Chief SLM780 Bruksanvisning

Läs nedan 📖 manual på svenska för Chief SLM780 (1 sidor) i kategorin Projektor tillbehör. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
8802-000076 04/11/03
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
I
NSTALLATION
I
NSTRUCTIONS
SLB-780 H
ANGER
B
RACKET
for Toshiba TLP-780,
Prior to assembly, unpack carton and verify contents.
For security installation, use security hardware package inside the ALL-POINTS™
Security Kit. Follow the instructions below for attaching the bracket to the projector
using either standard hardware or security hardware.
If you are missing any of the following components, please contact Customer Service at
1-800-582-6480
(1) SLB-780 Bracket (4) 10 - 24 Thumb Nuts
(2) M4 - 12mm Screws (2) M4 Flatwashers
(2) M3 - 6mm Screws (2) M3 Flatwashers
(2) Rubber Bump-on
I
NSTALLATION
I
NSTRUCTIONS
1. Turn projector upside down.
2. Using the two-rubber bump-ons, push them through the two larger holes in the bracket
from the bottom side so they are between the projector and the bracket.
3. Place the SLB-780 bracket on to the bottom of the projector lining up the four mounting
holes in the SLB-780 bracket with the four threaded inserts in the bottom of the projector
and secure using the two M4 -12mm mounting screws and M4 Flatwashers on the bottom
holes and the two M3 -6mm mounting screws and M3 Flatwashers on the back holes.
Only tighten screws until the rubber bump-on’s start to slightly deform. CAUTION:
When attaching the mount be careful not to overtighten screws.
4. See RPA and/or Smart-Lift™ Instructions.

Produktspecifikationer

Varumärke: Chief
Kategori: Projektor tillbehör
Modell: SLM780

Behöver du hjälp?

Om du behöver hjälp med Chief SLM780 ställ en fråga nedan och andra användare kommer att svara dig




Projektor tillbehör Chief Manualer

Projektor tillbehör Manualer

Nyaste Projektor tillbehör Manualer