Cateye Orbit 2 SL-LD150 Bruksanvisning

Cateye Lättnad Orbit 2 SL-LD150

Läs nedan 📖 manual på svenska för Cateye Orbit 2 SL-LD150 (1 sidor) i kategorin Lättnad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
ENG
Design Pat. Pending
Copyright© 2015 CATEYE Co., Ltd.
SLLD150-151216 2
COIN
1
2
3
1
2
CR2032 x 2
3
Click
Constant
(Approx. )30 h
Flash
(Approx. )50 h
OFF
x 2
NO!OK
O R B I T 2
MODEL
:
SL-LD150
Before using the product, please thoroughly read
this manual and keep it for future reference.
CAUTION!:
If a child swallows a battery, consult a doctor immediately.
Keep the light away from children.
Do not misplace the plus or minus sides of the batteries.
Please do not mix new and old batteries.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to local regulations.
This product is water-resistant under normal daily use and
can be used in the rain. However, do not intentionally
submerge it in water.
LIMITED WARRANTY
2-year Warranty: Light unit only
CatEye products are warranted to be free of defects from materials and workmanship for a
period of 2 years from original purchase. If the product fails to work during normal use,
CatEye will repair or replace the defect at no charge. Service must be performed by CatEye or
an authorized retailer. To return the product, pack it carefully and enclose the warranty
certificate (proof of purchase) with instruction for repair. Please write or type your name and
address clearly on the warranty certificate. Insurance, handling and transportation charges to
CatEye shall be borne by person desiring service.
For UK and REPUBLIC OF IRELAND consumers, please return to the place of purchase. This
does not affect your statutory rights.
SPARE/OPTIONAL PARTS
5442160
Lock nut
1665150
Lithium battery
(CR2032)
SPECIFICATIONS
Battery : Lithium battery (CR2032) x 2
Temperature range : 14 °F – 104 °F (-10 °C – 40 °C)
Dimensions/weight : 5-15/64” x 1-59/64” x 45/64” (133 x 49 x 18 mm) / 1.34 oz
(38 g) (Including batteries)
* Life of factory-installed battery may be shorter than indicated above.
* The specifications and design are subject to change without notice.
2. HOW TO MOUNT
1. BEFORE INITIAL USE
HOW TO INSTALL BATTERY
3. SWITCH OPERATION
REMOVING THE REFLECTOR
Lock nut
Cap
Insulation sheet
Place the nut into the reflector hole putting the spoke in between
then tighten it securely using a coin.
Fix the reflector on a spoke so that the reflector is roughly
parallel with the rim.
Fix the reflector in place in a position that is as close to the
tire as possible.
Mount the reflector onto a spoke securely so that the
reflector does not move up and down.
* Please visit CATEYE website for applicable spoke type and size.
To remove the reflector, insert a
flathead screwdriver into the lock
nut, and then turn the lock nut in
the counterclockwise direction.
CAUTION!:
Be sure to use a new lock nut
(sold separately) when you mount
the reflector onto a spoke again.
CAUTION!:
If the cap is not
completely closed,
the water may
enter the product.
2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan
Attn: CATEYE Customer Service Section
Phone : (06)6719-6863 Fax : (06)6719-6033
E-mail : support@cateye.co.jp URL : http://www.cateye.com
[For US Customers]
CATEYE AMERICA, INC.
2825 Wilderness Place Suite 1200, Boulder CO 80301-5494 USA
Phone : 303.443.4595 TollFree : 800.5.CATEYE
Fax : 303.473.0006 E-mail : service@cateye.com
CO.,LTD.
Flathead screwdriver

Produktspecifikationer

Varumärke: Cateye
Kategori: Lättnad
Modell: Orbit 2 SL-LD150

Behöver du hjälp?

Om du behöver hjälp med Cateye Orbit 2 SL-LD150 ställ en fråga nedan och andra användare kommer att svara dig




Lättnad Cateye Manualer

Lättnad Manualer

Nyaste Lättnad Manualer