Casio G-Shock GMD-S6900SR-7ER Bruksanvisning
Läs nedan 📖 manual på svenska för Casio G-Shock GMD-S6900SR-7ER (11 sidor) i kategorin Titta. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/11
Operation Guide 3436
E-9
x When DST is turned on, the UTC offset setting range is –11.0 to +15.0, in
0.5-hour units.
x For information about Flash Alert, see “Flash Alert” (page E-32).
4. Press to exit the setting screen.A
x The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
E-8
3. When the setting you want to change is fl ashing, use and to change it as D B
described below.
Screen To do this: Do this:
Reset the seconds to
Press .D
Toggle between Daylight Saving Time
( ) and Standard Time ( )
Specify the UTC offset
Use (+) and (–).D B
Change the hour or minutes
Change the year
Change the month or day
x See “Daylight Saving Time (DST)” on page E-9 for details about DST setting.
x For details about the UTC offset, see the “City Code Table” at the back of this
manual.
xThe UTC offset setting range is –12.0 to +14.0, in 0.5-hour units.
E-7
To set the time and date
1. In the Timekeeping Mode, hold down until the A
seconds start to fl ash, which indicates the setting
screen.
2. Press to move the fl ashing in the sequence shown C
below to select other settings.
Seconds DST UTC Offset
YearDayFlash Alert
C C
C C
C
Hour
Minutes
C
C
C
Month
C
Seconds
E-6
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select the UTC offset before you set the time and date.
Month – Day
Day of week
PM indicator
Hour : Minutes Seconds
E-5
C C
C
Stopwatch Mode Countdown Timer
Mode
Alarm Mode
E-4
General Guide
x Press to change from mode to mode.C
x In any mode, press to illuminate the display.L
C
Timekeeping Mode World Time Mode
C
E-3
To test the alarm .................................................................................................... E-27
To turn an alarm on and off .................................................................................. E-28
To turn the Hourly Time Signal on and off .......................................................... E-29
To illuminate the display ....................................................................................... E-30
To specify the illumination duration .................................................................... E-30
To turn Flash Alert on and off .............................................................................. E-32
To turn the button operation tone on and off ..................................................... E-33
E-2
To set the time and date ......................................................................................... E-7
To toggle the Timekeeping Mode time between DST and Standard Time ....... E-10
To toggle between 12-hour and 24-hour timekeeping ....................................... E-11
To view the time for another city code ................................................................ E-12
To toggle a city code time
between Standard Time and Daylight Saving Time ........................................ E-13
To measure times with the stopwatch ................................................................. E-15
To use Auto-Start .................................................................................................. E-16
To confi gure the countdown timer ...................................................................... E-20
To use the countdown timer ................................................................................. E-22
To set an alarm time .............................................................................................. E-25
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
E-1
Contents
General Guide ..........................................................................................................E-4
Timekeeping ............................................................................................................. E-6
World Time .............................................................................................................E-12
Stopwatch ..............................................................................................................E-14
Countdown Timer ..................................................................................................E-17
Alarms .................................................................................................................... E-23
Illumination ............................................................................................................ E-30
Reference ............................................................................................................... E-31
Specifi cations ........................................................................................................E-37
About This Manual
x Depending on the model of your watch, display text appears
either as dark fi gures on a light background or light fi gures
on a dark background. All sample displays in this manual are
shown using dark fi gures on a light background.
x Button operations are indicated using the letters shown in
the illustration.
x Each section of this manual provides you with the information
you need to perform operations in each mode. Further details
and technical information can be found in the “Reference”
section.
E
MA1405-EA © 2014 CASIO COMPUTER CO., LTD.
Operation Guide 3436
E-19
Countdown End Beeper
The countdown end beeper lets you know when the countdown reaches zero.
x When the progress beeper is turned off, the countdown end beeper sounds for
about 10 seconds, or until you press any button to stop it.
x When the progress beeper is turned on, the countdown end beeper sounds for
about one second.
Progress Beeper
When the progress beeper is turned on, the watch uses beeps to signal countdown
progress as described below.
x Starting from fi ve minutes before the end of the countdown, the watch emits four
short beeps at the top of each countdown minute.
x 30 seconds before the end of the countdown, the watch emits four short beeps.
x The watch emits a short beep for each of the last 10 seconds of the countdown.
x If the countdown start time is six minutes or greater, the watch emits a short beep
for each second of the fi nal 10 seconds before the fi ve-minute point is reached. Four
short beeps are emitted to signal when the fi ve-minute point is reached.
E-18
Auto-repeat
When auto-repeat is turned on, the countdown restarts automatically from the
countdown start time when it reaches zero.
When auto-repeat is turned off, the countdown stops when it reaches zero and the
display shows the original countdown start time.
x Pressing while an auto-repeat countdown is in progress pauses the current D
countdown. You can resume the auto-repeat countdown by pressing , or you can D
press to reset to the countdown time starting value.B
Countdown Timer Beeper Operations
The watch beeps at various times during a countdown so you can keep informed
about the countdown status without looking at the display. The following describes the
types of beeper operations the watch performs during a countdown.
E-17
Countdown Timer
The countdown timer can be set within a range of one
minute to 24 hours. An alarm sounds when the countdown
reaches zero. The countdown timer also has an auto-
repeat feature and a progress beeper that signals the
progress of the countdown.
x All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-5).
Confi guring the Countdown Timer
The following are the settings you should confi gure before
actually using the countdown timer.
Countdown start time; Auto-repeat on/off; Progress beeper
on/off
x See “To confi gure the countdown timer” (page E-20) for
information about setting up the timer.
Seconds
Hours : Minutes
E-16
About Auto-Start
With Auto-Start, the watch performs a 5-second countdown, and stopwatch operation
starts automatically when the countdown reaches zero.
During the fi nal three seconds of the countdown, a beeper sounds with each second.
To use Auto-Start
1. While the stopwatch screen is showing all zeros in the
Stopwatch Mode, press .B
x This displays a 5-second countdown screen.
x To return to the all zeros screen, press again.B
2. Press to start the countdown.D
x When the countdown reaches zero, a tone sounds and a
stopwatch timing operation starts automatically.
x Pressing while the Auto-Start countdown is in D
progress starts the stopwatch immediately.
E-15
To measure times with the stopwatch
Elapsed time
DDDDB
Start Stop Resume Stop Clear
Split time
DBBDB
Start Split
( displayed)SPL
Split release Stop Clear
Two Finishes
DBDBB
Start Split
First runner
fi nishes.
Display time of
fi rst runner.
Stop
Second runner
fi nishes.
Split release
Display time of
second runner.
Clear
E-14
Stopwatch
The stopwatch lets you measure elapsed time, split times,
and two fi nishes. It also includes Auto-Start.
x The display range of the stopwatch is 23 hours,
59 minutes, 59.99 seconds.
x The stopwatch continues to run, restarting from zero after
it reaches its limit, until you stop it.
x The stopwatch measurement operation continues even if
you exit the Stopwatch Mode.
x Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to elapsed
time measurement.
x All of the operations in this section are performed in
the Stopwatch Mode, which you enter by pressing C
(page E-5).
1/100 second
Hours : Minutes
Seconds
E-13
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use and to display the D B
city code (time zone) whose Standard Time/Daylight
Saving Time setting you want to change.
2. Hold down for about one second to toggle Daylight A
Saving Time ( indicator displayed) and Standard DST
Time ( indicator not displayed).DST
x The indicator is on the display whenever you display DST
a city code for which Daylight Saving Time is turned on.
x Note that the DST/Standard Time setting affects only
the currently displayed city code. Other city codes are
not affected.
DST indicator
E-12
World Time
World Time shows the current time in 48 cities (29 time
zones) around the world.
x All of the operations in this section are performed in
the World Time Mode, which you enter by pressing C
(page E-4).
To view the time for another city code
In the World Time Mode, press to scroll eastwardly D
through city codes or to scroll westwardly.B
x For full information about city codes, see the “City Code
Table” at the back of this manual.
x If the current time for a city is wrong, check your
Timekeeping Mode time and the UTC offset settings and
make necessary changes.
City code
Current time and date in
the zone of the selected
city code
E-11
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press to toggle between 12-hour timekeeping and D
24-hour timekeeping.
x With the 12-hour format, the (PM) indicator appears to the left of the hour digits for P
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
E-10
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down until the A
seconds start to fl ash, which indicates the setting
screen.
2. Press to display the DST setting screen.C
3. Press to toggle between Daylight Saving Time (D
displayed) and Standard Time ( displayed).
4. Press to exit the setting screen.A
x The indicator appears on the display to indicate that DST
Daylight Saving Time is turned on.
DST indicator
Operation Guide 3436
E-29
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use to select the Hourly Time D
Signal ( ).
2. Press to toggle it on and off.A
x The Hourly Time Signal on indicator ( ) is shown on the
display in all modes while this function is turned on.
Hourly Time Signal on
indicator
E-28
To turn an alarm on and off
1. In the Alarm Mode, use and to select an alarm.D B
2. Press to toggle it on and off.A
x Turning on a alarm ( or ) displays the alarm on
indicator ( ) on its Alarm Mode screen.
x Turning on the snooze alarm ( ) displays the alarm
on indicator ( ) and snooze alarm indicator ( ) on
the Alarm Mode snooze alarm screen.
x In all modes, the alarm on indicator is shown for any
alarm that is currently turned on.
x The alarm on indicator fl ashes while the alarm is
sounding.
x The snooze alarm indicator fl ashes while the snooze
alarm is sounding and during the 5-minute intervals
between alarms.
Snooze alarm
indicator
Alarm on indicator
E-27
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the
watch is in. In the case of the snooze alarm, the alarm operation is performed a total
of seven times, every fi ve minutes, until you turn the alarm off (page E-28).
x Alarm and Hourly Time Signal operations are performed in accordance with the
Timekeeping Mode time.
x To stop the alarm tone after it starts to sound, press any button.
x Performing any one of the following operations during a 5-minute interval between
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page E-7)
Displaying the setting screen (page E-25)
To test the alarm
In the Alarm Mode, hold down to sound the alarm.D
E-26
3. Press to move the fl ashing in the sequence shown below to select other C
settings.
C C C
Hour Minutes Month Day
C
4. While a setting is fl ashing, use and to change it as described below.D B
Screen To do this: Do this:
Change the hour and
minutes
Use (+) and (–).D B
x With the 12-hour format, set the time correctly
as a.m. or p.m. ( indicator).P
x To set an alarm that does not include a month
and/or day, set for each setting.
Change the month and day
5. Press to exit the setting screen.A
E-25
To set an alarm time
1. In the Alarm Mode, use and to scroll through the D B
alarm screens until the one whose time you want to set
is displayed.
D
B
B
BD B D
D
x To set an alarm time, display the applicable alarm
screen ( , or ).
xThe snooze alarm repeats every fi ve minutes.
2. After you select an alarm, hold down until the hour A
setting of the alarm time starts to fl ash, which indicates
the setting screen.
xThis operation turns on the alarm automatically.
E-24
Alarm Types
The alarm type is determined by the settings you make, as described below.
x Daily alarm
Set the hour and minutes for the alarm time. This type of setting causes the alarm to
sound everyday at the time you set.
x Date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specifi c time, on the specifi c date you set.
x 1-Month alarm
Set the month, hour and minutes for the alarm time. This type of setting causes the
alarm to sound everyday at the time you set, only during the month you set.
x Monthly alarm
Set the day, hour and minutes for the alarm time. This type of setting causes the
alarm to sound every month at the time you set, on the day you set.
E-23
Alarms
You can set up to three independent multi-function alarms
with hour, minutes, month, and day. When an alarm is
turned on, the alarm tone sounds when the alarm time is
reached. One of the alarms is a snooze alarm. You can
also turn on an Hourly Time Signal that causes the watch
to beep twice every hour on the hour.
x The snooze alarm screen is indicated by , while the
other alarm screens are numbered and . The
Hourly Time Signal screen is indicated by .
x All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing (page E-5).C
Alarm number
Alarm date
(Month – Day)
Alarm time
(Hour : Minutes)
E-22
To use the countdown timer
Press while in the Countdown Timer Mode to start the D
countdown timer.
x The countdown timer operation continues even if you exit
the Countdown Timer Mode.
x Press while a countdown operation is in progress to D
pause it. Press again to resume the countdown.D
x To stop a countdown operation completely, fi rst pause
it (by pressing ), and then press . This returns the D B
countdown time to its starting value.
E-21
3. When the setting you want to change is fl ashing, use and to change it as D B
described below.
Setting Screen Button Operation
Hours, Minutes Use (+) and (–) to change the setting.D B
Auto-repeat Press to toggle auto-repeat on ( displayed) D
and off ( displayed).
Progress Beeper Press to toggle the progress beeper on ( ) and D
off ( ).
x To specify a countdown start time of 24 hours, set .
4. Press to exit the setting screen.A
x You can also perform steps 1 and 2 of the above procedure whenever you need to
view the current auto-repeat and progress beeper settings.
E-20
To confi gure the countdown timer
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down until the current A
countdown start time starts to fl ash, which indicates the
setting screen.
x If the countdown start time is not displayed, use the
procedure under “To use the countdown timer” (page
E-22) to display it.
2. Press to move the fl ashing in the sequence shown C
below to select other settings.
Hours Minutes
Auto-repeatProgress Beeper
C
C
C C
Produktspecifikationer
| Varumärke: | Casio |
| Kategori: | Titta |
| Modell: | G-Shock GMD-S6900SR-7ER |
Behöver du hjälp?
Om du behöver hjälp med Casio G-Shock GMD-S6900SR-7ER ställ en fråga nedan och andra användare kommer att svara dig
Titta Casio Manualer
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
Titta Manualer
- Titta IKEA
- Titta Huawei
- Titta Braun
- Titta Epson
- Titta Garmin
- Titta Medion
- Titta Ade
- Titta Adidas
- Titta Alpina
- Titta Armani
- Titta Ascot
- Titta Invicta
- Titta Skmei
- Titta Suunto
- Titta Alessi
- Titta Omega
- Titta Nedis
- Titta Timex
- Titta Lotus
- Titta Lars Larsen
- Titta Orient
- Titta Calypso
- Titta Renkforce
- Titta Bushnell
- Titta Olivia Burton
- Titta Victorinox
- Titta Lambretta
- Titta Tudor
- Titta Holzkern
- Titta Hublot
- Titta Ebel
- Titta Christopher Ward
- Titta Edox
- Titta Gc
- Titta So & Co
- Titta Diesel
- Titta Tissot
- Titta Lorus
- Titta Stuhrling
- Titta Swatch
- Titta Citizen
- Titta Luminox
- Titta Festina
- Titta Emporio Armani
- Titta Girard-Perregaux
- Titta TMI
- Titta Mitsubishi
- Titta Velleman
- Titta Detomaso
- Titta La Crosse Technology
- Titta Skagen
- Titta Marquant
- Titta Dugena
- Titta Rolex
- Titta Seiko
- Titta Fitbit
- Titta Auriol
- Titta ETA
- Titta TW Steel
- Titta Breitling
- Titta Timberland
- Titta Spinnaker
- Titta Jaguar
- Titta Pulsar
- Titta Pilgrim
- Titta Davis
- Titta Boss
- Titta Habitat
- Titta Clas Ohlson
- Titta TomTom
- Titta Irox
- Titta Michael Kors
- Titta ELYSEE
- Titta Zenith
- Titta Danish Design
- Titta Daniel Steiger
- Titta Torgoen
- Titta WoodWatch
- Titta Executive
- Titta Tommy Hilfiger
- Titta Nautica
- Titta Obaku
- Titta Hugo Boss
- Titta Fossil
- Titta Shinola
- Titta Spin Master
- Titta Krontaler
- Titta Lucien Picard
- Titta Swiza
- Titta Mondaine
- Titta Geemarc
- Titta Ticwatch
- Titta Bering
- Titta Leff
- Titta Lynx
- Titta Maurice Lacroix
- Titta ICE Watch
- Titta Eurochron
- Titta La Crosse
- Titta Rado
- Titta Puma
- Titta Gant
- Titta Just
- Titta Sempre
- Titta IWC
- Titta Digi-tech
- Titta Oregon Scientific
- Titta Misfit
- Titta Breo
- Titta BML
- Titta Inter-Quartz
- Titta Haffstreuner
- Titta Hamilton
- Titta Longines
- Titta Junghans
- Titta Meister Anker
- Titta Naitica
- Titta Kogan
- Titta Guess
- Titta ESQ
- Titta ETT
- Titta Raketa
- Titta Marc Jacobs
- Titta Julie Julsen
- Titta Xonix
- Titta KRAEK
- Titta World Timer Chronograph
- Titta Ferrari
- Titta Rodania
- Titta Bruno Sohnle
- Titta Fromanteel
- Titta MICHELE
- Titta Philip Watch
- Titta QQ
- Titta Fila
- Titta Ronda
- Titta TimeStyle
- Titta Radley London
- Titta PANERAI
- Titta Prologue
- Titta Zeppelin
- Titta Hype
- Titta HYT
- Titta Grand Seiko
Nyaste Titta Manualer
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
26 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
22 Oktober 2024
21 Oktober 2024
21 Oktober 2024