Chief SLB275 Bruksanvisning

Chief Platt panelstöd SLB275

Läs nedan 📖 manual på svenska för Chief SLB275 (1 sidor) i kategorin Platt panelstöd. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8802-002072 Rev00

a Duchossois Group Company

11/10

SSB-275, SSM-275, SLB-275 and SLM-275 Interface Brackets

SSB-275, SSM-275, SLB-275 and SLM-275 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place the interface bracket onto the bottom of the projector, aligning the mounting holes in the bracket with the threaded inserts in the

bottom of the projector and ensuring that triangle in bracket points towards front of projector.

4. Position M6 x 10mm mounting screws with M6 flat washers into the threaded inserts and three bracket side tabs. Position 1/2" tall spacer

underneath threaded insert and mounting hole at front of interface bracket. Place the M6 x 20mm screw into the threaded insert and

mounting hole at front of interface bracket and through 1/2" spacer. Tighten all fasteners at this time, securing the bracket to the projector.

NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation

instructions in the All-Points Security Kit.

(1) Interface Bracket (3) Screw, Phillips Pan Head, Machine, M6 x 10mm

(4) 10-24 Thumb Nuts ** (1) Screw, Phillips Flat Head, Machine, M6 x 20mm

(3) Washer, M6

(1) All-Points Security Kit (1) 5/32" Hex Key

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation: All appropriate screws come pre-installed in the circled locations above.

DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interface bracket installation.

Note: SSB-style interface bracket connections are circled. Note: SSM-style interface bracket connections are circled.

SLB-275 SLM-275

Towards front

of projector

Towards front

of projector

(1) Nylon Spacer, 1/2" x .316" x 1/2"

Produktspecifikationer

Varumärke:	Chief
Kategori:	Platt panelstöd
Modell:	SLB275
Enhetsplacering:	Volledig ingebouwd
Typ av operation:	Touch
Inbyggd display:	Ja
Vikt:	38600 g
Bredd:	598 mm
Djup:	550 mm
Höjd:	815 mm
Nettoskatt:	2400 W
Antal platsinställningar:	14 couverts
Automatiska program:	Ja
Torksystem:	Warmtewisselaar
Dörrfärg:	Niet van toepassing
Sladdlängd:	1.75 m
Fördröjd starttimer:	Ja
Startfördröjning:	24 uur
Indikering av återstående tid:	Ja
Avtagbar topp:	Nee
Wi-Fi-kontroll:	Ja
Cykelns längd:	215 min
Ljudnivå:	42 dB
Energie-efficiëntieklasse:	B
Installationsfackets bredd:	600 mm
Installationsfack djup:	550 mm
Installationsfack höjd:	815 mm
Vattenförbrukning per cykel:	9 l
Nuvarande:	10 A
Installationsfack höjd (min):	875 mm
Bulleremissionsklass:	B
Antal tvättprogram:	8
Energiförbrukning per 100 cykler:	65 kWu
Justerbara fötter:	Ja
Djup när dörren är öppen:	1150 mm
Produktstorlek:	Volledige grootte (60 cm)
Typ av bästa fack:	Lade
Fötter justering:	60 mm
Golvindikatorlampa:	Ja
Färdig att använda indikatorlampa:	Ja
Saltindikator:	Ja
Sköljmedelsindikator:	Ja
Doseringsassistent:	Ja
AquaStop-funktion:	Ja
AquaSensor funktion:	Ja
Glasskydd:	Ja
Tvättprogram:	60min 65°C, Auto 45-65°C, Delicate 40°C, Eco 50°C, Favorite, Intensive 70°C, Quick 45min, Silent 50°C
Energiförbrukning per cykel:	0.645 kWu
Avloppsslangens längd:	1.9 m
Vattentillförselslangens längd:	1.65 m
Temperatur (max):	70 °C
Höjd under bänkskiva:	0 mm
Korgar justerbar placering:	Bovenste
Fjärrstöd för smartphone:	Ja
Strömförbrukning (behåll den på):	4 W
Strömförbrukning (när avstängd):	0.5 W
Styr appar som stöds:	Home Connect
AC-ingångsspänning:	220 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Energieffektivitetsskala:	A tot G