Chief SSM119 Bruksanvisning

Chief Projektor tillbehör SSM119

Läs nedan 📖 manual på svenska för Chief SSM119 (1 sidor) i kategorin Projektor tillbehör. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8850-000109 Rev01

a Duchossois Group Company

05/09

SSB-119, SSM-119, SLB-119 and SLM-119 Interface Brackets

SSB-119, SSM-119, SLB-119 and SLM-119 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUPIMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place the 5/8" nylon spacers over the threaded inserts in the bottom of the projector.

4. Place the interface bracket onto the 5/8" nylon spacers on the bottom of the projector and align the mounting holes in the bracket with

nylon spacers.

5. Using the M6 x 25mm screws, position screws into the threaded inserts. Tighten all fasteners at this time, securing the bracket to the

projector.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation

instructions in the All-Points Security Kit.

(1) Interface Bracket (4) 1/2" x .257 x 5/8" Nylon Spacer

(4) 10-24 Thumb Nuts ** (4) M6 -25mm Phillips Pan Screws

(1) All-Points Security Kit (4) M6 Flat washer

(1) Wrench, Hex, 5/32"

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-119 SLM-119

Towards front of

projector

Towards front of

projector

(Note: SSM-style interface bracket connections

)

(

Note: SSB-style interface bracket connections

)

Produktspecifikationer

Varumärke:	Chief
Kategori:	Projektor tillbehör
Modell:	SSM119
Enhetsplacering:	Ingebouwd
Typ av operation:	Draaiknop
Färg på produkten:	Roestvrijstaal
Inbyggd display:	Nee
Bredd:	590 mm
Djup:	500 mm
Höjd:	43 mm
Förpackningens vikt:	13000 g
Förpackningens bredd:	660 mm
Djuppackning:	600 mm
Förpackningshöjd:	180 mm
Typ av material (överst):	Roestvrijstaal
Brännare/kokzonseffekt 2:	2700 W
Brännare/kokzonseffekt 3:	1000 W
Brännare/kokzonseffekt 1:	1750 W
Antal brännare/kokzoner:	4 zone(s)
Typ av häll:	Gaskookplaat
Elektronisk tändning:	Ja
Brännare/kokzon typ 1:	Regulier
Brännare/kokzon typ 2:	Groot
Typ av brännare/kokzon 3:	Sudderen
Antal gasbrännare:	4 zone(s)
Antal elektroniska kokzoner:	0 zone(s)
Sjud brännare/kokzon:	1000 W
Normal brännare/kokzon:	1750 W
Kontrollposition:	Boven voorzijde
Installationsfackets bredd:	560 mm
Installationsfack djup:	480 mm
Installationsfack höjd:	35 mm
Stor brännare/kokzon:	2700 W
Ansluten last (gas):	7200 W
Pannstödsmaterial:	Gietijzer
Säkerhetsventil:	Ja
Typ av brännare/kokzon 4:	Regulier
Brännare/kokzonseffekt 4:	1750 W
Strömkälla brännare/kokzon 1:	Gas
Strömkälla brännare/kokzon 2:	Gas
Strömkälla brännare/kokzon 3:	Gas
Strömkälla för brännare/kokzon 4:	Gas
Placera brännare/kokzon 1:	Links
Placera brännare/kokzon 2:	Midden achter
Placera brännare/kokzon 3:	Midden voor
Placera brännare/kokzon 4:	Rechts
Kokzon 1 form:	Rond
Kokzon 2 form:	Rond
Kokzon 3 form:	Rond
Kokzon 4 form:	Rond