Chief PSS2536B Bruksanvisning

Läs nedan 📖 manual på svenska för Chief PSS2536B (2 sidor) i kategorin Platt panelstöd. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
I N S T A L LA T I O N I N S T R U C T I O N S
Chief Manufacturing, a division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918
8804-000254 RevC
©2008 Milestone AV Technologies
0
5
/08
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4
TIMES THE COMBINED WEIGHT OF ALL COMPONENTS
PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE
REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE
MOUNT IS 1
75
POUNDS (
79.38
KG).
PSB-2534 & 2536
DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(2) Plasma Side Bracket (2) Plasma Top/Bottom Bracket
(4) Mounting Button - Tapped (8) 10-24 x .5 Button Head Cap Screw
(4) M8 x 35mm Button Head Cap Screw (4) .51 X .32 X .875 Nylon Spacer
(4) M8 x 50mm Button Head Cap Screw (4).68 X .32 X .625
(1) 1/8 Allen Key (1) M5 Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
DISPLAYS ARE EXTREMELY FRAGILE.
1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with
chamfered hole of mounting button (larger surface) facing bracket, to top and bottom brackets (four places)
(see Figure 2 & Figure 3).
Figure 1
WARNING!
Figure 2 Figure 3
2. Using four 10-24 button head cap screws, attach top and bottom to side brackets (see Figure 4 &
Figure 5). The square offset holes can be used if use of the center hole causes the cross brackets to
block connections or if an offset is needed for the installation (See Figure 6 & Figure 7).
3. Place Nylon spacers over mounting holes on back of screen. Attach mounting brackets to display
using M8 screws (see Figures 8 & Figure 9). If needed add both sets of spacers and use the set of
longer bolts to attain required clearance.
4. With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting
brackets with slots in the Chief Mount.
5. Lower safety latch on the Chief Mount to secure your display, making sure latch is completely
engaged.
Figure 4 Figure 5
Figure 8 Figure 9
Figure 6 Figure 7

Produktspecifikationer

Varumärke: Chief
Kategori: Platt panelstöd
Modell: PSS2536B

Behöver du hjälp?

Om du behöver hjälp med Chief PSS2536B ställ en fråga nedan och andra användare kommer att svara dig




Platt panelstöd Chief Manualer

Platt panelstöd Manualer

Nyaste Platt panelstöd Manualer