Chief SSB102 Bruksanvisning

Chief Projektor tillbehör SSB102

Läs nedan 📖 manual på svenska för Chief SSB102 (1 sidor) i kategorin Projektor tillbehör. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8850-000092 Rev01

a Duchossois Group Company

05/09

SSB-102, SSM-102, SLB-102 and SLM-102 Interface Brackets

SSB-102, SSM-102, SLB-102 and SLM-102 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing Interface bracket.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips Pan Head Screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place 1/4" spacers over the threaded inserts in bottom of projector.

4. Place interface bracket onto projector and align spacers and mounting holes.

5. Using M5 x 16mm Phillips pan head screws and flat washers, secure interface bracket to projector and tighten all fasteners at this time.

NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the

All-Points Security Kit.

(1) Interface Bracket (3) Screw, Phillips Pan Head, Machine, M5 x 16mm ****

(4) 10-24 Thumb Nuts ** (3) Washer, Flat, M5

(1) All-Points Security Kit (3) 1/2" x .218" x 1/4" Nylon Spacer ****

**Only used when installing SLB/SSB interface brackets. ****Used when mounting surface of projector is recessed.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-102 SLM-102

Towards front of

projector

Towards front of

projector

(Note: SSM-style interface bracket co nnections

)

(

Note: SSB-style interface bracket connections

)

Produktspecifikationer

Varumärke:	Chief
Kategori:	Projektor tillbehör
Modell:	SSB102
Enhetsplacering:	Ingebouwd
Typ av operation:	Touch
Färg på produkten:	Zwart
Antal effektnivåer:	9
Inbyggd display:	Ja
Timer:	Ja
Bredd:	880 mm
Djup:	520 mm
Höjd:	- mm
Grill:	Nee
Barnlås:	Ja
Håll varm funktion:	Ja
Typ av material (överst):	Glas
Brännare/kokzonseffekt 2:	2100 W
Brännare/kokzonseffekt 3:	2100 W
Brännare/kokzonseffekt 1:	2100 W
Antal brännare/kokzoner:	4 zone(s)
Typ av häll:	Inductiekookplaat zones
Brännare/kokzon typ 1:	Regulier
Brännare/kokzon typ 2:	Regulier
Typ av brännare/kokzon 3:	Regulier
Lätt att städa:	Ja
Antal gasbrännare:	0 zone(s)
Antal elektroniska kokzoner:	4 zone(s)
Normal brännare/kokzon:	2100 W
Kontrollposition:	Boven voorzijde
Ansluten last (elektrisk):	- W
Installationsfackets bredd:	810 mm
Installationsfack djup:	490 mm
Tillgångar:	11100 W
Ansluten last (gas):	- W
Skriv timer:	Digitaal
Forma vanlig brännare/kokzon:	Rechthoekig
Boost funktion:	Ja
Antal boosters:	4
Förstärk normal brännare/häll:	2600 W
Restvärmeindikator:	Ja
Mått (B x D) normal brännare/kokzon:	220 x 180 mm
Brofunktion:	Ja
Typ av brännare/kokzon 4:	Regulier
Brännare/kokzonseffekt 4:	2100 W
Strömkälla brännare/kokzon 1:	Electrisch
Strömkälla brännare/kokzon 2:	Electrisch
Strömkälla brännare/kokzon 3:	Electrisch
Strömkälla för brännare/kokzon 4:	Electrisch
Kookzone 1 boost:	2600 W
Kookzone 2 boost:	2600 W
Kookzone 3 boost:	2600 W
Kookzone 4 boost:	2600 W
Placera brännare/kokzon 1:	Links achter
Placera brännare/kokzon 2:	Links voor
Placera brännare/kokzon 3:	Rechts achter
Placera brännare/kokzon 4:	Rechts voor
Kokzon 1 form:	Rechthoekig
Kokzon 2 form:	Rechthoekig
Stop-and-go-funktion:	Ja
Kokzon 3 form:	Rechthoekig
Kokzon 4 form:	Rechthoekig
Kokzon 2 storlek (BxD):	180 x 220 mm
Kokzon 4 storlek (BxD):	180 x 220 mm
Kokzon 1 storlek (BxD):	180 x 220 mm
Kokzon 3 storlek (BxD):	180 x 220 mm
Kokzon 2 dubbel boost:	5500 W
Kokzon 3 dubbel boost:	5500 W
Kokzon 1 dubbel boost:	5500 W
Kokzon 4 dubbel boost:	5500 W