Chief SSM143 Bruksanvisning

Chief Projektor tillbehör SSM143

Läs nedan 📖 manual på svenska för Chief SSM143 (1 sidor) i kategorin Projektor tillbehör. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8850-000132 RevB

a Duchossois Group Company

05/09

SSB-143, SSM-143, SLB-143 and SLM-143 Interface Brackets

SSB-143, SSM-143, SLB-143 and SLM-143 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface bracket.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place the 1/2" nylon spacers over the threaded inserts in the bottom of the projector.

4. Place the interface bracket onto the nylon spacers on the bottom of the projector and align the mounting holes in the bracket with the nylon

spacers.

5. Using the M4 x 20mm screws, position screws into the threaded inserts. Tighten all fasteners at this time, securing the bracket to the

projector.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation

instructions in the All-Points Security Kit.

(1) Interface Bracket (3) Screw, Phillips Flat Head, Machine, M4 x 20mm ****

(4) 10-24 Thumb Nuts ** (3) 1/2" x .194" x 1/2" Round Spacer ****

(1) All-Points Security Kit

**Only used when installing SLB/SSB interface brackets. ****Used when mounting surface of projector is recessed.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-143 SLM-143

Towards front of

projector

Towards front of

projector

(Note: SSM-style interface bracket connection

)

(

Note: SSB-style interface bracket connections

)

Produktspecifikationer

Varumärke:	Chief
Kategori:	Projektor tillbehör
Modell:	SSM143
Enhetsplacering:	Ingebouwd
Typ av operation:	Touch
Färg på produkten:	Zwart
Antal effektnivåer:	9
Bredd:	900 mm
Djup:	450 mm
Höjd:	53 mm
Barnlås:	Ja
Förpackningens vikt:	14000 g
Förpackningens bredd:	960 mm
Djuppackning:	500 mm
Förpackningshöjd:	100 mm
Typ av material (överst):	Glaskeramiek
Brännare/kokzonseffekt 2:	1100 W
Brännare/kokzonseffekt 3:	2300 W
Brännare/kokzonseffekt 1:	2300 W
Antal brännare/kokzoner:	3 zone(s)
Typ av häll:	Inductiekookplaat zones
Brännare/kokzon typ 1:	Regulier
Brännare/kokzon typ 2:	Sudderen
Typ av brännare/kokzon 3:	Regulier
Antal gasbrännare:	0 zone(s)
Antal elektroniska kokzoner:	3 zone(s)
Sjud brännaren/kokzonens diameter:	160 mm
Vanlig brännare/kokzonsdiameter:	200 mm
Sjud brännare/kokzon:	1100 W
Normal brännare/kokzon:	2300 W
Kontrollposition:	Boven voorzijde
Installationsfackets bredd:	884 mm
Installationsfack djup:	434 mm
Boost funktion:	Ja
Strömkälla brännare/kokzon 1:	Electrisch
Strömkälla brännare/kokzon 2:	Electrisch
Strömkälla brännare/kokzon 3:	Electrisch
Placera brännare/kokzon 1:	Links
Diameter brännare/kokzon 1:	200 mm
Placera brännare/kokzon 2:	Midden achter
Brännare/kokzons diameter 2:	160 mm
Placera brännare/kokzon 3:	Rechts
Brännare/kokzons diameter 3:	200 mm
Kokzon 1 form:	Rond
Kokzon 2 form:	Rond
Kokzon 3 form:	Rond
AC-ingångsspänning:	220 - 230 V
AC-ingångsfrekvens:	50 - 60 Hz