Casio Collection F-201WAM-5AVEF Bruksanvisning

Casio Titta Collection F-201WAM-5AVEF

Läs nedan 📖 manual på svenska för Casio Collection F-201WAM-5AVEF (3 sidor) i kategorin Titta. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

Operation Guide 3238

E-9

Alarms

You can set up to ﬁ ve independent multi-function alarms

with hour, minutes, month, and day. When an alarm is

turned on, the alarm tone sounds when the alarm time

is reached. One of the alarms can be conﬁ gured as a

snooze alarm or a one-time alarm, while the other four are

one-time alarms.

You can also turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

There are ﬁ ve alarms numbered x1 through

5. You can

conﬁ gure Alarm1 as a snooze alarm or a one-time alarm.

Alarms 2 through

5 can be used as one-time alarms

only.

All of the operations in this section are performed in the x

Alarm Mode, which you enter by pressing (page E-4).C

Alarm number

Alarm time

(Hour : Minutes)

Alarm date

(Month – Day)

E-8

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press to toggle between 12-hour timekeeping and D

24-hour timekeeping.

With the 12-hour format, the xP (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without x

any indicator.

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is x

applied in all other modes.

E-7

When the setting you want to change is ﬂ ashing, press 3. to change it as D

described below.

To change this setting Perform this button operation

Seconds Press to reset to .D00

Hour, Minutes, Year, Month, Day Press to increase the setting.D

Pressing xD while the seconds are in the range of 30 to 59 resets them to and 00

adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

Press 4. to exit the setting screen.A

The day of the week is automatically displayed in accordance with the date (year, x

month, and day) settings.

The year can be set in the range of 2000 to 2099. x

The watch’s built-in full automatic calendar automatically makes allowances for x

different month lengths and leap years. Once you set the date, there should be no

reason to change it except after you have the watch’s battery replaced.

E-6

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

To set the time and date

In the Timekeeping Mode, hold down 1. until the A

seconds start to ﬂ ash, which indicates the setting

screen.

Press 2. to move the ﬂ ashing in the sequence shown C

below to select other settings.

Seconds Hour Minutes

Month YearDay

Seconds

Hour : Minutes

PM indicator

Month – Day

Day of week

E-5

In any mode, hold down xC for about one second to return to the Timekeeping

Mode.

Countdown Timer

Mode Stopwatch Mode Dual Time Mode

E-4

General Guide

Press xC to change from mode to mode.

In any mode, press xB to illuminate the display for about one second.

Timekeeping Mode Alarm Mode

Press .C

E-3

To set the Dual Time ............................................................................................. E-21

To illuminate the display ....................................................................................... E-22

E-2

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To set the time and date ......................................................................................... E-6

To toggle between 12-hour and 24-hour timekeeping ......................................... E-8

To set an alarm time .............................................................................................. E-11

To test the alarm .................................................................................................... E-13

To turn Alarms 2 through 5 and the Hourly Time Signal on and off ............... E-14

To select the operation of Alarm

1 ...................................................................... E-15

To use the countdown timer ................................................................................. E-16

To set the countdown start time .......................................................................... E-17

To turn auto-repeat on and off ............................................................................. E-18

To measure times with the stopwatch ................................................................. E-20

E-1

Contents

General Guide ..........................................................................................................E-4

Timekeeping .............................................................................................................E-6

Alarms ......................................................................................................................E-9

Countdown Timer ..................................................................................................E-16

Stopwatch ..............................................................................................................E-19

Dual Time ...............................................................................................................E-21

Illumination ............................................................................................................E-22

Reference ............................................................................................................... E-23

Speciﬁ cations ........................................................................................................ E-24

MA1101-EA

About This Manual

Depending on the model of your watch, display text x

appears either as dark ﬁ gures on a light background or

light ﬁ gures on a dark background. All sample displays

in this manual are shown using dark ﬁ gures on a light

background.

Button operations are indicated using the letters shown x

in the illustration.

Each section of this manual provides you with the x

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Operation Guide 3238

E-19

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two ﬁ nishes.

The display range of the stopwatch is 23 hours, 59 x

minutes, 59.99 seconds.

The stopwatch continues to run, restarting from zero after x

it reaches its limit, until you stop it.

The stopwatch measurement operation continues even if x

you exit the Stopwatch Mode.

Exiting the Stopwatch Mode while a split time is frozen x

on the display clears the split time and returns to elapsed

time measurement.

All of the operations in this section are performed in the x

Stopwatch Mode, which you enter by pressing (page C

E-5).

Seconds

Minutes

Hours

1/100 second

E-18

To turn auto-repeat on and off

In the Countdown Timer Mode, hold down 1. until the A

hours setting of the countdown start time starts to ﬂ ash,

which indicates the setting screen.

Press 2. to toggle auto-repeat on ( displayed) BA.RPT

and off ( not displayed).A.RPT

Note that pressing xB in the above operation also turns

on illumination.

When the end of the countdown is reached while x

auto-repeat is on, the alarm sounds, but the countdown

restarts from the beginning without stopping. You can

stop the countdown by pressing and manually reset to D

the start time by pressing .A

The auto-repeat indicator appears in the Countdown x

Timer Mode only.

Auto-repeat indicator

E-17

The countdown timer measurement operation continues even if you exit the x

Countdown Timer Mode.

Press xD D while a countdown operation is in progress to pause it. Press again to

resume the countdown.

To completely stop a countdown operation, ﬁ rst pause it (by pressing xD), and then

press . This returns the countdown time to its starting value.A

To set the countdown start time

In the Countdown Timer Mode, hold down 1. until the A

hours setting of the countdown start time starts to ﬂ ash,

which indicates the setting screen.

Press 2. to move the ﬂ ashing between the hours and C

minutes settings.

While a setting is ﬂ ashing, use 3. to increase it.D

To set the starting value of the countdown time to 24 x

hours, set 0:00.

Press 4. to exit the setting screen.A

E-16

Countdown Timer

The countdown timer can be set within a range of one

minute to 24 hours. An alarm sounds when the countdown

reaches zero.

You can also select auto-repeat, which automatically x

restarts the countdown from the original value you set

whenever zero is reached.

All of the operations in this section are performed in the x

Countdown Timer Mode, which you enter by pressing C

(page E-5).

To use the countdown timer

Press while in the Countdown Timer Mode to start the D

countdown timer.

When the end of the countdown is reached and auto-repeat is turned off, the alarm x

sounds for 10 seconds or until you stop it by pressing any button. The countdown

time is automatically reset to its starting value after the alarm stops.

Seconds

Minutes

Hours

E-15

To select the operation of Alarm1

In the Alarm Mode, use 1. to select AlarmD1.

Press 2. to cycle through the available settings in the sequence shown below.A

Snooze on indicator (SNZ) and Alarm1 on indicator

One-time

alarm on

Snooze

alarm on Alarm off

The snooze on indicator ( xSNZ) and Alarm1 on indicator are displayed in all modes.

The snooze on indicator (

SNZ) ﬂ ashes during the 5-minute intervals between

alarms.

The alarm indicator (Alarm x1 on and/or ) ﬂ ashes while the alarm is sounding.SNZ

E-14

To turn Alarms 2 through 5

and the Hourly Time Signal on and off

In the Alarm Mode, use 1. to select a one-time alarm D

(alarm number

2 through 5) or the Hourly Time Signal

(

:00).

Press 2. to toggle it on and off.A

The on/off status of Alarms x2 through

5 and the Hourly

Time Signal is shown by indicators along the bottom of

the displays.

The alarm on indicators and Hourly Time Signal on x

indicator are displayed in all modes.

While an alarm is sounding, the applicable alarm on x

indicator ﬂ ashes on the display.

Hourly Time Signal

on indicator

Alarm on indicator

E-13

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode

the watch is in. In the case of the snooze alarm, the alarm operation is performed a

total of seven times, every ﬁ ve minutes, until you turn the alarm off or change it to a

one-time alarm (page E-14).

To stop the alarm tone after it starts to sound, press any button. x

Performing any one of the following operations during a 5-minute interval between x

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen (page E-6)

Displaying the alarm1 setting screen (page E-11)

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

E-12

Press 3. to move the ﬂ ashing in the sequence shown below to select other C

settings.

Hour Minutes Month Day

While a setting is ﬂ ashing, press 4. to increase it.D

To set an alarm that does not include a month (Daily alarm, Monthly alarm), set xx

for the month. Press until the Dx mark appears (between 12 and 1) while month

setting is ﬂ ashing.

To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set xxx

for the day. Press until the Dxx mark appears (between the end of the month

and 1) while the day setting is ﬂ ashing.

When setting the alarm time using the 12-hour format, take care to set the time x

correctly as a.m. or p.m. ( indicator).P

Press 5. to exit the setting screen.A

E-11

To set an alarm time

In the Alarm Mode, use 1. to scroll through the alarm D

screens until the one whose time you want to set is

displayed.

x1 x2 x3

x5 x4:00

To set a one-time alarm, display one of the screens indicated by an alarm number x

from 2 through 5. To set the snooze alarm, display the screen indicated by

After you select an alarm, hold down 2. until the hour setting of the alarm time A

starts to ﬂ ash, which indicates the setting screen.

This operation automatically turns on the alarm. x

E-10

Alarm Types

The alarm type is determined by the settings you make, as described below.

x Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to

sound everyday at the time you set.

x Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound at the speciﬁ c time, on the speciﬁ c date you set.

x 1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at time you set, only during the month you set.

x Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the

alarm to sound every month at time you set, on the day you set.

Operation Guide 3238

E-25

Dual Time: Hour, minutes, seconds, p.m. (P)

Illumination: LED (light-emitting diode)

Battery: One lithium battery (Type: CR2025)

Approximately 10 years on type CR2025 (assuming alarm operation 10 sec./day,

and one illumination operation 1.5 sec./day)

E-24

Speciﬁ cations

Accuracy at normal temperature: ±30 seconds a month

Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week

Time system: Switchable between 12-hour and 24-hour formats

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Alarms: 5 Multi-function*alarms (Four one-time alarms; one snooze/one-time alarm);

Hourly Time Signal

* Alarm type: Daily alarm, Date alarm, 1-month alarm, Monthly alarm

Countdown Timer

Measuring unit: 1 second

Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments)

Other: Auto-repeat function

Stopwatch

Measuring unit: 1/100 of a second

Measuring capacity: 23:59' 59.99"

Measuring modes: Elapsed time, split time, two ﬁ nishes

E-23

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Auto return features

If you leave a screen with ﬂ ashing digits for two or three minutes without performing

any operation, the watch automatically saves any settings you have made up to that

point and exits the setting screen.

Data and Setting Scrolling

The button is used to scroll through setting screen data on the display. Holding D

down this button during a scroll operation scrolls through the data at high speed.

E-22

Illumination

An LED (light-emitting diode) and a light guide panel

illuminate the entire display for easy reading in the dark.

Illumination may be hard to see when viewed under direct x

sunlight.

Illumination turns off automatically whenever an alarm x

sounds.

Frequent use of illumination runs down the battery life. x

To illuminate the display

In any mode, press to illuminate the display for about B

one second.

E-21

Dual Time

The Dual Time Mode lets you keep track of time in a different time zone.

In the Dual Time Mode, the seconds count is synchronized with the seconds count x

of the Timekeeping Mode.

To set the Dual Time

Press 1. to enter the Dual Time Mode (page E-5).C

In the Dual Time Mode, hold down 2. until the hour A

setting starts to ﬂ ash, which indicates the setting screen.

Press 3. to change the selection in the following C

sequence.

Hour Minutes

Press 4. to increase the setting.D

Press 5. to exit the setting screen.A

Seconds

Hour : Minutes

E-20

To measure times with the stopwatch

Elapsed time

D D D D A

Start Stop Re-start Stop Clear

Split time

D A A D A

Start Split

( displayed)SPL

Split release Stop Clear

Two Finishes

D A D A A

Start Split

First runner

ﬁ nishes.

Display time of

ﬁ rst runner.

Stop

Second runner

ﬁ nishes.

Split release

Display time of

second runner.

Clear

Produktspecifikationer

Varumärke:	Casio
Kategori:	Titta
Modell:	Collection F-201WAM-5AVEF
Färg på produkten:	Zwart
Bredd:	28 mm
Djup:	88 mm
Höjd:	11 mm
Användarmanual:	Ja
Husmaterial:	Kunststof
LED-indikatorer:	Network, Power
Typ av förpackning:	Doos
Processormodel:	Ja
Anslutningsteknik:	Draadloos
Kompatibla minneskort:	MicroSD (TransFlash)
Snabbstartsguide:	Ja
Certifiering:	CE, WHQL, GCF
Gränssnitt:	WWAN
Internminne:	1024 MB
Hållbarhetscertifikat:	RoHS
Typ processor:	Ja
Internera:	Nee
Webbaserad hantering:	Ja
Stöder Mac-operativsystem:	Mac OS X 10.10 Yosemite, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Strömförsörjning via USB:	Ja
Värdgränssnitt:	USB
Maximal dataöverföringshastighet:	150 Mbit/s
Antenn:	Ja
Komponent för:	PC/notebook
Antenndesign:	Intern