Chief HB32B Bruksanvisning

Chief Projektor tillbehör HB32B

Läs nedan 📖 manual på svenska för Chief HB32B (3 sidor) i kategorin Projektor tillbehör. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

8803-000104

12/07

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com

HB-32B

VIDEO PROJECTOR CEILING MOUNT

FOR DIGITAL PROJECTION TITAN SERIES,

The Chief HB32B video projector ceiling mount is designed to provide fast, simple and secure installation of the Barco

CLM10+. Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The

HB32B mount also has positive registration lock so that the projector may be removed without losing projector mount

registration.

WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL

INJURY! All components must be securely fastened to each other and to the ceiling, AND

the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it

cannot, the ceiling be reinforced.MUST

Unpack and check contents:

(1) Deluxe ceiling mount housing assembly. (3) M10 Washers, Flat

(1) Panasonic mounting bracket (3) M10 x 1.5 x 50mm, bolt

(4) 5/16” Flange Nuts (6) .5” x .257” x .625” nylon spacers

INSTALLATION INSTRUCTIONS

1. Turn your projector upside down.

2. Place the three 5/8” tall nylon spacers on the bottom of your projector and stack the second three on top of the

fist ones so they are two spacers tall.

3. Place the Barco custom mounting bracket over on these nylon spacers on the bottom of your projector lining up

with the three threaded inserts in the bottom of the projector with the three holes in the bracket.

4. Slide the (3) M10 washers, one on each (3) M10 x 50mm bolt and install them into the three threaded inserts in

the projector. Securely tighten all three mounting bolts at this time.

4. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling.

If not, the ceiling must be reinforced. Improper installation may result in serious personal injury.

5. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the

screen.

PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with

mechanical installations. A third assistant is recommended.

6. With the help of your assistants, lift the projector and install it to the four studs extending from the mounting

plate. Be sure the Panasonic mounting plate is seated in slots. Tighten securely using the (4) 5/16” flange

nuts.

For projector alignment see attached sheet.

Produktspecifikationer

Varumärke:	Chief
Kategori:	Projektor tillbehör
Modell:	HB32B

Behöver du hjälp?

Om du behöver hjälp med Chief HB32B ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Projektor tillbehör Chief Manualer

Chief RPMC198 Bruksanvisning

1 Januari 2025

Chief RPMA360 Bruksanvisning

1 Januari 2025

Chief RSMA342 Bruksanvisning

1 Januari 2025

Chief RSMA360 Bruksanvisning

1 Januari 2025

Chief RPMC266 Bruksanvisning

1 Januari 2025

Chief RSMC360 Bruksanvisning

1 Januari 2025

Chief RPMA303 Bruksanvisning

1 Januari 2025

Chief RPMC246 Bruksanvisning

1 Januari 2025

Chief RSA000S Bruksanvisning

1 Januari 2025

Chief RSA360 Bruksanvisning

1 Januari 2025

Projektor tillbehör Manualer

Nyaste Projektor tillbehör Manualer

Vogels PPA 904 Bruksanvisning

10 Januari 2025

Roadinger MBT-3 Bruksanvisning

7 Januari 2025

Peerless-AV PE1120-W Bruksanvisning

27 December 2024

Peerless-AV PAP-SANYO-ST1 Bruksanvisning

27 December 2024

Peerless-AV PAP-298 Bruksanvisning

23 December 2024

Peerless-AV PWA-14S Bruksanvisning

23 December 2024

Sony VPLL-Z4111 Bruksanvisning

23 December 2024

NeoMounts BEAMER-C300 Bruksanvisning

20 December 2024

NeoMounts BEAMER-C80 Bruksanvisning

20 December 2024

NeoMounts BEAMER-W050SILVER Bruksanvisning

20 December 2024