Casio Collection TRT-110H-2AVEF Bruksanvisning

Casio Titta Collection TRT-110H-2AVEF

Läs nedan 📖 manual på svenska för Casio Collection TRT-110H-2AVEF (3 sidor) i kategorin Titta. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/3
Operation Guide 3463
E-9
Illumination
In any mode, press to illuminate the display for about two seconds.L
xIllumination may be hard to see when viewed under direct sunlight.
xIllumination turns off automatically whenever an alarm sounds.
xFrequent use of illumination runs down the battery.
E-8
5. After you set the time and date, press to return to the Timekeeping Mode.A
E-7
3. While the seconds digits are selected (fl ashing), press to reset the seconds to D
00. If you press while the seconds count is in the range of 30 to 59, the seconds D
are reset to 00 and 1 is added to the minutes. If the seconds count is in the range of
00 to 29, the minutes count is unchanged.
4. While any other digits (beside seconds) are selected (fl ashing), press to D
increase the number or to decrease it. While the 12/24-hour format setting is B
selected, press or to toggle it between 12 and 24.D B
x Except for when adjusting the seconds or setting the 12/24-hour format, holding
down a button changes the current selection at high speed.
x When the 12-hour format is selected, the indicator appears on the display to P
indicate “P.M.” times. There is no indicator for “A.M.” times.
x When the 24-hour format is selected, the indicator appears on the display.24
x The year can be set in the range of 2000 to 2099.
x The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
E-6
Timekeeping Mode
To set the time and date
1. Hold down while in the Timekeeping Mode until A
the seconds digits fl ash on the display because they
are .selected
2. Press to change the selection in the following C
sequence.
12/24-Hour Format
C
C
C
Seconds Hour Minutes
Day Month Year
C C
C
C
Seconds
Day of week
Month – Day
Vibration alarm on indicator
(page E-10)
PM indicator
Minutes
Hour
E-5
x This watch returns to the Timekeeping Mode whenever you hold down the button C
for one or two seconds. If you ever lose track of what mode you are in or what you
should do next, hold down to return to regular timekeeping.C
x In any mode press to illuminate the display.L
C C
C
Stopwatch Mode Alarm Mode Dual Time Mode
E-4
General Guide
x Press to change from mode to mode.C
x After you perform an operation in any mode, pressing returns to the Timekeeping C
Mode.
x If you do not press any button for a few minutes while making settings in any mode
(indicated when settings are fl ashing), the watch automatically clears the setting screen
(settings stop fl ashing) and returns to the normal display for the mode you are in.
C
Timekeeping Mode Countdown Alarm Mode
C
E-3
Alarm Mode ……………………………………………………………………………E-17
To set the alarm time ……………………………………………………………E-17
To turn the daily alarm and hourly time signal on and off …………………E-19
To test the alarm sound ………………………………………………………E-20
Dual Time Mode ………………………………………………………………………E-21
To set the Dual Time ……………………………………………………………E-21
Specifications …………………………………………………………………………E-23
E-2
Contents
General Guide ……………………………………………………………………… E-4
Timekeeping Mode …………………………………………………………………… E-6
To set the time and date ……………………………………………………… E-6
Illumination …………………………………………………………………………… E-9
Vibration Alarm …………………………………………………………………………E-10
To turn the vibration alarm on and off…………………………………………E-11
Countdown Alarm Mode………………………………………………………………E-12
To set the countdown start time ………………………………………………E-12
To use the countdown alarm …………………………………………………E-13
Stopwatch Mode ………………………………………………………………………E-14
To turn the Auto-Start function on and off ……………………………………E-16
E-1
About This Manual
x Note that the product illustrations in this manual are intended for reference only,
and so the actual product may appear somewhat different than depicted by an
illustration.
x All explanations in this manual use expressions such as “sounds the alarm” for
alarm operations. When the Vibration Alarm is turned on, these expressions should
be understood to mean “causes the watch to vibrate” (page E-10).
MO1803-EA © 2018 CASIO COMPUTER CO., LTD.
Operation Guide 3463
E-19
To turn the daily alarm and hourly time signal on and off
Press while in the Alarm Mode to change the status of the daily alarm and hourly B
time signal in the following sequence.
B B B
Both OFF Daily Alarm
Only
Hourly Time
Signal Only
Both ON
B
x The alarm on indicator ( ) and the Hourly Time Signal on indicator ( ) are shown
on the display in all modes while these functions are turned on.
E-18
3. Press to increase the selected digits and to decrease them. Holding down D B
either button changes the selection at high speed.
x The format (12-hour and 24-hour) of the alarm time matches the format you select
for regular timekeeping.
x When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning (no indicator) or afternoon ( ).P
4. After you set the alarm time, press to return to the Alarm Mode.A
E-17
Alarm Mode
When the Daily Alarm is turned on, an alarm operation
(20-second tone or 10-second vibration) is performed
at the preset time each day. Press any button to stop
the alarm after it starts to sound. When the Hourly Time
Signal is on, the watch beeps every hour on the hour.
To set the alarm time
1. Hold down until the hour digits start to fl ash on A
the display. The hour digits fl ash because they are
selected.
x This operation will switch the Daily Alarm on
automatically.
2. Press to change the selection in the following C
sequence.
Hour Minutes
C
Hourly time signal
on indicator
Current time
Alarm on indicator
Minutes
Hour
Mode indicator
E-16
About the Auto-Start function
With the Auto-Start function, pressing causes the watch to perform a fi ve-D
second countdown. When the countdown reaches zero, stopwatch operation starts
automatically. During the fi nal three seconds of the countdown, a beeper sounds with
each second.
To turn the Auto-Start function on and off
While the display is showing all zeros in the Stopwatch Mode, press to toggle it B
on and off.
x The indicator appears and is shown in the upper display while Auto-AUTO-ST 05
Start is turned on. The indicator is not shown and the upper part of the AUTO-ST
display shows the current time when Auto-Start is turned off.
E-15
(a) Elapsed time measurement
DDDDB
Start Stop Re-start Stop Reset
(b) Split time measurement
DBBDB
Start Split Split release Stop Reset
(c) Split time and two fi nishes
DBDBB
Start Split
First runner
nishes.
Stop
Second runner
nishes.
Record time of
rst runner.
Split release
Record time of
second runner.
Reset
E-14
Stopwatch Mode
The Stopwatch Mode lets you measure elapsed time,
split times, and two fi nishes. The range of the stopwatch
is 23 hour, 59 minutes, 59.99 seconds. The Stopwatch
Mode also features an Auto-Start function.
1/100 Seconds
Seconds
Minutes
Current time
Mode indicator
E-13
3. Press to increase the selected number or to decrease it. Holding down either D B
button changes the selection at high speed.
x Press and at the same time to clear the starting time to 0:00' 00".D B
x To set the starting value of the countdown time to 24 hours, set 0:00' 00".
4. After you set the countdown start time, press to return to the Countdown Alarm A
Mode.
To use the countdown alarm
1. Press while in the Countdown Alarm Mode to start the countdown alarm.D
2. Press again to stop the countdown alarm.D
x You can resume countdown alarm operation by pressing .D
3. Stop the countdown alarm and then press to reset the countdown time to its B
starting value.
x When the end of the countdown is reached, the alarm sounds for 10 seconds or
until you stop the alarm by pressing any button. Countdown timing stops and the
countdown time is automatically reset to its starting value after the alarm stops.
E-12
Countdown Alarm Mode
The countdown alarm can be set within a range of
1 second to 24 hours. When the countdown reaches
zero, an alarm sounds for 10 seconds or until you press
any button.
To set the countdown start time
1. Hold down while in the Countdown Alarm Mode. A
The hours digits fl ash on the display because they
are .selected
2. Press to change the selection in the following C
sequence.
C C
Hour Minutes Seconds
C
1/10 Seconds
Seconds
Minutes
Mode indicator
Current time
E-11
To turn the vibration alarm on and off
In the Timekeeping Mode, hold down for about D
two seconds to toggle the Vibration Alarm between on
(Vibration Alarm on indicator displayed) and off (indicator
not displayed).
x The watch will vibrate when you toggle to on, and beep
when you toggle to off.
x Turning on the Vibration Alarm also disables the button
operation tone.
Vibration alarm on indicator
E-10
Vibration Alarm
When the Vibration Alarm is turned on, the watch vibrates instead of sounding an
alarm. This lets you use the watch without disturbing others by beeping sounds.
x The Vibration Alarm can be used to replace alarm sounds in the Countdown Alarm,
Stopwatch, and Alarm Modes.
x All explanations in this manual use expressions such as “sounds the alarm” for
alarm operations. When the Vibration Alarm is turned on, these expressions should
be understood to mean “causes the watch to vibrate”.
x Watches with a metal band may produce a noise when a vibration operation
is performed. This is due to vibration of the metal band, and does not indicate
malfunction of the watch.
Operation Guide 3463
E-24
Dual Time
Other: LED (light-emitting diode); Vibration alarm
Battery: One lithium battery (Type: CR2032)
Battery life: 10 years under the following conditions
xOne 2-second light operation per day
xOne alarm operation per day
Note: One alarm operation is 20-second audible alarm or 10-second vibration
alarm.
Specifi cations are subject to change without notice.
E-23
Specifi cations
Accuracy at normal temperature:
±
30 seconds a month
Timekeeping: Hour, minutes, seconds, pm ( ), day of the week, month, dayP
Time format: 12-hour and 24-hour formats
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Countdown Alarm
Measuring unit: 1/10 second
Input range: 1 second to 24 hours
Stopwatch
Measuring unit: 1/100 second
Measuring capacity: 23 hours 59 minutes, 59.99 seconds
Measuring modes: Elapsed time, split time and two fi nishes
Other: Auto-Start
Alarm: Daily alarm, hourly time signal
E-22
4. After you set the time, press to return to the Dual Time Mode.A
x In the Dual Time Mode, the seconds count is synchronized with the seconds count
of the Timekeeping Mode.
x In the Dual Time Mode, press to toggle between the 12-hour and 24-hour B
formats.
E-21
Dual Time Mode
The Dual Time Mode lets you keep track of the time in
another time zone. You can also select the timekeeping
format (12-hour or 24-hour) separately from the
Timekeeping Mode.
To set the Dual Time
1. Hold down while in the Dual Time Mode. The hour A
digits fl ash on the display because they are .selected
2. Press to change the selection in the following C
sequence.
Hour Minutes
C
3. Press to increase the selected digits and to D B
decrease them. Holding down either button changes
the selection at high speed.
Current time
Mode indicator
Minutes
Hour
E-20
To test the alarm sound
Hold down while in the Alarm Mode to sound the alarm.B
x Note that pressing also changes the alarm and the hourly time signal ON/OFF B
settings.

Produktspecifikationer

Varumärke: Casio
Kategori: Titta
Modell: Collection TRT-110H-2AVEF

Behöver du hjälp?

Om du behöver hjälp med Casio Collection TRT-110H-2AVEF ställ en fråga nedan och andra användare kommer att svara dig




Titta Casio Manualer

Titta Manualer

Nyaste Titta Manualer