Chef's Choice Professional Diamond Hone 2000 Bruksanvisning
Chef's Choice
Knivslipare
Professional Diamond Hone 2000
Läs nedan 📖 manual på svenska för Chef's Choice Professional Diamond Hone 2000 (36 sidor) i kategorin Knivslipare. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/36
instruction manual
Professional
Diamond Hone® Knife Sharpener 2000
RUGB UA
Read instructions before use.
It is essential that you follow these
instructions to achieve optimal results.
2
imPortant saFEGuarDs
When using electrical appliances, basic safety precautions should always be
followed including the following:
1. Read all instructions. Every user should read this manual.
2. To protect against electrical hazards, do not immerse the Chef’sChoice
® motor drive
section in water or other liquid.
3. Make sure only clean knife blades are inserted in the Chef’sChoice
® Model 2000.
4. Unplug from outlet when not in use, before putting on or taking off parts and
before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner.
U.S. customers: You can return your sharpener to EdgeCraft’s factory for service where
the cost of repair or electrical or mechanical adjustment can be estimated. When the
electrical cord on this appliance is damaged, it must be replaced by the Chef’sChoice
®
distributor or other qualified service to avoid the danger of electrical shock.
Outside U.S.: Please return your sharpener to your local distributor where the cost of
repair or electrical or mechanical adjustment can be estimated. If the supply cord of
this appliance is damaged, it must be replaced by a repair facility appointed by
the manufacturer because special tools are required. Please consult your local
Chef’sChoice® distributor.
7. CAUTION! “This appliance may be fitted with a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not modify the plug in anyway.”
8. The use of attachments not recommended or sold by EdgeCraft Corporation may cause
fire, electric shock or injury.
9. The Chef’sChoice® Model 2000 is designed to sharpen kitchen knives (including ser-
rated knives), pocket knives and most sports knives. Do not attempt to sharpen “parrot
beak” knives, scissors, ax blades or any blade that does not fit freely in the slots.
10. Do not let the cord hang over edge of table or counter or touch hot surfaces.
11. When in the “ON” position (Red flash on switch is exposed when “on”) the
Chef’sChoice® should always be on a stable countertop or table.
12. WARNING: KNIVES PROPERLY SHARPENED ON YOUR CHEF’SCHOICE
® WILL BE SHARPER
THAN YOU EXPECT. TO AVOID INJURY, USE AND HANDLE THEM WITH EXTREME CARE.
DO NOT CUT TOWARD ANY PART OF YOUR FINGERS, HAND OR BODY. DO NOT RUN
FINGER ALONG EDGE. STORE IN A SAFE MANNER.
13. Do not use outdoors.
14. Close supervision is necessary when any appliance is used by or near children.
15. Do not use honing oils, water or any other lubricant with the Chef’sChoice
®.
16. SAVE THESE INSTRUCTIONS.
Congratulations on your selection of
the Chef’sChoice® Professional Knife
Sharpener Model 2000!
You will find this method of sharpening puts an exceptionally sharp and durable edge on all
of your knives. It is backed by EdgeCraft—World Leader in Cutting Edge Technology
®.
The Chef‘sChoice® Commercial Diamond Hone® Knife Sharpener Model 2000
incorporates advanced diamond abrasive and honing technology to produce the sharp-
est and most durable edges of any sharpener available today. With it you can develop a
shaving-sharp edge on all your knives. Once your knives have been sharpened on the
Model 2000, resharpening takes less than 1 minute.
Consequently, if the Model 2000 is conveniently located in your work area, you can
resharpen so rapidly that you need not rely on the sharpening steel to tune up the edge.
UNPACKING AND PREPARING FOR OPERATION
The Model 2000 has a motor-drive section and a detachable Sharpening Module that is
packed and shipped disassembled (See Figure 1).
To assemble the Model 2000, insert the Sharpening Module into the guide rails of the
motor section, (Figure 2) and slide the module toward the motor housing until it locks in
place. If the sections do not snap together easily & quickly, follow the instructions in the
“Inserting” section, (Page 8) of this manual.
3
Figure 1. Model 2000
sharpener - disassembled.
On/Off Switch
Sharpening Module
Motor-drive Section
Release Button
Produktspecifikationer
| Varumärke: | Chef's Choice |
| Kategori: | Knivslipare |
| Modell: | Professional Diamond Hone 2000 |
Behöver du hjälp?
Om du behöver hjälp med Chef's Choice Professional Diamond Hone 2000 ställ en fråga nedan och andra användare kommer att svara dig
Knivslipare Chef's Choice Manualer
18 September 2024
18 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
Knivslipare Manualer
- Knivslipare IKEA
- Knivslipare Adler
- Knivslipare Ambiano
- Knivslipare Ozito
- Knivslipare Gude
- Knivslipare Silvercrest
- Knivslipare Waring Commercial
- Knivslipare OBH Nordica
- Knivslipare Melissa
- Knivslipare Sun Joe
- Knivslipare Beper
- Knivslipare Tacklife
- Knivslipare Eldom
- Knivslipare Einhell
- Knivslipare Guzzanti
- Knivslipare Blokker
- Knivslipare Trebs
- Knivslipare Steba
- Knivslipare Champion
- Knivslipare Bomann
- Knivslipare Graef
- Knivslipare Presto
- Knivslipare Salter
- Knivslipare Bifinett
- Knivslipare Tower
- Knivslipare Gastroback
- Knivslipare Sogo
- Knivslipare Bavaria
- Knivslipare For_Q
- Knivslipare Roadstar
- Knivslipare C3
- Knivslipare Herkules
- Knivslipare Gardenline
- Knivslipare Orava
- Knivslipare Wüsthof
- Knivslipare Work Sharp
- Knivslipare EdgeCraft
- Knivslipare Berkel
- Knivslipare Petra Electric
- Knivslipare GARDE
- Knivslipare Alpha Tools
- Knivslipare Studio
- Knivslipare IdeenWelt
- Knivslipare Brentwood
- Knivslipare Donau Elektronik
- Knivslipare Sharpal
Nyaste Knivslipare Manualer
7 Januari 2025
7 Januari 2025
7 Januari 2025
30 December 2025
30 December 2025
29 December 2024
9 December 2024
8 December 2024
6 December 2024
11 Oktober 2024