Chief SLM220 Bruksanvisning

Chief Projektor tillbehör SLM220

Läs nedan 📖 manual på svenska för Chief SLM220 (1 sidor) i kategorin Projektor tillbehör. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8802-000025 Rev02

a Duchossois Group Company

05/09

SSB-220, SSM-220, SLB-220 and SLM-220 Interface Brackets

SSB-220, SSM-220, SLB-220 and SLM-220 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUPIMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place the interface bracket onto the bottom of the projector and align the holes in the bracket with the threaded inserts on the bottom of

the projector.

4. Position M4 x 10mm pan head mounting screws with M4 washers into the mounting holes. Tighten all fasteners at this time, securing the

bracket to the projector.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions

in the All-Points Security Kit.

(1) Interface Bracket (3) Washer, Flat, M4

(4) 10-24 Thumb Nuts ** (3) Screw, Phillips Pan Head, M4 x 10mm

(1) All-Points Security Kit (1) 5/32" Hex Key

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-220 SLM-220

(Note: SSB- style interface br acke t conn ection s

)

(Note: SS M-style inte rface

are enc ircled)

Towards front of

projector

Towards front of

projector

Produktspecifikationer

Varumärke:	Chief
Kategori:	Projektor tillbehör
Modell:	SLM220
Färg på produkten:	Zwart
Förpackningens vikt:	1692.4 g
Förpackningens bredd:	204 mm
Djuppackning:	176 mm
Förpackningshöjd:	139 mm
Snäll:	Zender en ontvanger
LED-indikatorer:	Ja
Anslutningsteknik:	Bedraad
Medföljande kablar:	KVM
Inkluderar AC-adapter:	Ja
Ursprungsland:	Taiwan
Antal USB 2.0-portar:	2
Upplösning (maximal analog):	1920 x 1200 Pixels
Material:	Metaal
Hållbarhetscertifikat:	CE, Federal Communications Commission (FCC), UKCA, WEEE
Plug and play:	Ja
On Screen Display (OSD):	Ja
Förvaringstemperatur:	-5 - 65 °C
Firmware-uppgradering möjlig:	Ja
Förvaringsfuktighet:	5 - 95 procent
Överensstämmelse med hållbarhet:	Ja
Snabbinstallationsguide:	Ja
(Ytter) huvudpaketets höjd:	430 mm
(Ytter) huvudförpackningens bredd:	440 mm
(Ytter) huvudförpackningens bruttovikt:	21300 g
(Ytre) huvudpaketets längd:	370 mm
Kvantitet per (yttre) huvudkartong:	12 stuk(s)
Maximal-räckvidd:	100 m
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	5 - 95 procent
Pall bruttohöjd:	115 mm
Pallboskapsras:	1350 mm
Pall bruttolängd:	940 mm
Sändarens bredd:	131 mm
Sändarens djup:	65 mm
Sändarens höjd:	26 mm
Mottagarens vikt:	586 g
Sändarens vikt:	586 g
Kabeltyper som stöds:	Cat5, Cat5e
Mottagarens bredd:	131 mm
Mottagarens djup:	65 mm
Mottagarens höjd:	26 mm
Porttyp sändare video:	VGA
Porttyp sändare lokalt tangentbord/mus:	USB
USB-porttyp:	USB Type-B
Typ av lokal videomottagare:	VGA
Mottagarporttyp lokalt tangentbord/mus:	USB
Antal RJ-45-portar (mottagare):	1
Antal RJ-45-portar (sändare):	1
Sändarens lokal videoport:	Ja
Porttyp sändare lokal video:	VGA
Val av KVM-port:	Hotkeys, Push-buttons