Chief DGC65S Bruksanvisning
Chief
Platt panelstöd
DGC65S
Läs nedan 📖 manual på svenska för Chief DGC65S (17 sidor) i kategorin Platt panelstöd. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/17
Chief Manufacturing, a division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918
8831-000011 Rev C
©2008 Milestone AV Technologies
www.chiefmfg.com
06/08
I N S T A L L A T I O N I N S T R U C T I O N S
DGC Series Display Guard™ Enclosures
DGC32, DGC42, DGC-50 and DGC-65
The Display Guard series of enclosures are designed to protect flat panel displays in high-risk
environments. The series is available in three sizes:
DGC-32: designed for 32-inch display models
DGC-42: designed for 42-inch display models
DGC-50: designed for 50-inch display models
DGC-65: designed for 65-inch display models
The enclosures are supplied as a fixed wall display enclosure. Accessories, such as the ceiling mount and
post assembly, are sold separately.
These enclosures provide excellent security and protection while providing easy viewing and access for
adjustments and display maintenance. The enclosures are also equipped with a security locks to protect the
display from inadvertent scratches and guard against theft.
Display Guard – Closed Display Guard – Opened
BEFORE YOU BEGIN
CAUTION: To prevent damage to your display and Display Guard, which could affect or void the
Factory warranty, thoroughly study all instructions and illustrations before you begin to install
the mount. Pay particular attention to the Warnings and Cautions in this document.
CAUTION! The maximum weight capacity of the Display Guard fixed wall mounts is located in Table 2.
Chief® is a registered trademark of Milestone AV Technologies, Inc. All rights reserved.
Installation Instructions DGI-42 and DGI-50
2
IMPORTANT WARNINGS and CAUTIONS!
WARNING A WARNING alerts you to the possibility of serious injury or death if you do not
follow the instructions.
CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you
do not follow the corresponding instructions.
WARNING Improper installation can result in serious personal injury! Make sure that the
structural members can support a redundant weight factor five times the total
weight of the equipment. If not, reinforce the structure before installing the
mount.
WARNING If the Display Guard is not installed correctly, there is the potential for personal
injury or damage to the unit.
WARNING The installer is responsible for verifying that the wall to which the Display
Guard will be anchored will safely support the combined load of all attached
components or other equipment.
WARNING Weight Specifications (see Table 2).
WARNING Watch out for pinch points. Do not put your fingers between movable parts.
WARNING Make sure the mount is correctly oriented.
CAUTION Check the unit for shipping damage before you begin the installation.
CAUTION Use only the bolts that are provided and do not over-tighten the bolts.
EXTERIOR DIMENSIONS
Table 1 and Figure 1 provide the exterior dimensions of the Display Guard.
Table 1. Exterior Dimensions
Description Enclosure Model
Exterior
dimensions 32” 42” 50” 65”
Height 27.63 31.94 36.94 44.38
Width 38.74 47.94 55.94 69.64
Depth 19.55 23.01 23.05 21.21
Specifications are subject to change without notice
Figure 1. Exterior Dimensions of Display Guard
Depth
Height
Width
Installation Instructions DGI-42 and DGI-50
3
WEIGHT SPECIFICATIONS
Table 2 provides the weight specifications for Display
Guard models.
Do not exceed the maximum support weight, defined as
the combined load of all attached components that can be
installed in the Display Guard.
Table 2. Weight Specifications
Model Enclosure Weight
Fixed Wall Mount
Max. Support Weight
DGC-32 125 lbs (56.70 kg) 400 lbs (181.4 kg)*
DGCA-32 145 lbs (65.78 kg) 400 lbs (181.4 kg)*
DGC-42 125 lbs (56.70 kg) 400 lbs (181.4 kg)*
DGCA-42 175 lbs (79.38 kg) 400 lbs (181.4 kg)*
DGC-50 155 lbs (70.31 kg) 400 lbs (181.4 kg)*
DGCA-50 195 lbs (88.45 kg) 400 lbs (181.4 kg)*
DGC-65 235 lbs (106.6 kg) 600 lbs (272.2 kg)*
DGCA-65 295 lbs (133.8 kg) 600 lbs (272.2 kg)*
* Fixed wall mount maximum support weight capacity
includes combined weight of display being installed and
enclosure.
TOOLS REQUIRED FOR
INSTALLATION
Allen wrench set
Socket wrench set
NOTE: Other tools may be required depending on your
method of installation.
PARTS LIST
Unpack the shipping carton and check for the contents
listed in Table 3 and shown in Figure 2 on Page 4.
Table 3. Parts List
32” 42” 50” 65”
REF DESCRIPTION QTY QTY QTY QTY
10 GAS SPRINGS 1 1 1 1
20 DISPLAY COVER 1 1 1 1
30 HOUSING with wall brackets 1 1 1 1
40 DISPLAY INTERFACE 1 1 1 1
Produktspecifikationer
Varumärke: | Chief |
Kategori: | Platt panelstöd |
Modell: | DGC65S |
Behöver du hjälp?
Om du behöver hjälp med Chief DGC65S ställ en fråga nedan och andra användare kommer att svara dig
Platt panelstöd Chief Manualer
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
Platt panelstöd Manualer
- Platt panelstöd Samsung
- Platt panelstöd HP
- Platt panelstöd Pioneer
- Platt panelstöd Abus
- Platt panelstöd Acco
- Platt panelstöd Akai
- Platt panelstöd Icy Box
- Platt panelstöd Hitachi
- Platt panelstöd Gembird
- Platt panelstöd SilverStone
- Platt panelstöd LC-Power
- Platt panelstöd GPX
- Platt panelstöd Blaupunkt
- Platt panelstöd Manhattan
- Platt panelstöd Tripp Lite
- Platt panelstöd Vision
- Platt panelstöd Kensington
- Platt panelstöd Nabo
- Platt panelstöd Nec
- Platt panelstöd Techly
- Platt panelstöd BlueBuilt
- Platt panelstöd Da-Lite
- Platt panelstöd Luxor
- Platt panelstöd Steren
- Platt panelstöd Iiyama
- Platt panelstöd Barkan
- Platt panelstöd Digitus
- Platt panelstöd Insignia
- Platt panelstöd Sanus
- Platt panelstöd Peerless-AV
- Platt panelstöd Vogels
- Platt panelstöd Fellowes
- Platt panelstöd Dell
- Platt panelstöd Planar
- Platt panelstöd Sven
- Platt panelstöd Konig
- Platt panelstöd One For All
- Platt panelstöd Ematic
- Platt panelstöd Newstar
- Platt panelstöd Ewent
- Platt panelstöd HQ
- Platt panelstöd BakkerElkhuizen
- Platt panelstöd Ultimate
- Platt panelstöd Wentronic
- Platt panelstöd Peerless
- Platt panelstöd Proaim
- Platt panelstöd Monoprice
- Platt panelstöd Ergotron
- Platt panelstöd Gabor
- Platt panelstöd Konig & Meyer
- Platt panelstöd Premier
- Platt panelstöd Atdec
- Platt panelstöd StarTech.com
- Platt panelstöd SIIG
- Platt panelstöd Bell'O
- Platt panelstöd B-tech
- Platt panelstöd Speaka
- Platt panelstöd Crimson
- Platt panelstöd Kogan
- Platt panelstöd Panduit
- Platt panelstöd Schwaiger
- Platt panelstöd Premier Mounts
- Platt panelstöd Cabstone
- Platt panelstöd Elite Screens
- Platt panelstöd Kanto
- Platt panelstöd V7
- Platt panelstöd Kondator
- Platt panelstöd Bretford
- Platt panelstöd SmartMetals
- Platt panelstöd Unicol
- Platt panelstöd Anthro
- Platt panelstöd Alogic
- Platt panelstöd Equip
- Platt panelstöd Zaor
- Platt panelstöd Dataflex
- Platt panelstöd Multibrackets
- Platt panelstöd AMX
- Platt panelstöd Rocstor
- Platt panelstöd CTA Digital
- Platt panelstöd Amer
- Platt panelstöd SunBriteTV
- Platt panelstöd Avteq
- Platt panelstöd Walker Edison
- Platt panelstöd My Wall
- Platt panelstöd Mount-It!
- Platt panelstöd LTN Technologies
- Platt panelstöd Heckler
- Platt panelstöd Helder
- Platt panelstöd NeoMounts
Nyaste Platt panelstöd Manualer
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025