Chief RSA315 Bruksanvisning
Chief
Platt panelstöd
RSA315
Läs nedan 📖 manual på svenska för Chief RSA315 (2 sidor) i kategorin Platt panelstöd. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
8850-000158 Rev03
©2010 Milestone AV Technologies,
a Duchossois Group Company
11/10
Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
I N S T A L L A T I O N I N S T R U C T I O N S
SSB-315, SSM-315, SLB-315 and SLM-315 Interface Brackets
SSB-315, SSM-315, SLB-315 and SLM-315 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific
installation instructions provided with the mount for additional installation information.
Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!
Installation Instructions
WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.
NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.
1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
2. Turn projector upside down on a flat surface.
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
continued....
(1) Interface Bracket (3) Screw, Phillips Flat Head, Machine, M3 x 16mm
(4) 10-24 Thumb Nuts ** (3) Screw, Phillips Flat Head, Machine, M3 x 20mm
(1) All-Points Security Kit (3) Spacer, Black, .375" x .171" x .4375"
(6) Spacer, White, .375" x .194" x .3125"
**Only used when installing SLB/SSB interface brackets.
NOTE: Specific to SSB-style and SSM-style interface bracket installation: All appropriate screws come pre-installed in the circled locations
above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interfac
e bracket installation.
Note: SSB-style interface bracket connections are circled. Note: SSM-style interface bracket connections are circled.
SLB-315 SLM-315
Towards front
of projector Towards front
of projector
I N S T A L L A T I O N I N S T R U C T I O N S
Continued....
IMPORTANT ! : Some projector models may not be listed at this time. Follow instructions for the various install options after
you have determined which option matches your projector model.
WARNING: IF A BRACKET IS TOO LOOSE THE PROJECTOR COULD BE DAMAGED OR A FASTENER COULD BE TWISTED
OFF. If a bracket seems loose, move to try the next installation option.
3. Verify if your projector model is listed for a recommended install option. If your projector model is NOT listed, start with Option 1 and
work through options one at a time.
4. Place the correct spacers according to the option for your projector model.
• OPTION 1: Center three .3125" white spacers over three threaded inserts in bottom of projector.
• : Center three .4375" black spacers over three threaded inserts in bottom of projector.OPTION 2
• OPTION 3: Use six .3125" white spacers, double-stacked, and place over three threaded inserts in bottom of projector.
5. Place interface bracket on top of spacers aligning the mounting holes in the interface bracket with the holes in the spacers.
6. Select the correct fasteners according to the option for your projector model.
• OPTION 1 : Use three M3 x 16mm screws and secure interface bracket to projector by threading screws through bracket and spacers
and into threaded inserts in bottom of projector.
• OPTION 2 : Use three M3 x 16mm screws and secure interface bracket to projector by threading screws through bracket and spacers
and into threaded inserts in bottom of projector.
• OPTION 3: Use three M3 x 20mm screws and secure interface bracket to projector by threading screws through bracket and spacers
and into threaded inserts in bottom of projector.
7. Tighten all fasteners at this time, securing the bracket to the projector.
Projector Models
Option 1 DELL® Models 2300MP, 5100MP
Option 2 DELL Models: 2100MP, 2200MP, 3200MP, 3300MP
HP® Models: sb21, xb31
Optoma® Models: H30,EP731,EP732,EP732B, EP732E,EP732H, EP737
Option 3 DELL Model 4100MP
Produktspecifikationer
| Varumärke: | Chief |
| Kategori: | Platt panelstöd |
| Modell: | RSA315 |
Behöver du hjälp?
Om du behöver hjälp med Chief RSA315 ställ en fråga nedan och andra användare kommer att svara dig
Platt panelstöd Chief Manualer
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
Platt panelstöd Manualer
- Platt panelstöd Samsung
- Platt panelstöd HP
- Platt panelstöd Pioneer
- Platt panelstöd Abus
- Platt panelstöd Acco
- Platt panelstöd Akai
- Platt panelstöd Icy Box
- Platt panelstöd Hitachi
- Platt panelstöd Gembird
- Platt panelstöd SilverStone
- Platt panelstöd LC-Power
- Platt panelstöd GPX
- Platt panelstöd Blaupunkt
- Platt panelstöd Manhattan
- Platt panelstöd Tripp Lite
- Platt panelstöd Vision
- Platt panelstöd Kensington
- Platt panelstöd Nabo
- Platt panelstöd Nec
- Platt panelstöd Techly
- Platt panelstöd BlueBuilt
- Platt panelstöd Da-Lite
- Platt panelstöd Luxor
- Platt panelstöd Steren
- Platt panelstöd Iiyama
- Platt panelstöd Barkan
- Platt panelstöd Marantz
- Platt panelstöd Digitus
- Platt panelstöd Insignia
- Platt panelstöd Sanus
- Platt panelstöd Peerless-AV
- Platt panelstöd Vogels
- Platt panelstöd Fellowes
- Platt panelstöd Dell
- Platt panelstöd Planar
- Platt panelstöd Sven
- Platt panelstöd Konig
- Platt panelstöd Valueline
- Platt panelstöd One For All
- Platt panelstöd Ematic
- Platt panelstöd Newstar
- Platt panelstöd Apart
- Platt panelstöd Ewent
- Platt panelstöd HQ
- Platt panelstöd BakkerElkhuizen
- Platt panelstöd Ultimate
- Platt panelstöd Wentronic
- Platt panelstöd Peerless
- Platt panelstöd Proaim
- Platt panelstöd Monoprice
- Platt panelstöd Ergotron
- Platt panelstöd Gabor
- Platt panelstöd Konig & Meyer
- Platt panelstöd Premier
- Platt panelstöd Atdec
- Platt panelstöd StarTech.com
- Platt panelstöd SIIG
- Platt panelstöd Bell'O
- Platt panelstöd B-tech
- Platt panelstöd Speaka
- Platt panelstöd Crimson
- Platt panelstöd Kogan
- Platt panelstöd Panduit
- Platt panelstöd Schwaiger
- Platt panelstöd Premier Mounts
- Platt panelstöd Cabstone
- Platt panelstöd Elite Screens
- Platt panelstöd Kanto
- Platt panelstöd V7
- Platt panelstöd Kondator
- Platt panelstöd Bretford
- Platt panelstöd SmartMetals
- Platt panelstöd Unicol
- Platt panelstöd Anthro
- Platt panelstöd Alogic
- Platt panelstöd Equip
- Platt panelstöd Zaor
- Platt panelstöd Dataflex
- Platt panelstöd Multibrackets
- Platt panelstöd AMX
- Platt panelstöd Rocstor
- Platt panelstöd CTA Digital
- Platt panelstöd Amer
- Platt panelstöd SunBriteTV
- Platt panelstöd Avteq
- Platt panelstöd Walker Edison
- Platt panelstöd My Wall
- Platt panelstöd Mount-It!
- Platt panelstöd LTN Technologies
- Platt panelstöd Heckler
- Platt panelstöd Helder
- Platt panelstöd NeoMounts
Nyaste Platt panelstöd Manualer
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025