Casio EFR-540D-1AV Bruksanvisning

Casio Titta EFR-540D-1AV

Läs nedan 📖 manual på svenska för Casio EFR-540D-1AV (1 sidor) i kategorin Titta. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
1
Operation Guide 5276
MA1306-EC
To change the day indicator setting
To adjust the time setting
Pull the out to Click 1. Crown
Push the back in. Crown
Push the back in. Crown
Rotate the to change the Crown
time setting.
When the second hand is at
12 o’clock, pull the Crown out to
Click 2.
Rotate the away from you Crown
to set the day.
Note
Take care that you set the correct AM
or PM time.
When changing the time, move the
minute hand four or fi ve minutes past
your fi nal setting, and then back it up
to the setting you want.
Note
The day indicator setting uses a 31-
day month. Make adjustments for
months of shorter lengths.
Avoid changing the day indicator
setting between the hours of 9
p.m. and 1 a.m. Otherwise, the day
indicator may not change correctly at
midnight.
Stopwatch functions
Crown Operations
Some water-resistant models (100 meters, 200 meters)
have a screw-in crown. When you need to perform a crown
operation, rotate it towards you to unscrew it. Then pull
the crown out. Avoid applying undue force when pulling.
The watch loses its water resistance while the crown is
unscrewed. After performing a crown operation, fully screw
the crown back in.
Crown
Loosen
If your watch has a rotary bezel...
You can rotate the bezel to align its mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the mark.
Start
Elapsed time
Current
Your watch may differ somewhat from the one shown in the illustration.
Some models may use a combination of hands and rotating disks to indicate
information. The word “hand” in this section is used to mean both analog hands
and rotating disks.
Using the Stopwatch
Elapsed time
A A A A B
Start Stop Re-start Stop Reset
Split time
A B B A B
Start Split Split release Stop Reset
Two nishes
A B A B B
Start Split
First runner
nishes.
Display time of
rst runner.
Stop
Second runner
nishes.
Split release
Display time of
second runner.
Reset
Important!
Do not operate the stopwatch with the crown pulled out.
Note
The stopwatch 1/20-second hand will move for 10 minutes after you start an
elapsed time operation. After that, it will stop at 0. When you stop the elapsed time
operation, the 1/20-second hand will move to the 1/20-second reading for the
current elapsed time.
The stopwatch measures elapsed time in 1/20-second increments up to 11 hours,
59 minutes, 59.95 seconds.
Perform the following procedure if the stopwatch hands do not return to their 0 (zero)
positions when you reset the stopwatch.
Use the A button to select the hand whose zero position you want to correct. Each
time you hold down A for about two seconds in the following procedure, it cycles to
the next hand to be corrected.
Use the button in the following procedure to correct the 0 position of the currently B
selected hand. Holding down moves the current hand at high speed.B
Correcting the 0 Positions of the Hands
Operational Flow
Pull the Crown out to Click 2.
Hold down A for about two seconds, the Stopwatch 1/20-second Hand will
rotate to indicate the 1/20-second hand setting mode.
If the hand does not align with 00, use the
B button to adjust it.
Hold down A for about two seconds, the Stopwatch Second Hand will rotate
to indicate the second hand setting mode.
If the hand does not align with 12 o’clock, use the
B button to adjust it.
Hold down A for about two seconds, the Stopwatch Hour Hand and
Stopwatch Minute Hand will rotate to indicate the hour hand and minute hand
setting mode.
If the hands do not align with 0 hours and 0 minutes, use the
B button to adjust
them.
After all of the hands are the way you want, push the back in. Crown
Important!
Timekeeping stops while the crown is pulled out. Correct the current time setting
after performing the above operation.

Second Hand
Day Indicator
Click 2Click 1
Hour Hand Minute Hand
A
B
Stopwatch 1/20-second Hand
Stopwatch Second Hand
Stopwatch Hour Hand
Crown
Stopwatch Minute Hand
Ú
#!3)/#/-054%2#/,4$
Speci cations
Accuracy: ±20 seconds average per month
Stopwatch: Measuring Capacity: 11:59'59.95" (12 hours)
Measuring Unit: 1/20 second
Measurements: Elapsed time; split time; two nishes
Battery: One silver oxide battery (Type: SR927SW)
Battery Life: Approximately 3 years (2 hours stopwatch operation per day)
Low Battery Indicator: Second hand moves in 2-second increments when power
is low.

Produktspecifikationer

Varumärke: Casio
Kategori: Titta
Modell: EFR-540D-1AV
Färg på produkten: Zwart
Vikt: 4500 g
Bredd: 430 mm
Djup: 305 mm
Höjd: 44 mm
Förpackningens vikt: 5500 g
Snäll: MP3 speler
LED-indikatorer: Stroom
Pekskärm: Nee
Minneskortets maximala kapacitet: 32 GB
Kontinuerlig ljuduppspelningstid: - uur
Ljudformat som stöds: MP3, WMA
USB-kontakttyp: USB Type-A
Integrerad minneskortläsare: Ja
Kompatibla minneskort: SD
Volymkontroll: Digitaal
FM-radio: Nee
Minneskapacitet för musik: 9999
Anslutning för nätadapter: Ja
Gränssnitt: USB 2.0
Inbyggd kamera: Nee
Impedans: 1000 Ohm
Uppspelningslägen: Fast backward, Fast forward, Random, Repeat, Repeat all, Repeat one
USB-anslutning: Ja
Total lagringskapacitet: - GB
Uppladdningsbar: Ja
Frekvensomfång: 20 - 20000 Hz
Signal-brusförhållande: 90 dB
MP3-bitsnelheden: 32 - 320 Kbit/s
Koptelefoon: Nee
Frekvensband som stöds: Niet ondersteund
Total harmonisk distorsion (THD): 0.05 procent
Andra kameran: Nee
Typ av lagringsmedium: Flashgeheugen
Videogeheugen capaciteit: - uur
Drifttemperatur (TT): 10 - 40 °C
Relativ luftfuktighet i drift (VV): 10 - 80 procent
Filsystem som stöds: FAT32

Behöver du hjälp?

Om du behöver hjälp med Casio EFR-540D-1AV ställ en fråga nedan och andra användare kommer att svara dig




Titta Casio Manualer

Titta Manualer

Nyaste Titta Manualer