Casio FE10-1A Bruksanvisning

Casio Titta FE10-1A

Läs nedan 📖 manual på svenska för Casio FE10-1A (1 sidor) i kategorin Titta. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

USER’S GUIDE 2428

•After you perform an operation in any mode, pressing returns to theB

Timekeeping Mode.

General Guide

The operational procedures for Modules 2428 and 2470 are identical. All of the

illustrations in this manual show Module 2428.

•Press B to change from mode to mode. Each mode is explained in detail on

the following pages.

[Module 2470] [Module 2428]

Timekeeping Mode Time Setting ModeStopwatch ModeAlarm Mode

Press .

Backlight Precautions

The backlight uses an EL (electro-luminescent) panel that causes the entire

display to glow for easy reading in the dark.

•The electro-luminescent panel that provides illumination loses power after

very long use.

•The illumination provided by the backlight may be hard to see when viewed

under direct sunlight.

•The watch may emit an audible sound whenever the display is illuminated.

This is due to vibration of the EL panel used for illumination, and does not

indicate malfunction.

•Frequent use of the backlight shortens the battery life.

Timekeeping Mode

•In the Timekeeping Mode, press C to switch

between the 12-hour and 24-hour formats.

•In the Timekeeping Mode, press to illuminate theA

display for a few seconds.

•Day of the week is displayed as follows.

SU: Sunday MO: Monday

TU: Tuesday WE: Wednesday

TH: Thursday F R : Friday

SA: Saturday

Day of the week

Day

Hour

PM indicator

Minutes

Seconds

Alarm Mode

When the Daily Alarm is switched on, the alarm

sounds for 20 seconds at the preset time each day.

When the Hourly Time Signal is switched on, the

watch beeps every hour on the hour.

To set the alarm time

1. Hold down A while in the Alarm Mode until the

hour digits start to flash on the display. The hour

digits flash because they are

selected

2. Press A to change the selection in the following

sequence.

•Pressing A also illuminates the display.

Hour Minutes

Normal Alarm Mode (No digit flashes)

•Once you reach the normal Alarm Mode, you have to hold down againA

until the hour digits start to flash.

3. Press C to increase the selected digits. Holding down changes theC

number at high speed.

•The format (12-hour and 24-hour) of the alarm time matches the format you

select for normal timekeeping.

•When setting the alarm time using the 12-hour format, take care to set the

time correctly as morning or afternoon (PM).

4. After you set the alarm time, press to return to the Alarm Mode. At thisA

time the Daily Alarm is switched on automatically.

To stop the alarm

Press to stop the alarm after it starts to sound.A

Hourly time

signal on

indicator

Mode indicator

Hour

Alarm on

indicator

Minutes

To switch the Daily Alarm and Hourly Time Signal on and off

Press C while in the Alarm Mode to change the status of the Daily Alarm and

Hourly Time Signal in the following sequence.

[Alarm on Indicator/Hourly Time Signal on Indicator]

Hourly Time

Signal only

Daily Alarm

only

Both offBoth on

To test the alarm

Hold down while in the Alarm Mode to sound the alarm.C

Stopwatch Mode

The Stopwatch Mode lets you measure elapsed time,

split times, and two finishes. The range of the

stopwatch is 59 minutes, 59.99 seconds.

Mode Indicator

Split time

indicator

Minutes Seconds

1/100 second

(a) Elapsed time measurement

Start Stop Re-start Stop Clear

Start Split Split release Stop Clear

Start Split Stop Split release Clear

(b) Split time measurement

First runner

finishes.

Second runner

finishes.

Record time of

first runner.

Record time of

second runner.

Time Setting Mode

To set the time and date

1.Use B to enter the Time Setting Mode.

•The second’s digits flash because they are

selected.

2.Press A to change the selection in the following

sequence.

•Pressing A also illuminates the display.

Seconds Hour Minutes

Day of week Day Month

Day of the week

Day

Hour Minutes

Seconds

PM indicator

3. While the second’s digits are selected (flashing), press to reset theC

seconds to “00”. If you press while the second’s count is in the range ofC

30 to 59, the seconds are reset to “00” and 1 is added to the minutes. If the

second’s count is in the range of 00 to 29, the minute’s count is unchanged.

4. While any other digits (besides seconds) are selected (flashing), press C to

increase the number. While the day of the week is selected, pressing C

advances to the next day. Holding down changes the current selection atC

high speed.

5. After you set the time and date, press to return to the Timekeeping Mode.B

•If you do not operate any button for a few minutes while a selection is

flashing, the flashing stops and the watch goes back to the Timekeeping

Mode automatically.

Produktspecifikationer

Varumärke:	Casio
Kategori:	Titta
Modell:	FE10-1A
Färg på produkten:	Zwart
Inbyggd display:	Nee
Vikt:	550 g
Bredd:	100 mm
Djup:	110 mm
Höjd:	60 mm
Antal lampor:	4 lampen
Kraftkälla:	AC
Fjärrkontroll:	IR
Inspänning:	100 - 240 V
siffra:	1
Färg ljus:	Blue, Green, Red, White
Frekvens:	50 Hz
Lämplig för inomhusbruk:	Ja
Typ produkt:	Disco-laserprojector & stroboscoop
Baldiameter:	- "
Laservåglängd (röd):	650 nm
Laservåglängd (grön):	532 nm
Laservågkraft (röd):	100 mW
Laservågkraft (grön):	50 mW
Gobo mönster kvantitet:	32
Inbyggt handtag:	Ja