Casio Edifice Classic EFR-552D-1AV Bruksanvisning
Läs nedan 📖 manual på svenska för Casio Edifice Classic EFR-552D-1AV (1 sidor) i kategorin Titta. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/1
Using the Stopwatch
The stopwatch lets you measure elapsed time up to 11 hours, 59 minutes, 59 seconds.
You can also correct the position of the stopwatch second hand when necessary.
•The illustration shows a time of 2 hours, 20 minutes, 40 seconds.
•Do not try to perform stopwatch operations while the crown is pulled out either to
the first or second click. If you try to press a button, you might accidentally cause
the crown to rotate and change the current time or day setting.
To measure elapsed time
1. Press to start the stopwatch.A
2. Press A to stop the stopwatch.
•You can resume the measurement operation by pressing again.A
3. Press B to reset the stopwatch.
Adjusting the Stopwatch Second Position
Use of the stopwatch can cause the starting positions of the stopwatch minute hand
and second hand to become misaligned. Use the following procedures to check hand
alignment and to adjust the positions of the hands so they point to 12 o’clock when
the stopwatch is reset.
To adjust the positions of the stopwatch hands
1. Press to reset the stopwatch, and check the alignment of the stopwatch minuteB
hand and second hand.
2. Pull out the crown to the second click.
3. Press A to move the stopwatch second hand forward until it points to 12 o’clock.
4. If the stopwatch minute hand is aligned correctly, proceed to step 5. If the
stopwatch hour hand and stopwatch minute hand are also misaligned, press
B so
the stopwatch minute hand jumps to 0.
5. After making the adjustments you want, push the crown back in to its normal position.
•Note that pulling the crown out also stops the timekeeping second hand. After
performing the above procedure, you should also adjust the timekeeping setting.
To set the time
1. Pull out the crown to the second click.
•This causes the second hand to stop.
2. Set the hands by rotating the crown.
Move the minute hand four or five
minutes past the time you want to
set, and then back it up to the proper
setting.
3.
Push the crown back in to the normal
position to restart timekeeping.
To set the day
1. Pull out the crown to the first click.
2. Set the day by rotating the crown.
3. Push the crown back in to the normal
position.
•Avoid setting the day between 9:00
p.m. and 1:00 a.m. (the day display
may not change in the following day).
�For a watch with an elapsed time bezel
Rotate the elapsed time bezel to align the mark with the
minute hand.
After certain amount of time elapsed, read the graduation on
the elapsed time bezel which the minute hand points to.
The elapsed time is indicated.
•Some water resistant models are equipped with a screw lock
crown.
•With such models, you must unscrew the crown in the
direction noted in the illustration to loosen it before you can
pull it out. Do not pull too forcibly on such crowns.
•Also note that such watches are not water resistant while
their crowns are loosened. Be sure to screw the crowns
back in as far as they will go after making any setting.
Specifications
Accuracy at normal temperature: ± 20 seconds a month
Display: 3 analog hands (timekeeping hour and minutes, stopwatch seconds),
3 dials (timekeeping seconds, stopwatch hours and minutes), day
Stopwatch function: Measuring capacity: 11:59'59''/Measuring unit: 1 second
Measuring modes: Elapsed time
Battery: One silver oxide battery (Type: SR927W)
Approximately 2 years on type SR927W (assuming one stopwatch operation 60 min./day)
50
40
30
20
10
Elapsed time bezel
ENGLISH
•Be sure to keep all user documentation handy for future reference.
•Your watch may differ somewhat from the one shown in the illustration.
Stopwatch hours
Hour
Stopwatch minutes
Minutes
Crown
(normal position)
Day
Seconds
Stopwatch seconds
First click
(setting day)
Second click
(setting time)
Operating Precautions
Water Resistance
•The following applies to watches with WATER RESIST or WATER RESISTANT marked
on the back cover.
Marking
Example of
Daily Use
10
Atmospheres
10BAR
Yes
Yes
Yes
Yes
20
Atmospheres
20BAR
Yes
Yes
Yes
Yes
5
Atmospheres
5BAR
Yes
Yes
No
No
No
BAR mark
Yes
No
No
No
Enhanced Water Resistance Under
Daily Use
On watch front or
on back cover
Hand washing, rain
Water-related work, swimming
Windsurfing
Skin diving
Water
Resistance
Under Daily
Use
•Do not use this watch for scuba diving or other types of diving that requires air tanks.
•Watches that do not have WATER RESIST or WATER RESISTANT marked on the back
cover are not protected against the effects of sweat. Avoid using such a watch under
conditions where it will be exposed to large amounts of sweat or moisture, or to direct
splashing with water.
•Even if a watch is water-resistant, do not operate its buttons or crown while it is
submersed in water or wet.
•Even if a watch is water-resistant, avoid wearing it in the bath or in areas where
detergents (soap, shampoo, etc.) are being used. Such conditions can reduce water
resistance.
•After submersion in seawater, use plain water to rinse all salt and dirt from the watch.
•In order to maintain water resistance, have the gaskets of your watch replace periodically
(about once every two or three years).
•A trained technician will know how to check your watch for proper water resistance
whenever you have its battery replaced. Battery replacement requires the use of special
tools. Always request battery replacement from your original retailer or from an
authorized CASIO Service Center.
•Some water-resistant watches come with fashionable leather bands. Avoid swimming,
washing, or any other activity that causes direct exposure of a leather band to water.
•The inside surface of the watch glass may fog when the watch is exposed to a sudden
drop in temperature. No problem is indicated if the fogging clears up relatively quickly. If
the fogging does not clear or if water has gotten into the watch, take the watch in for
repair immediately.
•Continued use of the watch with water inside can result in damage to electronic and
mechanical components, the face of the watch, etc.
Band
•Tightening the band too tightly can cause you to sweat and make it hard for air to pass
under the band, which can lead to skin irritation. Do not fasten the band too tightly. There
should be enough room between the band and your wrist so you can insert your finger.
•Deterioration, rust, or corrosion of the band can cause it to break, which may result in the
watch falling off your wrist and becoming lost. Be sure to take good care of the band and
keep it clean. Should you notice any breakage, discoloration, looseness or other problem
with the band, immediately contact your original retailer or an authorized CASIO Service
Center to have it checked, repaired, or replaced. Note that you will be charged for any
repair or replacement of the band.
Temperature
•Never leave the watch on the dashboard of a car, near a heater, or in any other location
that is subject to very high temperatures. Do not leave the watch where it will be exposed
to very low temperatures, either. Temperature extremes can cause the watch to lose or
gain time, to stop, or otherwise malfunction.
Impact
•Your watch is designed to withstand impact incurred during normal daily use and light
activity such as playing catch, tennis, etc. Dropping the watch or otherwise subjecting it
to strong impact, however, can lead to malfunction.
Note that watches with shock-resistant designs (G-SHOCK, Baby-G, G-ms) can be worn
while operating a chain saw or engaging in other activities that generate strong vibration,
or while engage in strenuous sports activities (motocross, etc.).
Magnetism
•The hands of analog and combination (analog-digital) watches are moved by a motor that
uses magnetic force. When such a watch is close to a device (audio speakers, magnetic
necklace, cell phone, etc.) that emits strong magnetism, the magnetism can cause
timekeeping to slow down, speed up, or stop, resulting in the incorrect time being
displayed.
Electrostatic Charge
•Exposure to very strong electrostatic charge can cause the watch to display the wrong
time. Very strong electrostatic charge even can damage electronic components.
Chemicals
•Do not allow the watch to come into contact with thinner, gasoline, solvents, oils, or fats,
or with any cleaners, adhesives, paints, medicines, or cosmetics that contain such
ingredients. Doing so can cause discoloration of or damage to the case, resin band,
leather band, and other parts.
Storage
•If you do not plan to use the watch for a long time, wipe it thoroughly free of all dirt,
sweat, and moisture, and store it in a cool, dry place.
Resin Components
•Allowing the watch to remain in contact with other items or storing it together with other
items for long periods while it is wet can cause the color of the other items to transfer to
the resin components of the watch. Be sure to dry off the watch thoroughly before storing
it and make sure it is not in contact with other items.
•Leaving the watch where it is exposed to direct sunlight (ultraviolet rays) for long periods
or failure to clean dirt from the watch for long periods can cause it to become discolored.
•Friction caused by certain conditions (frequent external force, sustained rubbing, impact,
etc.) can cause discoloration of painted components.
•If there are printed figures on the band, strong rubbing of the printed area can cause
discoloration.
•Failure to clean dirt from the watch for long periods can cause fluorescent color to fade.
Wash dirt off with water as soon as possible and then dry the watch.
•Semi-transparent resin parts can become discolored due to sweat and dirt, and if
exposed to high temperatures for long periods.
•Contact an authorized CASIO Service Center to have resin components replaced. Note
that you will be charged for replacement costs.
Natural Leather and Imitation Leather Bands
•Allowing the watch to remain in contact with other items or storing it together with other
items while it is wet for long periods can cause the color of the other items to transfer to
the natural leather or imitation leather band of the watch. Be sure to dry off the watch
thoroughly before storing it and make sure it is not in contact with other items.
•Leaving a leather band where it is exposed to direct sunlight (ultraviolet rays) for long
periods or failure to clean dirt from a leather band for long periods can cause it to
become discolored.
Important!
•Subjecting a natural leather or imitation leather band to rubbing or dirt can cause color
transfer and discoloration.
Metal Components
•Failure to clean dirt from a metal band can lead to formation of rust, even if the band is
stainless steel or plated. If the watch is exposed to sweat or water, wipe it thoroughly with
a soft, absorbent cloth and then store it in a well-ventilated location to dry.
•To clean the band, use a soft toothbrush or similar tool to scrub it with a weak solution of
water and a mild neutral detergent. Take care to avoid getting solution on the watch case.
Bacteria and Odor Resistant Band
•The bacteria and odor resistant band protects against odor generated by the formation of
bacteria from sweat, which ensures good comfort and hygiene. In order to ensure
maximum bacteria and odor resistance, keep the band clean. Use an absorbent soft cloth
to wipe the band clean of dirt, sweat, and moisture. The bacteria and odor resistant band
suppresses the formation of organisms and bacteria. It does not protect against rash due
to allergic reaction, etc.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage
or loss suffered by you or any third party arising through the use of this product or its
malfunction.
User Maintenance
Caring for Your Watch
•A dirty or rusty case or band can soil the sleeve of your clothing, cause skin irritation, and
even interfere with watch performance. Be sure to keep the case and band clean at all
times. Rust tends to form easily after the watch is exposed to seawater and then left
without cleaning.
•Sometimes a smudge like pattern may appear on the surface of a resin band. This will
not have any affect on your skin or clothing. Wipe the band with a cloth to clean it.
•Keep a leather band clean by wiping it with a dry cloth. Both resin bands and leather
band can become worn and cracked over time when subjected to normal daily use.
•Should your band become badly cracked or worn, be sure to have it replaced with a new
one. Request band replacement from your original retailer or an authorized CASIO
Service Center. Note that you will be charged for band replacement costs, even if your
watch is still covered by its warranty.
•Remember that you wear your watch next to your skin, just like a piece of clothing.
Because of this, you should always keep your watch clean. Use a soft, absorbent cloth to
wipe off any dirt, sweat, water, or other foreign matter from the case and band.
Dangers of Poor Watch Care
Rust
•Though the stainless steel used for the watch is highly rust-resistant, rust can form if the
watch is not cleaned after it becomes dirty. Failure of oxygen to come into contact with
the metal because it is dirty causes breakdown of the oxidization layer on the metal
surface, which leads to the formation of rust.
•Even if the surface of the metal appears clean, sweat and rust in crevasses can soil the
sleeves of clothing, cause skin irritation, and even interfere with watch performance.
Premature Wear
•Leaving sweat or water on a resin band or storing it an area subject to high moisture can
lead to premature wear, cuts, and breaks.
Skin Irritation
•Individuals with sensitive skin or in poor physical condition may experience skin irritation
when wearing a watch. Such individuals should keep their leather band or resin band
particularly clean, or switch to a metal band. Should you ever experience a rash or other
skin irritation, immediately remove the watch and contact a skin care professional.
Battery Replacement
•Leave battery replacement up to your original retailer or authorized CASIO Service
Center.
•Have the battery replaced only with the type specified by in this manual. Use of another
type of battery can cause malfunction.
•When replacing the battery, also request a check for proper water resistance. Note that
you will be charged separately for water resistance inspection.
Initial Battery
•The battery that comes loaded in your watch when you purchase it is used for function
and performance testing at the factory.
•This type of test battery may go dead quicker than the normally rated battery life as noted
in the User’s Guide. Note that you will be charged for replacement of this battery, even if
replacement is required within the watch’s warranty period.
Low Battery Power
•Low battery power is indicated by large timekeeping error, when display contents are
dim, or when the display does blank.
•Operation while battery power is low can result in malfunction. Replace the battery as
soon as possible.
MA0904-EA
Produktspecifikationer
| Varumärke: | Casio |
| Kategori: | Titta |
| Modell: | Edifice Classic EFR-552D-1AV |
Behöver du hjälp?
Om du behöver hjälp med Casio Edifice Classic EFR-552D-1AV ställ en fråga nedan och andra användare kommer att svara dig
Titta Casio Manualer
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
Titta Manualer
- Titta IKEA
- Titta Huawei
- Titta Braun
- Titta Epson
- Titta Garmin
- Titta Medion
- Titta Ade
- Titta Adidas
- Titta Alpina
- Titta Armani
- Titta Ascot
- Titta Invicta
- Titta Skmei
- Titta Suunto
- Titta Alessi
- Titta Omega
- Titta Nedis
- Titta Timex
- Titta Lotus
- Titta Lars Larsen
- Titta Orient
- Titta Calypso
- Titta Renkforce
- Titta Bushnell
- Titta Olivia Burton
- Titta Victorinox
- Titta Lambretta
- Titta Tudor
- Titta Holzkern
- Titta Hublot
- Titta Ebel
- Titta Christopher Ward
- Titta Edox
- Titta Gc
- Titta So & Co
- Titta Diesel
- Titta Tissot
- Titta Lorus
- Titta Stuhrling
- Titta Swatch
- Titta Citizen
- Titta Luminox
- Titta Festina
- Titta Emporio Armani
- Titta Girard-Perregaux
- Titta TMI
- Titta Mitsubishi
- Titta Velleman
- Titta Detomaso
- Titta La Crosse Technology
- Titta Skagen
- Titta Marquant
- Titta Dugena
- Titta Rolex
- Titta Seiko
- Titta Fitbit
- Titta Auriol
- Titta ETA
- Titta TW Steel
- Titta Breitling
- Titta Timberland
- Titta Spinnaker
- Titta Jaguar
- Titta Pulsar
- Titta Pilgrim
- Titta Davis
- Titta Boss
- Titta Habitat
- Titta Clas Ohlson
- Titta TomTom
- Titta Irox
- Titta Michael Kors
- Titta ELYSEE
- Titta Zenith
- Titta Danish Design
- Titta Daniel Steiger
- Titta Torgoen
- Titta WoodWatch
- Titta Executive
- Titta Tommy Hilfiger
- Titta Nautica
- Titta Obaku
- Titta Hugo Boss
- Titta Fossil
- Titta Shinola
- Titta Spin Master
- Titta Krontaler
- Titta Lucien Picard
- Titta Swiza
- Titta Mondaine
- Titta Geemarc
- Titta Ticwatch
- Titta Bering
- Titta Leff
- Titta Lynx
- Titta Maurice Lacroix
- Titta ICE Watch
- Titta Eurochron
- Titta La Crosse
- Titta Rado
- Titta Puma
- Titta Gant
- Titta Just
- Titta Sempre
- Titta IWC
- Titta Digi-tech
- Titta Oregon Scientific
- Titta Misfit
- Titta Breo
- Titta BML
- Titta Inter-Quartz
- Titta Haffstreuner
- Titta Hamilton
- Titta Longines
- Titta Junghans
- Titta Meister Anker
- Titta Naitica
- Titta Kogan
- Titta Guess
- Titta ESQ
- Titta ETT
- Titta Raketa
- Titta Marc Jacobs
- Titta Julie Julsen
- Titta Xonix
- Titta KRAEK
- Titta World Timer Chronograph
- Titta Ferrari
- Titta Rodania
- Titta Bruno Sohnle
- Titta Fromanteel
- Titta MICHELE
- Titta Philip Watch
- Titta QQ
- Titta Fila
- Titta Ronda
- Titta TimeStyle
- Titta Radley London
- Titta PANERAI
- Titta Prologue
- Titta Zeppelin
- Titta Hype
- Titta HYT
- Titta Grand Seiko
Nyaste Titta Manualer
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
26 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
22 Oktober 2024
21 Oktober 2024
21 Oktober 2024