.B
There are a total of four different alarm sounds. The last alarm sound you hear when
performing the above test is the one that is used for the Daily Alarm and the Hourly
Time Signal.
Note that holding down B also changes the mode.
Operation Guide 3321
2
Mode indicator
Minutes 1/100
second
Seconds
Dual Time
The Dual Time Mode lets you keep track of time in a different time zone.
In the Dual Time Mode, the seconds count is synchronized with the seconds count
of the Timekeeping Mode digital time.
To set the Dual Time
Seconds
Minutes
Hour
Press .Hold down . Press .
Press .
Minutes 12/24Hour
Mode
indicator
1. In the Dual Time Mode, hold down C until the hour digits start to flash, which
indicates the setting screen.
2. Press B to increase the hour digits.
3. Press C to move the selection to the minutes digits.
4. Press B to increase the minutes digits.
5. Press C to move the selection to 12/24.
6. Press B to toggle the timekeeping format between 12-hour and 24-hour.
7. Press C to exit the setting screen.
With the 12-hour format, the P (PM) indicator appears on the display for times in the
range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
Stopwatch
The Stopwatch Mode lets you measure elapsed time. The
range of the stopwatch is 59 minutes, 59.99 seconds.
The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
To use the Stopwatch
1. In the Stopwatch Mode, press to start theC
stopwatch.
2. Press to stop the time measurement.C
You can press as many times as you want toC
resume and stop timing.
3. After you are finished using the stopwatch, hold down
C to clear the stopwatch time to all zeros.
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Auto return features
If you leave a screen with flashing digits for one or two minutes without performing
any operation, the watch automatically saves any settings you have made up to that
point and exits the setting screen.
Scrolling
The B button is used to scroll through setting screen data on the display. Holding
down this button during a scroll operation scrolls through the data at high speed.

Produktspecifikationer

Varumärke: Casio
Kategori: Titta
Modell: Collection AW-48H-1BVEF

Behöver du hjälp?

Om du behöver hjälp med Casio Collection AW-48H-1BVEF ställ en fråga nedan och andra användare kommer att svara dig




Titta Casio Manualer

Titta Manualer

Nyaste Titta Manualer