Casio Pro Trek Bruksanvisning

Casio Titta Pro Trek

Läs nedan 📖 manual på svenska för Casio Pro Trek (10 sidor) i kategorin Titta. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/10

Operation Guide 3173 3246

Congratulations upon your selection of this CASIO watch.

Applications

The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude.

Measured values are then shown on the display. Such features make this watch useful when hiking,

mountain climbing, or when engaging in other such outdoor activities.

Warning !

• The measurement functions built into this watch are not intended for taking measurements that

require professional or industrial precision. Values produced by this watch should be considered

as reasonable representations only.

• When engaging in mountain climbing or other activities in which losing your way can create a

dangerous or life-threatening situation, always use a second compass to conﬁ rm direction

readings.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss

suffered by you or any third party arising through the use of this product or its malfunction.

About This Manual

• The operational procedures for Modules 3173 and 3246 are identical. All of the illustrations in this

manual show Module 3173.

• Depending on the model of your watch, display text appears either as dark ﬁ gures on a light

background, or light ﬁ gures on a dark background. All sample displays in this manual are shown using

dark ﬁ gures on a light background.

• Button operations are indicated using the letters shown in the illustration.

• Note that the product illustrations in this manual are intended for reference only, and so the actual

product may appear somewhat different than depicted by an illustration.

Things to check before using the watch

1. Check the battery power level.

Is “H” or “M” displayed for the battery power indicator?

Go to step 2.

Power is low. Charge the watch by placing it in a location

where it is exposed to light. For details, see “Charging the

Watch”.

NO YES

YES

Does any one of the following conditions exist?

• Battery power indicator shows “

L” and “LOW” is displayed in the

upper left corner of the screen.

• “C

” is displayed in the lower left corner of the screen.

• The face is blank.

The watch is charged

sufficiently.

For details about

charging, see

“Charging the Watch”.

Battery power

indicator

2. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To conﬁ gure Home City settings” to conﬁ gure your Home City and daylight

saving time settings.

Important!

World Time Mode and Sunrise/Sunset Mode data depend on correct Home City, time, and date settings

in the Timekeeping Mode. Make sure you conﬁ gure these settings correctly.

3. Set the current time.

See “Conﬁ guring Current Time and Date Settings”.

The watch is now ready for use.

Charging the Watch

The face of the watch is a solar cell that generates power from light. The generated power charges a

built-in rechargeable battery, which powers watch operations. The watch charges whenever it is exposed

to light.

Charging Guide

Whenever you are not wearing the

watch, leave it in a location where it

is exposed to light.

• Best charging performance is

achieved by exposing the watch to

the strongest light available.

When wearing the watch, make sure

that its face is not blocked from light

by the sleeve of your clothing.

• The watch may enter a sleep state

if its face is blocked by your sleeve

even only partially.

Warning!

Leaving the watch in bright light for charging can cause it to become quite hot.

Take care when handling the watch to avoid burn injury. The watch can become particularly hot

when exposed to the following conditions for long periods.

• On the dashboard of a car parked in direct sunlight

• Too close to an incandescent lamp

• Under direct sunlight

Important!

• Allowing the watch to become very hot can cause its liquid crystal display to black out. The

appearance of the LCD should become normal again when the watch returns to a lower temperature.

• Turn on the watch’s Power Saving function and keep it in an area normally exposed to bright light when

storing it for long periods. This helps to ensure that power does not run down.

• Storing the watch for long periods in an area where there is no light or wearing it in such a way that it is

blocked from exposure to light can cause power to run down. Expose the watch to bright light

whenever possible.

(Light)(Light) (Light)

Module 3173

(Light)

Module 3246

(Light)(Light) (Light)

Module 3173

(Light)

Module 3246

Power Levels

You can get an idea of the watch’s power level by observing the battery power indicator on the display.

Level Battery Power Indicator Function Status

(H) All functions enabled.

(M) All functions enabled.

(L)

Illumination, beeper, and sensor operation

disabled.

(C)

Except for timekeeping and the

C (charge)

indicator, all functions and display

indicators disabled.

5 All functions disabled.

• The ﬂ ashing LOW indicator at Level 3 (

L) tells you that battery power is very low, and that exposure to

bright light for charging is required as soon as possible.

• At Level 5, all functions are disabled and settings return to their initial factory defaults. Once the battery

reaches Level 2 (M) after falling to Level 5, reconﬁ gure the current time, date, and other settings.

• Display indicators reappear as soon as the battery is charged from Level 5 to Level 2 (M).

• Leaving the watch exposed to direct sunlight or some other very strong light source can cause the

battery power indicator to show a reading temporarily that is higher than the actual battery level. The

correct battery level should be indicated after a few minutes.

• All data stored in memory is deleted, and the current time and all other settings return to their initial

factory defaults whenever battery power drops to Level 5 and when you have the battery replaced.

Power Recovery Mode

• Performing multiple sensor, illumination, or beeper operations during a short period may cause all of

the battery power indicators (H,M, and L) to start ﬂ ashing on the display. This indicates that the watch

is in the power recovery mode. Illumination, alarm, countdown timer alarm, hourly time signal, and

sensor operations will be disabled until battery power recovers.

• Battery power will recover in about 15 minutes. At this time, the battery power indicators (

H,M,L) will

stop ﬂ ashing. This indicates that the functions listed above are enabled again.

• If all of the battery power indicators (H,M,L) are ﬂ ashing and the

C (charge) indicator also is ﬂ ashing,

it means the battery level is very low. Expose the watch to bright light as soon as possible.

• Even if battery power is at Level 1 (

H) or Level 2 (M), the Digital Compass Mode, Barometer/

Thermometer Mode, or Altimeter Mode sensor may be disabled if there is not enough voltage available

to power it sufﬁ ciently. This is indicated when all of the battery power indicators (

H,M,L) are ﬂ ashing.

• Frequent ﬂ ashing of all of the battery power indicators (H

,M,L) probably means that remaining battery

power is low. Leave the watch in bright light to allow it to charge.

Charging Times

Exposure Level (Brightness)

Daily

Operation

Level Change *2

Level 5 Level 4 Level 3 Level 2 Level 1

Outdoor sunlight (50,000 lux) 5 min. 2 hours 12 hours 4 hours

Sunlight through a window (10,000 lux)

24 min. 5 hours 59 hours 16 hours

Daylight through a window on a

cloudy day (5,000 lux) 48 min. 9 hours 120 hours 32 hours

Indoor ﬂ uorescent lighting (500 lux) 8 hours 95 hours – – – – – –

*1 Approximate amount of exposure time required each day to generate enough power for normal daily

operation.

*2 Approximate amount of exposure time (in hours) required to take power from one level to the next.

• The above exposure times all are for reference only. Actual exposure times depend on lighting

conditions.

• For details about the operating time and daily operating conditions, see the “Power Supply” section of

the Speciﬁ cations.

Power Saving

When turned on, Power Saving enters a sleep state automatically whenever the watch is left for a certain

period in an area where it is dark. The table below shows how watch functions are affected by Power

Saving.

• There actually are two sleep state levels: “display sleep” and “function sleep”.

Elapsed Time in Dark Display Operation

60 to 70 minutes (display sleep) Blank, with

PS ﬂ ashing Display is off, but all functions are enabled.

6 or 7 days (function sleep) Blank, with

PS not ﬂ ashing All functions are disabled, but timekeeping is

maintained.

• The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch is already in a sleep

state when 6:00 AM arrives, however, it will remain in the sleep state.

• The watch will not enter a sleep state while it is in the Stopwatch Mode or Countdown Timer Mode.

To recover from the sleep state

Move the watch to a well-lit area, press any button, or angle the watch towards your face for reading.

To turn Power Saving on and off

1. In the Timekeeping Mode, hold down E until the currently selected

city code starts to ﬂ ash. This is the city code setting screen.

• Before the city code starts to ﬂ ash, the message SET Hold

will appear on the display. Keep E depre ssed un til SET Hold

disappears and the cit y code starts to ﬂ ash.

2. Use D to display the Power Saving On/Off screen shown nearby.

3. Press

A to toggle Power Saving on (

) and off ( OFF).

4. Press

E twice to exit the setting screen.

• The Power Savi ng on indicator (PS) is on the display in all modes

while Power Sav ing is tur ned on.

Battery power

indicator

Battery power

indicator

Power saving

on indicator

Power saving

on indicator

MO1007-EB

Operation Guide 3173 3246

Mode Reference Guide

Your watch has 10 “modes”. The mode you should select depends on what you want to do.

To do this: Enter this mode:

• View the current date in the Home City

• Conﬁ gure Home City and daylight saving time (DST) settings

• Conﬁ gure time and date settings

Timekeeping Mode

View the sunrise and sunset times for a speciﬁ c date Sunrise/Sunset Mode

• Determine your current bearing or the direction from your current location to a

destination as a direction indicator and angle value

• Determine your current location using the watch and a map

Digital Compass Mode

• View the barometric pressure and temperature at your current location

• View a graph of barometric pressure readings

Barometer/Thermometer

Mode

To do this: Enter this mode:

• View the altitude at your current location

• Determine the altitude differential between two locations (reference point and

current location)

• Record an altitude reading with the measurement time and date

Altimeter Mode

Recall records created in the Altimeter Mode Data Recall Mode

View the current time in one of 48 cities (31 time zones) around the globe World Time Mode

Use the stopwatch to measure elapsed time Stopwatch Mode

Use the countdown timer Countdown Timer Mode

Set an alarm time Alarm Mode

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Auto Return Features

• The watch returns to the Timekeeping Mode automatically if you do not perform any button operation

for two or three minutes in the Sunrise/Sunset, Data Recall, Alarm, or Digital Compass Mode.

• If you leave a screen with ﬂ ashing digits on the display for two or three minutes without performing any

operation, the watch exits the setting screen automatically.

Initial Screens

When you enter the World Time, Alarm, or Digital Compass Mode, the data you were viewing when you

last exited the mode appears ﬁ rst.

Scrolling

The A and C buttons are used on the setting screen to scroll through data on the display. In most

cases, holding down these buttons during a scroll operation scrolls through the data at high speed.

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

• Pressing E while in the Timekeeping Mode will cycle through the Timekeeping Mode display formats

as shown below.

Year Barometric

pressure graph

Day of the Week Screen Year Screen Barometric Pressure

Graph Screen

indicator

Day of

week

Month

Day

SecondsHour : Minutes

Conﬁ guring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting either standard time or

daylight saving time (DST).

To conﬁ gure Home City settings

1. In the Timekeeping Mode, hold down E until the currently selected

city code starts to ﬂ ash. This is the city code setting screen.

• Before the city code starts to ﬂ ash, the message SET Hold

will appear on the display. Keep E depressed until SET Hold

disappears and the city code starts to ﬂ ash.

• The watch will exit the setting mode automatically if you do not

perform any operation for about two or three minutes.

• For details about city codes, see the “City Code Table”.

2. Press A (East) and C (West) to select the city code you want to use

as your Home City.

• Keep pressing A or

C until the city code you want to select as

your Home City appears on the display.

3. Press D to display the DST setting screen.

Use A to toggle the DST settings between OFF and On.

• Note that you cannot switch between standard time and daylight

saving time (DST) while UTC is selected as your Home City.

5. After all the settings are the way you want, press

E twice to return to the Timekeeping Mode.

• The indicator appears to indicate that Daylight Saving Time is turned on.DST

Note

• After you specify a city code, the watch will use UTC* offsets in the World T ime Mode to calculate

the current time for other time zones based on the current time in your Home City.

* Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping.

The reference point for UTC is Greenwich, England.

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down E until the currently selected

city code starts to ﬂ ash. This is the city code setting screen.

• Before the city code starts to ﬂ ash, the message SET Hold

will appear on the display. Keep E depressed until SET Hold

disappears and the city code starts to ﬂ ash.

2. Press D to display the DST setting screen.

3. Use A to toggle the DST settings between OFF and On.

4. After all the settings are the way you want, press

E twice to return to

the Timekeeping Mode.

• The DST indicator appears to indicate that Daylight Saving T ime is

turned on.

indicator

City

code

Month

Day

SecondsHour : Minutes

DST indicator

indicator

City

code

Month

Day

SecondsHour : Minutes

DST indicator

DST indicatorDST indicator

Selecting a Mode

• The illustration below shows which buttons you need to press to navigate between modes.

• For about one second after you enter a mode by pressing D, a pointer will appear on the display

pointing the applicable mode name on the watch's bezel.

• In any mode, press L to illuminate the display.

• You can use buttons A,B, and C to enter a sensor mode directly from the Timekeeping Mode or

from another sensor mode. To enter a sensor mode from the Sunrise/Sunset Mode, Data Recall, World

Time, Stopwatch, Countdown Timer, or Alarm Mode, ﬁ rst enter the Timekeeping Mode and then press

the applicable button.

World Time

Mode

Data Recall

Mode

Sunrise/Sunset

Mode

Stopwatch Mode

Countdown

Timer Mode Alarm Mode

Altimeter Mode

Barometer/

Thermometer ModeDigital Compass Mode

Timekeeping Mode

Sensor Modes

World Time

Mode

Data Recall

Mode

Sunrise/Sunset

Mode

Stopwatch Mode

Countdown

Timer Mode Alarm Mode

Altimeter Mode

Barometer/

Thermometer ModeDigital Compass Mode

Timekeeping Mode

Sensor Modes

Operation Guide 3173 3246

Conﬁ guring Current Time and Date Settings

You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.

To change the current time and date settings

1. In the Timekeeping Mode, hold down E until the currently selected

city code starts to ﬂ ash. This is the city code setting screen.

• Before the city code starts to ﬂ ash, the message SET Hold

will appear on the display. Keep E depressed until SET Hold

disappears and the city code starts to ﬂ ash.

2. Use A and C to select the city code you want.

• Select your Home City code before changing any other setting.

• For full information on city codes, see the “City Code Table”.

3. Press D to move the ﬂ ashing in the sequence shown below to select the other settings.

Thermometer/Barometer/

Altitude unit

Power

Saving

Illumination

Duration

Button Operation

Tone On/Off Day Month

City Code DST 12/24-Hour

Format Seconds Hour Minutes Year

• The following steps explain how to conﬁ gure timekeeping settings only.

4. When the timekeeping setting you want to change is ﬂ ashing, use A and/or C to change it as

described below.

Screen To do this: Do this:

Change the city code Use

A (East) and C (West).

Toggle between Daylight Saving Time (

) and

Standard Time (

OFF). Press A.

Toggle between 12-hour (

12H) and 24-hour (24H)

timekeeping. Press A.

50 Reset the seconds to

00 Press A.

Change the hour or minutes

Use A (+) and C (–).

Change the year, month, or day

5. Press E twice to exit the setting screen.

Note

• For information about selecting a Home City and conﬁ guring the DST setting, see “Conﬁ guring

Home City Settings”.

• While 12-hour format is selected for timekeeping, a P (PM) indicator will appear for times from

noon to 11:59 p.m. No indicator appears for times from midnight to 11:59 a.m. With 24-hour format,

time is displayed from 0:00 to 23:59, without any P (PM) indicator.

• The watch’s built-in full automatic calendar makes allowances for different month lengths and leap

years. Once you set the date, there should be no reason to change it except after you have the

watch’s rechargeable battery replaced or after power drops to Level 5.

Digital Compass

In the Digital Compass Mode, a built-in bearing sensor detects magnetic north at regular intervals and

indicates one of 16 directions on the display.

To take a digital compass reading

1. Make sure the watch is in the Timekeeping Mode or any one of the

sensor modes.

• The sensor modes are: Digital Compass Mode, Barometer/

Thermometer Mode, and Altimeter Mode.

2. Place the watch on a ﬂ at surface. If you are wearing the watch, make

sure that your wrist is horizontal (in relation to the horizon).

3. Point the 12 o'clock position of the watch in the direction you want to

measure.

4. Press C to start digital compass measurement.

• COMP will appear on the display to indicate that a digital compass

operation is in progress.

• See “Digital Compass Readings” for information about what

appears on the display.

Note

• If a value appears to the right of the direction indicator, it means

that the bearing memory screen is displayed. If this happens, press

E to exit the bearing memory screen.

5. After you are ﬁ nished using the digital compass, press D to return to

the Timekeeping Mode.

Digital Compass Readings

• When you press C to start digital compass measurement, COMP will appear on the display initially to

indicate that a digital compass operation is in progress.

• About two seconds after you start a digital compass measurement operation, letters on the display will

indicate the direction that the 12 o’clock position of the watch is pointing. Four pointers that indicate

magnetic north, south, east, and west also will appear.

• After the ﬁ rst reading is obtained, the watch will continue to take digital compass readings automatically

each second for up to 20 seconds. After that, measurement will stop automatically.

• The direction indicator and angle value will show

- - - to indicate that digital compass readings are

complete.

• The auto light switch is disabled during the 20 seconds that digital compass readings are being taken.

• The following table shows the meanings of each of the direction abbreviations that appear on the

display.

Direction Meaning Direction Meaning Direction Meaning Direction Meaning

NNorth NNE North-

northeast NE Northeast ENE East-

northeast

EEast ESE East-

southeast SE Southeast SSE South-

southeast

SSouth SSW South-

southwest SW Southwest WSW West-

southwest

WWest WNW West-

northwest NW Northwest NNW North-

northwest

• The margin of error for the angle value and the direction indicator is ±11 degrees while the watch is

horizontal (in relation to the horizon). If the indicated direction is northwest (

NW) and 315 degrees, for

example, the actual direction can be anywhere from 304 to 326 degrees.

indicator

City

code

Month

Day

SecondsHour : Minutes

indicator

City

code

Month

Day

SecondsHour : Minutes

NW 0

WNW

WSW

SSW

ESE

ENE

NNE

NNW

90180

270

12 o’clock

position

Current

time

North

pointer

Direction

indicator

Angle value (in degrees)

NW 0

WNW

WSW

SSW

ESE

ENE

NNE

NNW

90180

270

12 o’clock

position

Current

time

North

pointer

Direction

indicator

Angle value (in degrees)

• Note that taking a measurement while the watch is not horizontal (in relation to the horizon) can result in

large measurement error.

• You can calibrate the bearing sensor if you suspect the direction reading is incorrect.

• Any ongoing direction measurement operation is paused temporarily while the watch is performing an

alert operation (daily alarm, Hourly Time Signal, countdown timer alarm) or while illumination is turned

on (by pressing L). The measurement operation resumes for its remaining duration after the operation

that caused it to pause is ﬁ nished.

• See “Digital Compass Precautions” for important information about taking direction readings.

Calibrating the Bearing Sensor

You should calibrate the bearing sensor whenever you feel that the direction readings being produced by

the watch are off. There are three different calibration methods available: magnetic declination correction,

bidirectional calibration, and northerly calibration.

• Magnetic Declination Correction

With magnetic declination correction, you input a magnetic declination angle (difference between

magnetic north and true north), which allows the watch to indicate true north. You can perform this

procedure when the magnetic declination angle is indicated on the map you are using. Note that you can

input the declination angle in whole degree units only, so you may need to round off the value speciﬁ ed

on the map. If your map indicates the declination angle as 7.4°, you should input 7°. In the case of 7.6°

input 8°, for 7.5° you can input 7° or 8°.

• Bidirectional Calibration and Northerly Calibration

Bidirectional calibration and northerly calibration calibrate the accuracy of the bearing sensor in relation

to magnetic north. Use bidirectional calibration when you want to take readings within an area exposed

to magnetic force. This type of calibration should be used if the watch becomes magnetized for any

reason. With northerly calibration, you “teach” the watch which way is north (which you have to determine

with another compass or some other means).

Important!

The more correctly you perform bidirectional calibration, the better the accuracy of the bearing sensor

readouts. You should perform bidirectional calibration whenever you change environments where you

use the bearing sensor, and whenever you feel that the bearing sensor is producing incorrect readings.

To perform magnetic declination correction

In the Digital Compass Mode, hold down E until the current magnetic

declination settings start to ﬂ ash on the display. This is the setting screen.

•

Before the magnetic declination settings start to ﬂ ash, the message

SET Hold will appear on the display. Keep

E depressed until

SET Hold disappears and the magnetic declination settings start to

ﬂ a s h .

2. Use A (East) and C (West) to change the settings.

• The following explains magnetic declination angle direction

settings.

OFF: No magnetic declination correction performed. The magnetic

declination angle with this setting is 0°.

E: When magnetic north is to the east (east declination)

W: When magnetic north is to the west (west declination)

• You can select a value within the range of W 90° to E 90° with

these settings.

• You can turn off (OFF) magnetic declination correction by pressing

A and C at the same time.

• The illustration, for example, shows the value you should input

and the direction setting you should select when the map shows a

magnetic declination of 1° West.

3. When the setting is the way you want, press E to exit the setting

screen.

Precautions about bidirectional calibration

• You can use any two opposing directions for bidirectional calibration. You must, however, make sure

that they are 180 degrees opposite each other. Remember that if you perform the procedure

incorrectly, you will get wrong bearing sensor readings.

• Do not move the watch while calibration of either direction is in progress.

• You should perform bidirectional calibration in an environment that is the same as that where you plan

to be taking direction readings. If you plan to take direction readings in an open ﬁ eld, for example,

calibrate in an open ﬁ eld.

To perform bidirectional calibration

1. In the Digital Compass Mode, hold down E until the current magnetic

declination settings start to ﬂ ash on the display. This is the setting

screen.

• Before the magnetic declination settings start to ﬂ ash, the

message SET Hold will appear on the display. Keep E depressed

until SET Hold disappears and the magnetic declination settings

start to ﬂ ash.

2. Press D to display the bidirectional calibration screen.

• At this time, the north pointer ﬂ ashes at the 12 o’clock position

and the display will show -1- to indicate that the watch is ready to

calibrate the ﬁ rst direction.

3. Place the watch on a level surface facing any direction you want, and

press C to calibrate the ﬁ rst direction.

• - - - is shown on the display while calibration is being performed.

When calibration is successful, the display will show and ,OK -2-

and the north pointer ﬂ ashing at the 6 o’clock position. This means

that the watch is ready for calibration of the second direction.

4. Rotate the watch 180 degrees.

5. Press C again to calibrate the second direction.

• - - - is shown on the display while calibration is being performed. When calibration is successful,

the display will show OK and then change to the Digital Compass Mode screen (- - -).

To perform northerly calibration

Important!

If you want to perform both northerly and bidirectional calibration, perform bidirectional calibration ﬁ rst,

and then perform northerly calibration. This is necessary because bidirectional calibration cancels any

existing northerly calibration setting.

1. In the Digital Compass Mode, hold down E until the current magnetic

declination settings start to ﬂ ash on the display. This is the setting

screen.

• Before the magnetic declination settings start to ﬂ ash, the

message SET Hold will appear on the display. Keep E depressed

until SET Hold disappears and the magnetic declination settings

start to ﬂ ash.

2. Press D twice to display the northerly calibration screen.

• At this time, -N- (north) appears on the display.

3. Place the watch on a level surface, and position it so that its 12 o’clock

position points north (as measured with another compass).

4. Press C to start the calibration operation.

• - - - is shown on the display while calibration is being performed.

When calibration is successful, the display will show and then OK

change to the Digital Compass Mode (- - -).

Magnetic declination

angle direction value

(E, W, or OFF)

Magnetic declination

angle value

Magnetic declination

angle direction value

(E, W, or OFF)

Magnetic declination

angle value

Produktspecifikationer

Varumärke:	Casio
Kategori:	Titta
Modell:	Pro Trek

Behöver du hjälp?

Om du behöver hjälp med Casio Pro Trek ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Titta Casio Manualer

Casio Edifice EQB-1000TR-2AER Bruksanvisning

24 Oktober 2024

Casio Collection MTP-1259PD-7BEF Bruksanvisning

24 Oktober 2024

Casio G-Shock GA-810B-1A9ER Bruksanvisning

24 Oktober 2024

Casio Collection SGW-450HD-1BER Bruksanvisning

24 Oktober 2024

Casio Edifice EQB-1000XD-1AER Bruksanvisning

24 Oktober 2024

Casio Collection MTP-1222A-2AVEF Bruksanvisning

24 Oktober 2024

Casio G-Shock GMW-B5000G-2ER Bruksanvisning

24 Oktober 2024

Casio Radio Controlled WV-200E-1AVEF Bruksanvisning

24 Oktober 2024

Casio Collection LWS-2000H-2AVEF Bruksanvisning

24 Oktober 2024

Casio Pro Trek PRW-60YBM-1AER Bruksanvisning

24 Oktober 2024

Titta Manualer

Nyaste Titta Manualer

Lorus W207 Bruksanvisning

27 Oktober 2024

Invicta Specialty 31308 Bruksanvisning

27 Oktober 2024

Timex Ironman TW5M244009J Bruksanvisning

26 Oktober 2024

Timex MK1 TW2R68800VQ Bruksanvisning

26 Oktober 2024

Braun BN0021 Bruksanvisning

24 Oktober 2024

Braun AW60 Bruksanvisning

24 Oktober 2024

Braun BN0042 Bruksanvisning

24 Oktober 2024

Skmei 0984A Bruksanvisning

22 Oktober 2024

Suunto SPARTAN ULTRA 1.2 Bruksanvisning

21 Oktober 2024

Skmei 0955 Bruksanvisning

21 Oktober 2024